Amefa Corner!
-
@Lynn LeFey said:
I guess I get to join the club now.I just won this off of ebay. Broken tip on the blade, but otherwise seems in pretty good shape, and modding blade tips turns out to be pretty easy.
This isn't my pic. It's from the ebay listing. I don't have this in-hand yet, but looking forward to comparing this to the Pioneer, and Marbles copy of the U.S. Mil-K knife.
Great find! But doesn't the tip stick out of the DAK when you reprofile the edge?
-
@Lynn LeFey said:
I guess I get to join the club now.
I just won this off of ebay. Broken tip on the blade, but otherwise seems in pretty good shape, and modding blade tips turns out to be pretty easy.
This isn't my pic. It's from the ebay listing. I don't have this in-hand yet, but looking forward to comparing this to the Pioneer, and Marbles copy of the U.S. Mil-K knife.
Great find! But doesn't the tip stick out of the DAK when you reprofile the edge?
not if you drop the point enough, ala sheepsfoot or wharncliffe,
at least that's what I did to 2 SAKs similar to that one 
-
@ThePeacent said:
not if you drop the point enough, ala sheepsfoot or wharncliffe,
at least that's what I did to 2 SAKs similar to that one 
Ah right! Didn't think of that

-
I think it’s time to derail this thread...
What do you get when you spell Amefa backwards?
-
Wagon...off the rails

-
@ThePeacent said:
not if you drop the point enough, ala sheepsfoot or wharncliffe,
at least that's what I did to 2 SAKs similar to that one 
I got the knife in the mail today and...
Here's before/after photos of what I did.
I decided to retain as much of the factory edge as I could, so I made it a clip point. I guess it's kind of literally a clip point, since I 'clipped' the blade off. Dremel, not clippers, but same idea. The tip is VERY well recessed into the tool, with no fear of accidental stabbery... at least when closed. :D
I am VERY impressed with this tool. It feels solid as a rock, the layers are made of thicker stock than my modern Vic Poineer and Farmer. It was pretty grungy when I got it, but I gave it a scrub, and got most of the gunk out. There's a bit of rust-pitting on the can opener, and a tiny spot on the flathead. The very tip of the awl's sharp edge is messed up, but these are all very minor issues. I paid $20 for it and feel it was well worth it, considering what these things were going for at the gun and knife show i went to in December.
The 'walk and talk' of the tool is incredible. The thicker layers means thicker back springs. Retention is stronger than the Vic 93mm knives I have but not the absolute ridiculous nail breaking strength of the Mil-K U.S. knife.
I wouldn't put this in the same class as Victorinox, but at least in the same league. The lower polish on the tools kind of made me feel like this is what would happen if Leatherman made a Soldier knife. Very very good, just not the same level of fit and finish as Vic.
-
That clip point looks very good. :D

-
@Lynn LeFey said:
...I decided to retain as much of the factory edge as I could, so I made it a clip point......I am VERY impressed with this tool. It feels solid as a rock...
The 'walk and talk' of the tool is incredible. The thicker layers means thicker back springs......I wouldn't put this in the same class as Victorinox, but at least in the same league...
I was equally impressed. Or more surprised maybe. I spoke a guy at a military dump shop about them when I was looking for my '84 DAK and he said they were rubbish and not worth my time and effort.
But given a good clean and oil treatment these things are a charm. The snap on those springs is very convincing.I wonder how they would look when they have a better finish. And let's make that a test!
I'm going to get another Amefa DAK, disassemble it, finish it like Victorinox intended and put it back together. Imagine these things with a shine! -
Here's Rons '81 DAK, which happens to be a BY DAK for El Corkscrew and will be winging its merry way across the pond at some point in the near future.



-
Read this thread with a bit of interest. Until recently I had no idea that an Amefa knife was a military issue item. I have had one in my SAK drawer for many years and had no idea what country it was from. Someone posted a picture of one on another site(AAPK I think)and that is how I found out about them.
Here is a picture of the one I own.


-
Nice one Ray
Have you tested that funky can opener? -
@magentus said:
Nice one Ray
Have you tested that funky can opener?Thank you sir! No I haven't tested this particular one but I have used them before. I found the easiest way to use them is to place the blade at 90 degrees to the handle had hit the handle with your hand to pierce the can and then open it all the way and use it as normal.That way it doesn't fold back on your hand when you try to puncture the can with the blade fully opened.
-
Very nice one, Ray!

Appears to be in good condition.
-

I really started to love Amefa. It's been a bit of a rollercoaster though. I hated them at start. Used to see them at fleamarkets all beaten up. Must be poor quality right?Then i wanted a Victorinox birthday say and what fo you know, Ministry of Defene decided upon Amefa that very last year!
But when I got is and gave it some oil and pkayed with it, wow, what amazing knives!

Sadly, the '75 had to go. I needed money for a bag. :'(
-
My first government issue Amefa came in 1978 when I joined the military. I can't remember the exact KL-year, but it was probably 76 or 77.
It was surely not a bad knife, in fact it was a good knife and did what it had to do, that is slicing bread or meat, opening tin cans and bottles, (un)tightening screws and punching holes. We used the tools mainly for cleaning weaponry. Many soldiers -especially draftees- used the knives to break up monotony, which many time resulted in a broken tool...Young men who were involuntary put on a uniform in order to get ready for an atomic war that would never happen, didn't take to much care for their equipment. Giving them the best pocket knife available is something like "casting your pearls before swine". So the Amefa did a good job, as did the Victorinox later on.
-
@Mactire404 said:
Sadly, the '75 had to go. I needed money for a bag. :'(

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



