Need to understand "Rebar Love"
-
Ouch!
-
Be careful GLBM :ahhh The Rebar PE blade looks like a scapel to me and apparently for good reason :ahhh Hope you heal quickly

Thank you, Poncho !

yeah I got cut by the Rebars PE blade before. Ouch, they put a good factory edge on them that's all I can say
-
They really do, Matt!
Every Leatherman I own, that wasn't previously used, came wicked sharp. That is always appreciated from an MT company. :)
-
In a different thread, Zoidberg opined that the Rebar's PE blade seems a bit flimsy and prone to being bent (and not just by a brute like myself, I think).
Since you guys are in the midst of a Rebar challenge, any thoughts about the Rebar's blade, aside from it's willingness to bite?
-
I don't think, considering the size/light weight of the Rebar, the blade is "flimsy".
Newer LM blades don't bend. They snap.
I haven't read anything that indicates the Rebar blade is a problem.

The Rebar blade is the same thickness of the blade on the PL you were using.
-
Nothing for the Rebar today. Took an extra day off today. :D
This was my pocket gear today. :)

-
DAY 15
Spent the day working in the office so no real action picks today.
Just a little On the fence about hang'n out...





-
Very nice, Douglas!

-
@Nix said:
In a different thread, Zoidberg opined that the Rebar's PE blade seems a bit flimsy and prone to being bent (and not just by a brute like myself, I think).Since you guys are in the midst of a Rebar challenge, any thoughts about the Rebar's blade, aside from it's willingness to bite?
I've not had any issues with the blade itself, just with getting it out and putting it away.
The blade has a great shape and matching quality edge. It seems to hold the edge well and when a touch up is needed it's easiy done.
To me the blade itself is one of the Rebar's best features. -
Day 9
Combo edge? Straight edge? Serrated? Lucky I don't have to choose :D
-
Nice pics Douglas!

I've nominated one for the July calendar.
Day 25
Rebars standing guard over my cappuccino. Heavens forbid anything should happen to it, that'd ruin my day ;)

-
I wouldn't really call the blade on the Rebar flimsy at all :ahhh
The Reactor's blade is flimsy, the Squirt's blade is flimsy, the Gerber Crucial blade is flimsy, as is the one in other tools and brands, but not this one.
To me flimsy (in a blade) means that either:**a. **It is long and can be easily bent, broken, or snapped off because of its length, thickness and/or flexibility
b. It is small sized, almost minuscule, and barely cuts in depth and width, such as the Micra, Classic, Style or Dime blade (but this second definition is more "puny" or "tiny" than "flimsy" I would say)
-
I tend to agree with all those that do not call the Rebar blades "flimsy". Very sharp on the factory grind and sturdy for their size, which couldn't be any larger without compromising the size of the package they come in (i.e. the handles). OK, so maybe it isn't a machete, but one can hardly expect that in a 4" multitool.
-
So I'm going to sneak a Rebar shot in here.

I can see why there may be questions about the knife blade. The hollow grind makes the edge seem thin and there is an obvious stress riser with the straight plunge line at the ricasso. But I think it has a decently thick spine and has proved to be sturdy enough for routine uses.
I have to say, the lock up on mine is really good and tight. After having completed a Powerlock challenge, this feels like a whole step up in quality.
I love this multi.

-
Nice photo, Nix!

It is just like people to break the pliers on MTs. You get carried away and forget, "hey, this is an MT, not 14" channel locks".
I try to modulate my MT usage when I can. I've only broken one MT blade (Gerber MP-1 PE) and bent (not broken) three MT plier heads. I was able to repair the bent plier heads to an extent. :ahhh -
probably the hardest blade to break or bend in a MT that I've seen is that of the MP700,
that is a THICK and STUBBY little pointy thing! :ahhhOFC, it can't cut a darn thing

-
I'm running late so I have to make this reply quick.
@Nix said:
In a different thread, Zoidberg opined that the Rebar's PE blade seems a bit flimsy and prone to being bent (and not just by a brute like myself, I think).Since you guys are in the midst of a Rebar challenge, any thoughts about the Rebar's blade, aside from it's willingness to bite?
I never used the word flimsy, I said they (both blades, not just the PE) were thin and easily bent.
And the context was someone wanting a multitool to trash.@gerleatherberman said:
I don't think, considering the size/light weight of the Rebar, the blade is "flimsy".
Newer LM blades don't bend. They snap.
I haven't read anything that indicates the Rebar blade is a problem.

The Rebar blade is the same thickness of the blade on the PL you were using.
I've found that the Rebar blades do bend some.
I've only had them snap after they've been straightened a few times. -
I can't even get the newer LM blades to bend at all. And I've tried to reduce rubbing by bending them. :ahhh
The old LM blades bend quite nicely. :)
-
Thanks for chiming in, Z!

(Didn't mean to throw you under the bus...twice....
But I thought you brought up a great point, one worth canvassing the experts about.
)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login