Powerlock 30-day challenge
-
Pretty sure there is a piano lock version as well.
-
On the other side of that coin (metaphorically, regarding us on MT.o, testing the designs and giving input back to the MT makers), we could also conclude, that we may never reach any kind of consensus on what is best. For example: there is significant amount of members here who claim the Vic Spirit is "MT perfection", but there is also a significant portion of us who believe otherwise. The old saying that "all MTs, in essence, are a compromise" seems to be a fact.
The best case scenario leaves us with a tool, that maybe, half of us would like.

I am just brain farting here. :ahhh
-
@gerleatherberman said:
Nix,Thought you might like to see how little SOG has changed the PowerLock since 1998. Aside from the pliers and gear covers,
The older PL is a pre-pat #(likely 1998) and the newer one is a 2018 model with v-cutter, instead of scissors.hey GLBM you beat me at it again, as I was just going to comment on Nix's post from DAY 13:
@gerleatherberman said:
"Day 13:
Carried the Powerlock in the back pocket of my jeans. Actually worked fairly well, no issues, and I may try carrying it this way a bit more. A pocket caddy might be a good idea as well. "and I was going to tell him "you're lucky that you got a new PL with gear cover,a s if you tried to pocket carry one of the older models you'd realise how awkward and painful a multitool can be :D
I can talk from experience as my first PL didn't have those covers and that shredded all the pouches
, sheaths and textiles where it was carried,
it hung up and got stuck and it ripped and tore them ::), I can't imagine what it'd do in a pants pocket moving around and so :ahhh :o@gerleatherberman said:
SOG should advertise "We include mediocre scissors, but Leatherman scissors fit better". :D"...and they also cut better too"

@Nix said:
El Peacent has called the Powerlock a 'beast'. Well......all things are relative...right?
that Trailmaster is a very nice piece
and that wrapping will prevent the Kraton from wearing out too soon and peeling away, a common issue with Cold Steel's rubbery handles. :P Is your knife in Carbon V?

-
Yup, that one is in Carbon V.

-
Day 14:
Decided to test the file today......
First got out my old beater axe.
And found that both the single cut and double cut sides of the file just skated off the hard cutting edge. This is a fail.
I tested the two sides and the skinnier 'saw' side on the heel of the axe (softer) and found they would bite in to some degree. So, I think this is more an issue of poor hardening than anything else. However, I'm not too impressed by the way the file's lands and grooves were cut.

So then the question became: "what else will it work on?"
I had a recently sharpened lawn mower blade that still had a fine burr on the edge. The single cut side was able to take this burr off. So that is kinda handy.
The double cut side did a decent--if limited--job of rasping off the sharp corner of a scrap piece of hard Maple. That was nice, too.
The 'saw' edge was able to cut a notch into the same block of Maple. And with a bit of effort, it started cutting a notch in a 20d nail. The double cut side was able to scratch up the nail as well, so it might be able to sharpen some softer metals. Which is something, I suppose.

Overall, the file is lame and not terribly useful, but I could envision it being pressed into service in some odd situations.
Clearly further testing is indicated......
-
So scissors and the file are still no good then

-
So scissors and the file are still no good then

Uhhhhh......seen from a certain angle.......uhhhhh......yeah.

And the Powerlock doesn't have all the features of the PowerAccess Deluxe.......but it's 'better'.

if it's better than the PAD, then it's a Powerlock *Deluxe * *Gourmet *:D
-
So scissors and the file are still no good then

Uhhhhh......seen from a certain angle.......uhhhhh......yeah.

And the Powerlock doesn't have all the features of the PowerAccess Deluxe.......but it's 'better'.

I would like to think SOG made a good
MT at some stage but i am not seeing this

-
Day 14 (continued):
Used the 1/4" drive and a Allen Hex bit to install some homemade wooden scales on my BK7.

The 1/4" drive is a neat feature of this and other SOG multi's. I do wish my 1/4" bit adapter were magnetized and held the bits more securely. The SOG has a small spring clip to help the 1/4" driver to 'snap' into the adapter, but it's fairly easy for the the hex bit to fall out, if so guided by gravity's mischievous hand.
The Powerlock fits neatly into the accessory pouch of the BK7's sheath. Might try carrying it this way for a day hike or camping trip.

-
Excellent work on the wooden scales Nix

It’s like the sheath was designed for a MT

-
Ha ha ha, yes. It may have been so designed.
And thanks!

-
Those wood handles you made.

My only wood-handle custom is so smurfed-looking I am almost too embarrassed to post it. It went well until I drilled the hole for a screw/nut and splintered it out in the center.
-
I was super careful with these.

-
The wood scales look amazing Nix. You did a great job on them.

-
Thanks, Alan!
It was a fun project. (Using scrap wood...
) 
-
Day 14 (continued):
Decided to share a piece of delicious chocolate with oranges and almonds with Mrs Nix this evening. Obviously, breaking it cleanly in half was fairly important.
I used the awl to score the chocolate bar in half (more or less) and then snap it cleanly. One of the awl uses Mrs Nix really appreciates.

-
I could soo do with some chocolate right about now.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

