Need to understand "Rebar Love"
-
I wouldn't really call the blade on the Rebar flimsy at all :ahhh
The Reactor's blade is flimsy, the Squirt's blade is flimsy, the Gerber Crucial blade is flimsy, as is the one in other tools and brands, but not this one.
To me flimsy (in a blade) means that either:**a. **It is long and can be easily bent, broken, or snapped off because of its length, thickness and/or flexibility
b. It is small sized, almost minuscule, and barely cuts in depth and width, such as the Micra, Classic, Style or Dime blade (but this second definition is more "puny" or "tiny" than "flimsy" I would say)
-
I tend to agree with all those that do not call the Rebar blades "flimsy". Very sharp on the factory grind and sturdy for their size, which couldn't be any larger without compromising the size of the package they come in (i.e. the handles). OK, so maybe it isn't a machete, but one can hardly expect that in a 4" multitool.
-
So I'm going to sneak a Rebar shot in here.

I can see why there may be questions about the knife blade. The hollow grind makes the edge seem thin and there is an obvious stress riser with the straight plunge line at the ricasso. But I think it has a decently thick spine and has proved to be sturdy enough for routine uses.
I have to say, the lock up on mine is really good and tight. After having completed a Powerlock challenge, this feels like a whole step up in quality.
I love this multi.

-
Nice photo, Nix!

It is just like people to break the pliers on MTs. You get carried away and forget, "hey, this is an MT, not 14" channel locks".
I try to modulate my MT usage when I can. I've only broken one MT blade (Gerber MP-1 PE) and bent (not broken) three MT plier heads. I was able to repair the bent plier heads to an extent. :ahhh -
probably the hardest blade to break or bend in a MT that I've seen is that of the MP700,
that is a THICK and STUBBY little pointy thing! :ahhhOFC, it can't cut a darn thing

-
I'm running late so I have to make this reply quick.
@Nix said:
In a different thread, Zoidberg opined that the Rebar's PE blade seems a bit flimsy and prone to being bent (and not just by a brute like myself, I think).Since you guys are in the midst of a Rebar challenge, any thoughts about the Rebar's blade, aside from it's willingness to bite?
I never used the word flimsy, I said they (both blades, not just the PE) were thin and easily bent.
And the context was someone wanting a multitool to trash.@gerleatherberman said:
I don't think, considering the size/light weight of the Rebar, the blade is "flimsy".
Newer LM blades don't bend. They snap.
I haven't read anything that indicates the Rebar blade is a problem.

The Rebar blade is the same thickness of the blade on the PL you were using.
I've found that the Rebar blades do bend some.
I've only had them snap after they've been straightened a few times. -
I can't even get the newer LM blades to bend at all. And I've tried to reduce rubbing by bending them. :ahhh
The old LM blades bend quite nicely. :)
-
Thanks for chiming in, Z!

(Didn't mean to throw you under the bus...twice....
But I thought you brought up a great point, one worth canvassing the experts about.
) -
DAY 16
Needed some quick hooks.


The Rebar performed very well.

Just making the few hooks I needed wasn't a problem.
I just would not want to cut or bend a lot of hard wire with it because of the "hot spots". :ahhh :ahhh -
Day 13:
Removed the screws on an MT drawer and added some glue to the joint. Then put the screws back in.
-
Very MT related use ;)

I expect little actual use today so I'll start Day 26 with a combo shot featuring, as guest star, the Victorinox/D_T Cobalt Constructor. Disclaimer: if any MT is to find use today the challenge obliges me to try out the Rebar first, of course.

-
Day 10 :D
Doing some whittlin' with the ol' Rebar
-
Nice pics, D_T and Matt!

Day 14: today's carry.

-
@_MattGyver_ said:
Day 10 :D
Doing some whittlin' with the ol' RebarNoticed it's propperly closed..


Looks Good Matt.
Don't you think so too G-Man?

-
My Rebar was on package duty again today. This time with the SE blade.


-
:o
Nice!

-
Day 10 :D
Doing some whittlin' with the ol' RebarDon't you think so too G-Man?

Nah. Handle folded back is the way.
:DSeriously, for most cutting tasks I will be using the Rebar with handles closed (as directed) and only use it with the second handle folded back when I need to cut on a flat surface(which should reduce danger by having a surface to cut on). I am not just jousting MTs blades about anymore. I usually learn a lesson the first time around.

Nice photo, by the way, Douglas. And that Boy Scout Alox is awesome. I didn't even know they ever made a Scout Alox. I have a 2003 Boy Scouts Huntsman, but ALOX is a different echelon of quality. :)
-

G-Man I just couldn't help myself Matt's photo was just to GOOD.
So seriously how's the cut healing up? Hope as fast as my fish hook did. I was really surprised how quickly that healed up, not even a scar.
-
@Douglas said:

G-Man I just couldn't help myself Matt's photo was just to GOOD.
So seriously how's the cut healing up? Hope as fast as my fish hook did. I was really surprised how quickly that healed up, not even a scar.

Thank you, Douglas!

The skin is healing well, but I'm still having trouble with extending the finger out, because of the bone gouge. That will be fine though. :)So, with your injury, you really got off the hook? :D
Seriously, it is good you didn't pluck a tendon, or something. I'm relieved it has healed properly!
-
Good to hear you guys are healing up well - fish hooks and Rebars bite! So far my Rebars haven't had a go at me, but I know I only have to give them the chance :D. Mostly they're pretty cuddly though.
Day 27
Spot the difference...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login