Need to understand "Rebar Love"
-
Day 3
Rebar and Pioneer X again. The Rebar hasn't seen much use, but I used the knife blade on my SAK to cut open boxes and a few letters, and the scissors cut some thread.

-
MattGyver,
I think you are doing the wrong challenge.

Carry on!

-
Matt,
Did you get my PM? I challenged you to a pocket dump(thread link was included).
:DNo big deal. It is too late to accept the pocket dump challenge now, but maybe next time. If that is O.K.? :)
I know this Rebar challenge is a bit 'off the cuff', but I would have used the Rebar blade instead of the SAK blade(I hope that doesn't come off as preachy). Just because of the challenge(makes a good photo). Nothing wrong with the SAK blade, but that Rebar needs some photo-cardio.

-
Day 9
I'm not a great fan of SE blades but the Rebar's cut through this reinforced drain line beautifully and the Phillips made easy work of changing the fan on this juice dispensor.
I also had occasion to use the file to remove some burrs on a stainless steal filter assembly and it worked wonderfully.
The file is very agressive so it takes a lighter touch than with a Vic file, I kinda like it too.
Sorry no photo on that one.
G-Man the "break-in" on the tools is perfect and they deploy for use very smootly.
I often use the tools more than the pliars and need to swap between tools several times on the same job so having to open the pliars every time has been a real challenge for me. :ahhh :ahhh I am so accoustomed to out side tools on my Swisstools I occasionaly have to bite my tongue in front of customers.
Maybe it's just hard to teach an old Doug new tricks...



Oh and Matt I gotcha covered on that blade in use photo today.

-
Alright, alright. You got me!
I had the Rebar on my belt but both times out of instinct I reached for my pocket knife. Don't worry the Rebar is getting a workout tomorrow! And GLBM I just looked at the message but I didn't see a link
I'll go look again -
@_MattGyver_ said:
Alright, alright. You got me!
I had the Rebar on my belt but both times out of instinct I reached for my pocket knife. Don't worry the Rebar is getting a workout tomorrow! And GLBM I just looked at the message but I didn't see a link
I'll go look againIf I forgot the link, I apologize! :ahhh
We'll do a pocket dump challenge again, at some point.
I know what ya mean. I constantly reach for a knife or tool that I isn't part of a challenge. But, changing the pocket they reside in helps to reduce using the non-challenge tool. :)
-
Alright, alright. You got me!
I had the Rebar on my belt but both times out of instinct I reached for my pocket knife. Don't worry the Rebar is getting a workout tomorrow! And GLBM I just looked at the message but I didn't see a link
I'll go look againIf I forgot the link, I apologize! :ahhh
We'll do a pocket dump challenge again, at some point.
I know what ya mean. I constantly reach for a knife or tool that I isn't part of a challenge. But, changing the pocket they reside in helps to reduce using the non-challenge tool. :)
Right
As far as the pocket dump challenge, I'll be on my game next time. I got bombarded all at once with emails yesterday so that must be why I didn't see your PM until just now. Sorry about that. 
-
Cool beans, Matt!

There were some awesome pocket dumps in the thread though. Definitely worth a read/look!. :)
-
@gerleatherberman said:
Cool beans, Matt!
There were some awesome pocket dumps in the thread though. Definitely worth a read/look!. :)
will do

-
More great uses guys
Except for Matt
I would try and carry a smaller or different SAK than what you are use to then you might remember to use the Rebar more
:D -
Day 19
Ivy league Rebar :D

-
Day 4
Today's plan is to carry the Wenger to the car and leave it in the center console unless I desperately need scissors.
I'll behave....
-
Just saying... you *could *put scissors in the Rebar

-
@Dutch_Tooler said:
Just saying... you *could *put scissors in the Rebar

True, true..🤔 But I don't really have the work space to do a mod right now. Really need to put a workbench in the garage..
-
If you haven't gotten a set yet, check out "Loki-Mobile" for a set of parse wrenches. Once you break down a Leatherman, it ets easier te next time. :)
Day 9:
Stapler jam. Used the can opener to get the bent staple out. :)
-
Two-part post. 1/2
Decided to use the Rebar as my only tool for an insert removal, fill-in with dowel, and cutting/filing the dowel. Only other tool used was a power drill for the hole.
The Rebar is definitely more capable than I had originally given it credit for. The saw and file are really good. :)


-
Two-part post. 2/2.



-
@gerleatherberman said:
Two-part post. 2/2.

Good use of the under estimated Rebar.
Now, will you drill a new hole for mounting a caster or will the leg no longer roll, indicating this process was repeated multiple times?

-
Good work there G-Man.

We just had some light wiring duty today.

-
Two-part post. 2/2.

Good use of the under estimated Rebar.
Now, will you drill a new hole for mounting a caster or will the leg no longer roll, indicating this process was repeated multiple times?

Thank you, LoopCutter!

I will take a photo tomorrow. But, I drilled fresh 3/8" holes(slightly offset from the dowels) and put in new insert sockets. I wire wheeled the original wheels metal frames and oiled the bearing swivels/axels. Rolls like a Rolls Royce now. :)
I am not 100% sure, but I believe those are the original wheels. The wheels are extremely well made, but the socket holes were wallowed out and the inserts damaged. My guess is that something very heavy(CRT TV maybe?) was sitting on the table and rolled around often. The joints were coming apart as well. I'll have to post a photo, because it is one of those mid-century double-leaf tables with storage for four matching folding-chairs inside. It did have spider webs, roach pills, car fur, and decades of cigarette smoke all over it, so the cleanup has been/should still be fun. ::)@Douglas said:
Good work there G-Man.
We just had some light wiring duty today.Thank you, Douglas!

Nice macro shot there! That plier head is the only thing I wish my ReWave still had. The new-style jaws just feel more robust. :)
I like the Wave pliers, but they will twist a lot easier than the Rebar pliers. :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login