Need to understand "Rebar Love"
-
@Dutch_Tooler said:
Thanks GLBM, I'll shop around for the **assortment **you mention. On superficial inspection though, the ends seemed springy enough and I have made sure they were well inserted in the holes - no problem so far one day after the repair ;)Just found an offer in the Bay for € 5.00 incl. tool and shipping... :o - and pulled the trigger - thanks for the tip GLBM

-
Just don't drop the box!
Happened to me while moving places a year ago.
I don't think I'll ever sort them out... -
Some very great uses DT

I really do hate losing anything
I have misplaced a flashlight recently and it is bugging me to death :ahhh it has to be in the house but where I have no idea
This is been a great read so far though

-
Thanks GLBM, I'll shop around for the **assortment **you mention. On superficial inspection though, the ends seemed springy enough and I have made sure they were well inserted in the holes - no problem so far one day after the repair ;)
Just found an offer in the Bay for € 5.00 incl. tool and shipping... :o - and pulled the trigger - thanks for the tip GLBM


Awesome. That is a beautiul watch. :)
Best of luck with the Rebar challenge.

-
@Mechanickal said:
Just don't drop the box!Happened to me while moving places a year ago.
I don't think I'll ever sort them out...
sorry, I couldn't resist. But thanks, I'll take the utmost care

-
Thanks GLBM, I'll shop around for the **assortment **you mention. On superficial inspection though, the ends seemed springy enough and I have made sure they were well inserted in the holes - no problem so far one day after the repair ;)
Just found an offer in the Bay for € 5.00 incl. tool and shipping... :o - and pulled the trigger - thanks for the tip GLBM


Awesome. That is a beautiul watch. :)
Best of luck with the Rebar challenge.

Thanks! I'd hate to lose it again...
-
Update: Have been faithfully carrying the Rebar everyday. Here's a pic of me using it to attach a new bicycle seat.

-
Why do people love the Rebar? Maybe some people love rusty tools?
-
Rusty? What rust? Mine don't (yet)... ???
-
I've seen little surface spots on some of the tools with the Rebar, but that has never caused any problems with usage. A little cleaning and oiling every now and then is a good thing. Even Swisstools become useless without cleaning (the tolerances are so tight that dust, lint, and dirt cause the tools to be difficult of almost impossible to open).
Maybe Singh doesn't keep his Rebar clean?
-
@Poncho65 said:
Some very great uses DT

I really do hate losing anything
I have misplaced a flashlight recently and it is bugging me to death :ahhh it has to be in the house but where I have no idea
This is been a great read so far though

Only one word to change here Ponco. For me it's not flashlight It's REBAR!!!!!


I hate not being able to properly participate in my own challenge. :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh
D_T and everyone else I can't say thanks enough for keeping it going.

-
-
@Singh said:
Why do people love the Rebar? Maybe some people love rusty tools?If stainless rusts, the owner is not taking care of the tools.
My rebar, ST3, Wave and Surge have all been used in the rain and just wiped down later that day and light oi applied, not any rust ever. So very confused by comment unless using in and near salt water. That stuff is cruel.
-
If my Rebar gets rusty I just soak it in WD-40 and clean with a brass bristle brush.
I think people love it because it runs cheaper than most MTs (50-60 usd) without cutting corners on QC, plus it has that classic look like the PST. Just think of it as a PST3. Plus Replaceable Cutters (which btw work better than a lot of regular wire cutters) 8) -
In the short time I had mine I have to admit to being impressed by how wide the pliars opened up. The only MT I have that opens wider is my Surge. The cutters didn't do well on small copper stranded wire but when it counted they did do a good job on cutting the fish hook from my finger although they suffered some damage in the process. I was able to file it down so the pliars opened smootly again. Of corse I would have replaced them in time and that is a nice option.
Never saw any sign of rust. -
@Douglas said:
..The cutters didn't do well on small copper stranded wire but when it counted they did do a good job on cutting the fish hook from my finger although they suffered some damage in the process. I was able to file it down so the pliars opened smootly again. Of corse I would have replaced them in time and that is a nice option...I think the Rebar's cutters are better for bigger stronger things you need to cut. Zip ties, hard wire, I cut some small fishing hooks up with it. The replaceable cutters on the Rebar are the only ones I've seen eat through a seal on a semi trailer in one bite. It's almost like having a full on pair sidecuts!
-
Day 9
Near the end of the first third of this - a little bit challenged - challenge, I present a shot of two Rebars for the price of one.

-
@Dutch_Tooler said:
Day 9Near the end of the first third of this - a little bit challenged - challenge, I present a shot of two Rebars for the price of one.
:ahhh the Chess Rebar team :D

-
Rebar Chess
you'd need 32 LMs - Micras as pawns etc. :DDay 10
After a recent, not too emboldening experience with the sheath that comes with the SOG Power Access Deluxe, it is now time to extol the largely unsung virtues of the sheath that came with the (BO part of the) Rebar VX, although I bought this one used, so no idea if it is stock.
The LM sheath features a velcro fastener worthy of the name, Molle attachment and an internal separate nylon pocket into which one can wriggle an entire bit set (nice for the bit driver I incorporated in the Rebar VX), while still leaving enough space for the Rebar. I still need to experiment with storing a bit driver extender though.
Less bulk could be achieved by storing the bit set in a separate pouch, of course, at the cost of space as measured along the belt ;)




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
