Need to understand "Rebar Love"
-
Jogging my memory of the good ole days when there were more Charges to choose from....
Makes me so wish LM would get back to more variety on some of their other tools as well. Knifeless REBAR is great but there are unlimited configurations they could be offering.
Who wants to see a Wave+ with the 3D Phillips and flat drivers like the original? Or at least make availalable more long bits like the MUT

Hmmmmm
-
Unfortunately I never got the chance to try out the file. I did at least check it out and I think I would have liked the agressivness of it but I also realy like the diamond file side on the Wave and Surge. I do agree that I don't think I would have liked the slot in it at all. During the time I got to use mine befor loosing it I really liked the pliars agressive bite and how wide an opening they have. I also liked the shape and robustness of the phillips.
-
Douglas,
I feel your pain in losing your Rebar. I just lost a Buck knife I JUST bought, the first day I carried it. Not life changing, but sucks nonetheless. :ahhh
Sawman,
I wish LM (or someone) would make a "build an MT program". I would pay extra for a fully customized tool from the factory that was warranted.

-
+1 +1 +1 +1................................................................

-
@Douglas said:
+1 +1 +1 +1................................................................
+1... fully agreed. Although Loki does his best to provide original parts, so tool transplants are at least possible without involving (sacrificing) another tool.
As to the file, I had better experiences with the Wave one so I transplanted one of those into the Rebar VX. The single-cut side of the Rebar file is difficult to steer.
-
Day 6
On the way home and waiting for the ferry.
No, I'm not driving that big rig balancing on the pliers :D

-
Looks warm there......
Nice Rebar!
-
I failed on this challenge.
I thought I had a Rebar but it was a camo blast instead. Could have swore I had a Rebar.

-
Could you do the discontinued model challenge? If you haven't done it already. :)
-
Well Pacu,
At least you didn't loose yours between the drive way and the bedroom.Honestly I think mine got left under the hood of my son's truck when we were working on his lights and fell out some where between our place and his when he drove home.

We'll give it another go Pacu when we both have Rebars. At least here, we can both get a preview of what to expect.

-
Day 7
Back home and a little tired of yesterday's drive (German motorways allow for fast travel between the occasional snarls but are tiring). Record of longest stretch of uninterrupted summer days about to be broken in the country where the trip started, Denmark.
So, for the moment, a steam punk shot... maybe more to come today, but not sure.

-
Day 7 cont'd
Well, what do you know... yesterday on the ferry I thought I'd lost my watch (the one I got from my wife for my 40th) :'(. While unpacking after the drive I heard a sound and traced it to where said watch had fallen between two suitcases. The pin holding the wristband to the watch had bent and lost hold. I'm happy I found that watch again :ahhh
Bending the pin straight was no problem even with the Rebar. I compared it with the SOG PAD - its compound leverage pliers allow the user to apply a lot of force, which in this case however proved a tad too much as the pin's outer sleeve is of relatively thin-walled construction and was crushed a little, thus blocking the inner studs. Had to apply some force at 90° offset to release the inner studs and let the spring do its job again. Here, with the Rebar pliers it is much easier to dose the force to just the amount required, at the cost of maximum applicable force of course.
Then I used my Rebar VX's non-standard jeweler's screwdriver to re-insert the pin, lodged in the wristband, into its receiving holes in the watch housing. I'm glad I added this often derided tool :D




-
D_T. Those spring bars never act right after they've been bent and straightened. Learned that from experience. I would definitely, as a watch guy, recommend purchasing a cheap assorted spring bar kit. I have seen them as low as a few dollars before and you get a lot of different sized spring bars.
If you notice the band not seeming to feel snug between the case lugs, then the repaired spring bar is close to coming out. And that never ends well for you or the watch. :ahhh -
Thanks GLBM, I'll shop around for the assortment you mention. On superficial inspection though, the ends seemed springy enough and I have made sure they were well inserted in the holes - no problem so far one day after the repair ;)
-
Meanwhile, on Day 8, a short Sunday morning bike tour to get the pump up to revs again after some admittedly lazy days

The Rebar did not see any action, except for posing, to which it seems to be taking a liking :D

-
@Dutch_Tooler said:
Thanks GLBM, I'll shop around for the **assortment **you mention. On superficial inspection though, the ends seemed springy enough and I have made sure they were well inserted in the holes - no problem so far one day after the repair ;)Just found an offer in the Bay for € 5.00 incl. tool and shipping... :o - and pulled the trigger - thanks for the tip GLBM

-
Just don't drop the box!
Happened to me while moving places a year ago.
I don't think I'll ever sort them out... -
Some very great uses DT

I really do hate losing anything
I have misplaced a flashlight recently and it is bugging me to death :ahhh it has to be in the house but where I have no idea
This is been a great read so far though

-
Thanks GLBM, I'll shop around for the **assortment **you mention. On superficial inspection though, the ends seemed springy enough and I have made sure they were well inserted in the holes - no problem so far one day after the repair ;)
Just found an offer in the Bay for € 5.00 incl. tool and shipping... :o - and pulled the trigger - thanks for the tip GLBM


Awesome. That is a beautiul watch. :)
Best of luck with the Rebar challenge.

-
@Mechanickal said:
Just don't drop the box!Happened to me while moving places a year ago.
I don't think I'll ever sort them out...
sorry, I couldn't resist. But thanks, I'll take the utmost care

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login