Need to understand "Rebar Love"
-
Awesome pics in this thread guys 8) Love all the uses as well

-
What Poncho said... +1
Btw, anybody keeping tabs on daily pic submissions?
-
@jaya_man said:
What Poncho said... +1Btw, anybody keeping tabs on daily pic submissions?
As I count the posts
D_T a straight forward 22 8 to goDouglas Straight forward 12 18 to go
MattGyver
Daily Pics Straight forward 6 24 to go
Inc. all Pics from start 9 21 to goGerleatherberman
Straight forward 10 20 to go
Including request to join Pic 11 19 to goI say let Matt have credit for the Challenge badge learning curve (we can all be a little CHALLENGED some times) and G-Man for the request to enter pic.
What say ye Mods??? -
@Dutch_Tooler said:
I've never been able to use the can opener as cap lifter, the design is just wrong for that as the curly bit doesn't manage to hook under the cap...I hereby solemnly withdraw this statement. The last brew I opened was in fact a successful deployment of the can opener as a bottle opener. Alas, documentary evidence in pictorial format does not exist, as I was too surprised it worked. The curly bit of the can opener can (pun intended) be inserted under a protruding portion of a cap edge, although this has to be done with some care as one needs to hit the exact spot; but then things go smoothly

-
DAY 13
Did a little wood work with the Rebar and a couple of old Hand me Down reliables, then gave the Rebar file a work out on the ax head. The crosscut side of the file is very agressive and works realy well, while the single cut side...Well it's just not cut for that. The wood saw on the other had is a real "cut above" all but Vic wood saws and I would say the are both true "Cut Ups" that just can't be beat. The saw, file and knife blades do suffer in my opinion from the blade facing the center of the tool when properly closed, this tendes to shorten the effetive work area of the chosen tool. Outside opening is a real plus for these tools in particular on the Wave, Surge, Swisstool etc...
-
I've never been able to use the can opener as cap lifter, the design is just wrong for that as the curly bit doesn't manage to hook under the cap...
I hereby solemnly withdraw this statement. The last brew I opened was in fact a successful deployment of the can opener as a bottle opener. Alas, documentary evidence in pictorial format does not exist, as I was too surprised it worked. The curly bit of the can opener can (pun intended) be inserted under a protruding portion of a cap edge, although this has to be done with some care as one needs to hit the exact spot; but then things go smoothly



-
@Douglas said:
The saw, file and knife blades do suffer in my openion from the blade facing the center of the tool when properly closed, this tendes to shorten the effetive work area of the chosen tool. Outside opening is a real plus for these tools in particular on the Wave, Surge, Swisstool etc...Awl true, Douglas. But the handles can be opened to allow better access and simulate outside opening tools.
-
The saw, file and knife blades do suffer in my openion from the blade facing the center of the tool when properly closed, this tendes to shorten the effetive work area of the chosen tool. Outside opening is a real plus for these tools in particular on the Wave, Surge, Swisstool etc...
Awl true, Douglas. But the handles can be opened to allow better access and simulate outside opening tools.
This ^

-
The saw, file and knife blades do suffer in my opinion from the blade facing the center of the tool when properly closed, this tendes to shorten the effetive work area of the chosen tool. Outside opening is a real plus for these tools in particular on the Wave, Surge, Swisstool etc...
Awl true, Douglas. But the handles can be opened to allow better access and simulate outside opening tools.
This ^

Okay Guys I did recognise the tools can be used in that fassion,
but one would have better and safer control over the open blade with the butterfly handles closed as they are intended. 
Not to say that I have never used the screwdrivers that way because I have,
heck I've even been cought using the1/2 open position like a "T" handle for a little extra torque.I didn't think that out loud, did I?
-
Nice D_T and Douglas!
Hehe. Properly closed. :D
I don't think I've used an inboard tool like that since I first started using butterfly tools. I had been using my pinchy so long, that I was amazed by NOT having to close the handles on inboard-tool MTs.
Shoot. I even use the SwissTools with one handle opened back. I like having the handle of the tool I am using not being twice as thick as it needs to be. :)
In fact, trying to fiddle with using the blades with a handle end in the way would seem a bit more dangerous. It really isn't an issue with the LMs for me. Gerber and SOG would seem more dangerous with not putting the handles back into starting position. :)And when the handle is folded back on the Rebar, the light weight makes it a pleasure to use that way. It isn't so fun on the supertool 300. :ahhh
-
Day 7
A photo of the Rebar hanging out with some friends.
PS thanks everyone for the kind words I have been battling a sinus infection, but I'm feeling better now.

-
Day 11:
I sprung the clip on my precious Stanley Chrome 12' measuring tape. Used driver to remove it and used the pliers to squeeze the clip back into shape. Good as new. :)Also, thank you for taking a day count, Douglas!


-

Day 23
Feeling artsy today. The theme is Rebar Chess.





-
I've never been able to use the can opener as cap lifter, the design is just wrong for that as the curly bit doesn't manage to hook under the cap...
I hereby solemnly withdraw this statement. The last brew I opened was in fact a successful deployment of the can opener as a bottle opener. Alas, documentary evidence in pictorial format does not exist, as I was too surprised it worked. The curly bit of the can opener can (pun intended) be inserted under a protruding portion of a cap edge, although this has to be done with some care as one needs to hit the exact spot; but then things go smoothly



Come to think of it, this means triple redundancy...

-
Monday's Rebar centered EDC.
Rebar, Marjacq peasant knife, LED Solitaire, Seiko 5 21j watch, and Spacepen.
-
Day 23
Feeling artsy today. The theme is Rebar Chess.

You could also go for
Light Side vs Dark Side














Jedi Master vs Sith Lord -
DAY 14
The PE blade made quickworkplay of this box.

-
Looks so sharp that, for a moment, I thought I might get a paper-cut!

-
Careful, Douglas and Nix. The Rebar blade will leave more than a paper cut. :ahhh
I could open the cut and see through the cortical bone layer, of the right-index proximal phalange, where the edge cut into it(not too bad though). :ahhh
Don't even ask. It is too embarrassing.
The BO blade does look cool where I wiped it off.

Oh. Day 11. :)


-
@gerleatherberman said:
Careful, Douglas and Nix. The Rebar blade will leave more than a paper cut. :ahhh...
Don't even ask. It is too embarrassing.
:o ??? :o
PROPERLY CLOSED??

Couldn't help myself...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login