Sheffield 12020
-
Thank you for the info, Charles!

I feel pretty good about my purchase of one now.
Gergozedobe,
Your enabling is legendary :D
Thank you for posting about your 12020!
-
Slipjoint pliers is not something you see everyday in a MT so that makes it a great feature to me

-
Thanks, Poncho!

The Sheffield will be my second slip-joint MT. They are really neat. :)
If you'll read some of Charles' experience with them, you'll see they are somewhat useful, but not as much as one would assume. :-\
-
My copy is bent as well. The handles are not nearly as robust as the Schrade ST5E. One of my handles has gone trapezoidal, and the other is twisted and out of plane. Seller refunded purchase price but not his exorbitant shipping cost :/ Ah well. All the tools still work and the pliers work too, it's just been used hard in the past. It's also not particularly comfortable to put pressure on... but man, when I compare the tools inside this thing to the tools inside a cheap multitool, there's no contest. The tools in this thing are extremely well-made.
Charles.
-
The one I ordered say "lightly used"
We'll see. I bought a "near mint" LM Pulse once. Took 6hrs to get it "acceptable". I had to peen the pliers, file thr teeth into shape, shift the cutters and sharpen them
Beat the barrel pins out and wire wheeled rust off of everything.
-
I've had the same or similar experiences time and again. With the plier tools, I've bought one in particular that I really wanted, and when it arrived it looked like it had been run over. ALL of the rivets popped, side plates and bent, big gaps between the liners, etc. Then again, I've also bought tools sold as "used condition with scratches and marks" and got the item and it was damn near perfect. My Marlboro-branded Victorinox Troubleshooter was like that. It had one chip out of the scale, but was otherwise immaculate and looked like it had never been used. Not a mark on the blades, not a one on the liners. I put blue Plus scales on it and have been using it nearly every day since. Likewise, I bought a factory second Utica/Kutmaster lockback. Brass ends and wood handle, big clip point blade. Basically a hunting knife, It had some discoloration on the brass. That was it. IT'S BRASS. It's supposed to tarnish!
Charles.
-
Very true. I'll try and remember that sometimes the item is way better than described. The Grappler I bought was sold as used with box, but the tool still had factory oil on it. :)
-
Thank you for posting this one, Charles! Found one on ebay for $19.99 shipped. Should be at my house next week.
I know these slip plier tools aren't all that effective(as you have described), but they sure look awesome, from a collector's standpoint. :)
Good to see my enabling skills are still working
( I mentioned the 12020 recently so I'm taking credit for these two purchases) ;)
:D
-
Vise, hammer, bending, and general ducking around and I’ve got my 12020 back in more or less okay condition. It closes correctly and isn’t noticeably tweaked. But I’d have to disassemble it to fix the lock and slight trapezoidal shape to one of the handles. And I don’t think the those are bolts. I think they’re pins or rivets. Can’t turn them with any pliers, and can’t really get much purchase on them with anything.
Good enough for now, but the lock doesn’t work on one side now. Ah well. It only cost me shipping.
Charles.
-
Charles,
When mine arrives, I'll see if my Leatherman wrenches work on it, and report back!
I'll try some heat on the pivits too, in case there is some really hard dried loctite in there.
-
I was curious whether the Phillips could fit a Ganzo bit kit adapter.
Will you use it once everything is fixed? -
It really can’t do what I was hoping it would do. So I’m not sure. The hard wire cutter is excellent, it’s probably worth keeping around for that reason if no other. But I haven’t decided yet.
As for the bit driver adapter, I have one and I just tested it. It will not work. The driver is too large for the adapter to fit over.
Charles.
-
Maybe a shelf queen then. It's certainly interesting. And probably rare? I haven't seen it posted before.
-
RP,
They're out there, but you just have to keep checking ebay. I kept checking and found one for $20 shipped. :ahhh -
I have to confirm several things Charles noted and add a couple of things I noted. These observations, will unfortunately, make it clear that the problems Charles is having are probably NOT, because of the handle damage.
Oh boy. First, the good things. :)
The tool is built like a tank.
The plier head is really well made.
The tools are all sharp and above par(par being high quality 'older' Chinese tools) in quality.
Handles have a very cool finish and look good.
Tools do all lock.(read further)Now, for the bad stuff.

Pliers don't snap/lock into place, so they flail around when trying to open the handles during usage.
The side with the phillips has no tool with a lock-bump high enough to unlock the phillips driver. I had to use a flat head driver to lift the lock a little to put it back in the handle. -I will try to remedy this.
The tools are almost impossible to pull out with my fingernails. I will try to remedy this.
Tool is obscenely thick and bulky. This is almost excusable, because of the amount of functionality, though.My example is unused and in perfect condition. The issues I have outlined (and some Charles noted) are definitely quality-control problems.

Weight and dimensions.
Weight:
10.44oz(0.653lb).Dimensions:
7.4"(188mm) long open.
5.0"(126.8mm) long closed.
0.80"(20.3mm) thick closed.
1.43"(36.3mm) wide closed.



-
So I’ve been keeping this tool in my Jeep, and had call to use it today. I must reiterate the quality of the individual tools is top notch, as is the pliers themselves. I needed the slip joint today, the MP600 I was carrying couldn’t manage it. I also used the large flat driver as a pry bar and I used the hard wire cutters over and over and over again to cut fencing wire, and it was easy and comfortable from the first cut to the last.
So while it will never be an EDC, it’s big and beefy and really nice to use for heavy duty tasks that other multitools can’t manage.
Charles.



-
Very nice!

From what i can tell, your are correct, the quality of the tools and plier head is top notch. The handles are the only issue I see QC problems with. :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login