Powerlock 30-day challenge
-
Day 17:
Messed around with testing the awl and Phillips driver today.
Used the awl to drill a pilot hole for a standard wood screw:

Awl did a fairly good job with this task.
Next I tried driving the wood screw into the 2x4:

I drove the screw about 1/2 way in. At that point, the resistance led to the driver twisting, flexing, and popping out of the screw head. I then used a standard 1pt Phillips screw driver to drive the screw in a bit further, but it, too, started popping out. I'd say the Powerlock's Phillips worked well as compared to a standard driver, although I did notice significant flexing of the blade in the handle and the handle in the frame, all of which led to the driver tip disengaging from the screw. i.e. 'popping out'.
Lastly, I used the Powerlock to remove the screw from the 2x4. This was fairly tough, but the Powerlock did well and accomplished the job.

The driver tip did get chewed up a bit, but still looks entirely functional. I don't think it would be happy with repeated hard use like this, but it accomplished what I set out to test.
-
That didn’t work to well :ahhh :ahhh
It should be able to work
-
I've been known to use the 1/4" adaptor with a Phillips bit instead of the driver implemented on the PL, with better results

also, I put a LM Blast PH driver on my PL...
-
That looks to be a #2 phillips head wood screw. Please set me straight if I am delusional. The SOG phillips is best used for smaller, #1 phillips screws, but if you grind the driver tip down a bit and put a sharper edge on the four driver edges, it works quite a bit better on #2 screws.

-
G-man, I think you are right. It's probably a #2 Phillips woodscrew. I just grabbed it out of a box of screws, so I'm not absolutely sure, but a #2 Phillips fits it fairly well. I'll confess to not always being fussy about the Phillips driver I pick up to use on a Phillips head screw. And, if all you have is a multitool........
I do like the way the Vic Spirit's Phillips driver is formed to work with #1 and #2 Phillips screws, while not being perfect for either.
All in all, I was satisfied with the way the Powerlock's driver worked here.

-
The Vic #1#2 Phillips driver, found on most of their tools, are fantastic for all medium duty screwing tasks , from my observations.
My Vic explorer was probably involved in rewiring several thousand lamp\chandeliers\sconces at my last job. The SOG #1 Phillips is not a good shape for working on in-between screws or #2s. The driver tip does have enough meat on it to reshape it closer to the Vic shape. :) -
Day 18:
Hot and sunny today. Didn't do much and the Powerlock just rode around in the belt sheath. I'm ready for summer to be over......... :-\

-
Less hot will do for me :ahhh :ahhh
-
Me too :P 33ºC here

-
Seems it is hot all over the globe. We had such a mild winter in Alabama, that the insect problem is severe. Several new tick species coming from South America as well. Insane amounts of wasps and yellow jackets. Ravenous Mosquitoes. Ridiculous humidity. I can't wait for fall/winter. :ahhh
-
@gerleatherberman said:
Seems it is hot all over the globe. We had such a mild winter in Alabama, that the insect problem is severe. Several new tick species coming from South America as well. Insane amounts of wasps and yellow jackets. Ravenous Mosquitoes. Ridiculous humidity. I can't wait for fall/winter. :ahhhbig insects here too because of the mild/warm Winter, now we have plagues in the city!! :ahhh

-
:o

-
Blame it on the World Cup--another slow day for the Powerlock. But, as awlways, it was good to have a multi in the pocket.


-
Very nice, Nix!

-
Fishing tomorrow........

-
Day 20:
Went fishing on the lake with a buddy today. Packed some stainless tools along with the Powerlock:

It turned out that the Powerlock was all I needed.
Here's a shot from the lake:

The white dot in the picture is a pelican. Pelicans are awlways a good sign!

We found a small inlet and worked that area pretty well.

The mosquitoes were out again today, but this time I remembered my DEET spray. ....and the fish trembled.....

We actually did OK. We each landed two small Walleye. I had a big trout on the line, but he made a magnificent jump and threw the hook. Yeah, the big one got away.......


SOG Powerlock came in handy for crimping shot, crimping hook barbs, cutting line, and removing fish hooks from the fish (no fishermen were hooked during this outing.).
My buddy had forgotten his pliers ( but remembered his ancient, rusty, Imperial "Camper", a copy of the Spartan. A lame copy. He borrowed the Powerlock to pull his fish hooks. He thought they Powerlock was great.
A hot day, but a fun day. And always nice to land a few fish.

-
Awarded.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
