New Style Magnifying Lens Issue
-
I only have two newer style mag SAKs. One SwissChamp and one Explorer. Both seem flimsy and the Champ lense has fallen out a few times. Since then I have tried to find older SAKs with the much superior grey magnifier frame. Vic really needs to rethink the translucent mag frames. I'd much rather has a smaller magnifier that didn't fall out
In fact, at least with the champ and explorer, I'd like to see the old layer brought back with the longer phillips driver. -
Me too G Man! I haven't had this issue yet, but prefer the quality of the older style with the longer reach and additional torque of the older Philips.
-
I've probably had 100 or so of the new style mag glasses pass through my shop. None have ever come out on their own but I do notice it takes very little pressure to remove them. I hope it's not a glass lens tolerance issue or something asnall the ones I have had have been consistently sized to fit the brass housing I make.
-
@pfrsantos said:
I thought of that, too. Have no idea how to fix it, if that's the case. Any cracks on the frame?

No cracks on the frames...thanks for replying.

-
I don't know if using a hot air gun in the frame to soften it a bit and then press it around the lens is a good idea...

Probably not...

-
@gerleatherberman said:
I only have two newer style mag SAKs. One SwissChamp and one Explorer. Both seem flimsy and the Champ lense has fallen out a few times. Since then I have tried to find older SAKs with the much superior grey magnifier frame. Vic really needs to rethink the translucent mag frames. I'd much rather has a smaller magnifier that didn't fall out
In fact, at least with the champ and explorer, I'd like to see the old layer brought back with the longer phillips driver.I think I prefer the old layer too since it is getting to where I hate to open the magnifier because I am expecting the lens to drop out.
Thanks for replying

-
If you're feeling brave, some carefully placed cyanoacrylate adhesive(super glue) should do the trick. But, I am not really happy when I have to fix something that is brand new.

If you have the plastic lens magnifier(2005-2011?), then I wouldn't touch it with super glue. I would try it on the newer glass lenses in the translucent frames though. -
GLBM:
The previous lenses were completely made from 1 piece.
If that lens would fall out on itself, I'd eat my shoe ;) -
@gerleatherberman said:
If you're feeling brave, some carefully placed cyanoacrylate adhesive(super glue) should do the trick. But, I am not really happy when I have to fix something that is brand new.
If you have the plastic lens magnifier(2005-2011?), then I wouldn't touch it with super glue. I would try it on the newer glass lenses in the translucent frames though.The next time a lens falls out I might try putting 2 dots of Super Glue diametrically opposed to each other so as not to take much chance of getting super glue all over the lens....thanks for the suggestion

-
@Mechanickal said:
GLBM:
The previous lenses were completely made from 1 piece.
If that lens would fall out on itself, I'd eat my shoe ;)Thank you for the correction. I didn't even realize those were one piece. None of my SAKs are from those years.

If you're feeling brave, some carefully placed cyanoacrylate adhesive(super glue) should do the trick. But, I am not really happy when I have to fix something that is brand new.

If you have the plastic lens magnifier(2005-2011?), then I wouldn't touch it with super glue. I would try it on the newer glass lenses in the translucent frames though.The next time a lens falls out I might try putting 2 dots of Super Glue diametrically opposed to each other so as not to take much chance of getting super glue all over the lens....thanks for the suggestion

That should work great. Kind of like vintage watch crystals. :)
I was thinking of doing the whole circumference, but two or three micro-dots would be just as effective.
-
@gerleatherberman said:
I was thinking of doing the whole circumference, but two or three micro-dots would be just as effective.
But what if I want to take it swimming?

-
I was thinking of doing the whole circumference, but two or three micro-dots would be just as effective.

But what if I want to take it swimming?

Like you took that Spirit? ::)
-
@Don Pablo said:
I was thinking of doing the whole circumference, but two or three micro-dots would be just as effective.

But what if I want to take it swimming?

Like you took that Spirit? ::)
Drying at the moment:

-
I don't like sand. It's coarse and rough and irritating and it gets everywhere. Not like here. Here everything is soft and smooth.
-
IMHO the best way to establish once for all if there is really an issue with those new mags is to do nothing in case one falls out.
nothing, short of applying for warranty repair. If no one bothers, Victorinox will never be officialy aware of the potential problem,
and will never try to fix it if needed. -
@Ptisuisse said:
IMHO the best way to establish once for all if there is really an issue with those new mags is to do nothing in case one falls out.
nothing, short of applying for warranty repair. If no one bothers, Victorinox will never be officialy aware of the potential problem,
and will never try to fix it if needed.This might be the best option yet. Is there a Victorinox official store/dealership near you?
-
@pfrsantos said:
This might be the best option yet. Is there a Victorinox official store/dealership near you?There are no Official Victorinox store/dealerships near where I live.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login