Need to understand "Rebar Love"
-
@Dutch_Tooler said:
Thanks! Well, it's not actually an issue in practice. Also, I can't show you without taking the thing apart, if even then (the pivot is just a little bit too short to accommodate all the tools and still fully extend into the holes in the handle in locking engagement with the latter - the engagement is only partial). It's in the handle opposite the large bit holder - see pic. I have thought of thinning the awl and/or the large screwdriver. Probably only the awl, by a tenth mm or so - that shouldn't impair its function.l had this issue as well and it was bugging me. l solved it by replacing the pivot with a longer one from a Fuse - it's about 1 mm longer and allowed me to use the anti clump washers between all the tools.
-
Thanks george1, that is a tip I might be following up

-
Thanks for the photos D_T it helps to see how the mod works and a great size comparison. george1 sounds like the perfect solution to D_T's issue.
-
Great pics DT the close ups are great
and yes like the 2nd sheath in the pic
I have been known to pocket a Supertool :o :D -
D_T you're going to have company again thanks to Gerleatherberman.

Another package arrived at my place today, ??? unfortunately delivered by the Postman not Chuck Norris (what a great guy).

I managed to snag my Mora back from Danni
and opened it up only to find a heavy bundle of ... 

After getting through all that I found myself face to face with a Rebar
and G-man's sense of humor.



and best of all

.Showed all this to Danni and she responed with now you'll have to get a chain for the chain.

Now that's a real

-
THANKS
GERLEATHERBERMAN -
Wow very cool Doug
Very nice of GLBM as well and a
to him 
-

Douglas,
I'd shake your hand, but my arm isn't long enough to reach Texas. Your friendship is very much appreciated.

I may have gotten carried away with the engraving tool.....and chain.

But, nobody will have to ask, "is it yours, Douglas?" :)Danni,
Your response was perfect! Thank you. Now to find Douglas a chain for his chain.
-
Douglas,
I'd shake your hand, but my arm isn't long enough to reach Texas. Your friendship is very much appreciated.

Back to you my friend.

@gerleatherberman said:
I may have gotten carried away with the engraving tool.....and chain.
But, nobody will have to ask, "is it yours, Douglas?" :)

@gerleatherberman said:
Danni,
Your response was perfect! Thank you. Now to find Douglas a chain for his chain.
WOW!


-

Now. One last thing. May I join you guys in the Rebar challenge?
I have the Breezy custom ReWave. It may not qualify as a "real" Rebar, but it could work for the modded tool challenge badge. :)



-
I'm good with it, has a lot of the same features as D_T's VX.
Between the two of you I think I will have to Mod one myself.
What say you, D_T? -
Of couse, nice you can join us GLBM
and thank you for helping Douglas out with his loss 

My VX is modded too but I have it on good authority ;) that I can participate nonetheless. I see no reason why you shouldn't be able to, particularly after you got this challenge back on track

(I also have the other one, which has made a few appearances and is stock as far as tool complement goes.)
Expectations are high though :D
-
Day 13
Rebar VX somewhere on today's commuter vehicle of choice. Compact size helps here as well...

-
Great to see that this challenge just got some help
Stuff like this is what makes me love
8) -
Excellent outcome to the challenge and your "Situation" Doug!!
GLBM my biggest
to you, and you made me laugh hard with that engraving
, you sure are a talented customiser :DIMO you can obviously join and do the Challenge
as long as it reads "Rebar" o the handle, and it's not written by you with an engraver 
-
Why do people love the Rebar? Maybe some people love rusty tools?
What's with the drive by cheap shot

I pine for the days when LM steel held up better. I have an old original Supertool old that's seen hard use; left out in the rain, stored in damp garages, rarely oiled..and not a speck or rust on it. If the rebar had that same quality, I would love it.
-
@Douglas said:
I'm good with it, has a lot of the same features as D_T's VX.
Between the two of you I think I will have to Mod one myself.
What say you, D_T?Awesome. Thank you, my friend!

@Dutch_Tooler said:
Of couse, nice you can join us GLBM
and thank you for helping Douglas out with his loss 

My VX is modded too but I have it on good authority ;) that I can participate nonetheless. I see no reason why you shouldn't be able to, particularly after you got this challenge back on track

(I also have the other one, which has made a few appearances and is stock as far as tool complement goes.)
Expectations are high though :D
Most excellent, D_T! Thank you!
I'm excited to try the Breezy custom Rebar (cough...ReWave....cough) out in the challenge with you guys! :)
@Poncho65 said:
Great to see that this challenge just got some help
Stuff like this is what makes me love
8)MT.o! MT.o!

This site and people have been one of the best things that I've encountered in my life..
A truly awesome group of folks. But, then again, I always knew people who carry and use MTs/SAKs/Both hard to be cooler than average.
@ThePeacent said:
Excellent outcome to the challenge and your "Situation" Doug!!
GLBM my biggest
to you, and you made me laugh hard with that engraving
, you sure are a talented customiser :DIMO you can obviously join and do the Challenge
as long as it reads "Rebar" o the handle, and it's not written by you with an engraver 
Thank you, my friend!


I was hoping you wouldn't catch the engraved "Rebar" on the handle of mine. :ahhh :D -
Day one:
Rebar hanging out on some 1890s oak carving I have been repairing.
-
@gerleatherberman said:
Day one:
Rebar hanging out on some 1890s oak carving I have been repairing.non-replaceable cutters!! :ahhh :ahhh
-
I'll be careful!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login