Repairing a Multi-Tasker?
-
Good job ! It's always exciting when piece start flying ;)
-
Nice one TP

-
Thanks for explaining the thumb screw, TP. I did laugh a little, until I read why.

Glad you got that interesting tool back into fighting shape.
-
thanks folks, it was really easy-

But, it looked really hideous and I knew the other tab would break sooner or later (rather the first one) so, since I needed some distraction to ignore food cravings this late evening I got to it again.
I took the two tabs and screws out (none went flying this time :D)
Before that, this was the modded tab and the unmodded tab's appearance:Spoiler:

Spoiler:

now I put both factory screws on each, and added four washers (one to each screw) to do the same function as the plastic tab, that is, retaining them over the rail so they don't fall out of the tool, or inside the rail

Here you can see the screw with an allen key put to it, the broken plastic tab, and the center button with the spring

Spoiler:

This is all that falls out once you unscrew the tab, except for the washers
Spoiler:

The assembly is: first you put the center button in the shears head, and put a metallic washer on top (this washer has to be underneath the handles, inside the rail
Spoiler:

then you close the handle until it touches the shears head (the piece that slides in and out), then you put the two screws on the shears head (there are three holes on each side of the sliding head)
This time the washers are inserted into the screws previous to putting them in the central piece, and these washers have to be on top o fthe handles, outside of the rail, to prevent the screws from falling inside

Spoiler:

Now it will open and close smoothly, lock in both positions, and slide without issues, and the screws won't fall inside thanks to the washers outside the handles, while the sprung button won't fall out thanks to the washer inside the handle

Spoiler:

excuse my poor wording but I find it hard to talk in a technical language in English :P Hopefully the pics did help and this info will be ere for anyone having issues in the future with their MPs or sliding multi tools ;)
Spoiler:

-
Great job TP !
-
That looks excellent, TP!

I have a Flik with a broken slide clip, but the two-stage engagement mechanism for the pliers makes using washers a bit tricky. After seeing how well your multitasker worked out, I may try to fix the Flik again.

-
Excellent job TP

-
Great fix Peacent

-
That plastic thing is real flimsy. I am going to do it on my ninja shears also.. Sometimes we just think too complicated fixes. When a couple of washers will fix it properly. Nice TP!

-
thanks peeps,
I hope this helps anybody having trouble with their flick tools
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login