Hvac/electrician multi
-
Iretired from that business after more than 40 years. I carried the Victorinox Champ almost all that time.and never wanted better. It is great at that job. But it doesn't do hex bits. So add in a 1/4 drive ratchet.
-
A Gerber Centre Drive possibly?
And a wire stripper?
I strip all my wires (from electronical wires too power lines) with my piers... never hit copper. -
@Mechanickal said:
A Gerber Centre Drive possibly?And a wire stripper?
I strip all my wires (from electronical wires too power lines) with my piers... never hit copper.Gerber Centerdrive.
My handyman brother uses his eight hours everyday and he swear by it. -
I am a propane service tech. 13 years. I currently am hauling around a Surge. with a homemade bit extender, and at least 1/4, 5/16" Nut Drivers, 3/16" Allen/Hex for gas test ports . The can opener/wire stripper is more than adequate on thermostat wires, and solid 12-14 gauge wire coatings (the scissors are my go to for taking the outer coating off of romex) , not so nice on the heavily insulated wires like on your replacement spark igniters. I believe i have used the small screwdriver (1/8" just measured) on at least a Robertshaw terminal screws and it fit not positive though. (If not, i find it a little redundant with all the flat heads on the tool anyway and if I installed a lot more thermostats I wouldn't hesitate to take a grinder to thin it out a bit more to fit in the terminal head if i needed to,). Dont forget the Coast G15 light to stuff in the sheath too..
-
For large specialty tools there is the Gerber Groundbreaker or the Cable Dawg.
-
I worked as an assistant for an electrician, and ended up doing lots of long wire runs in new construction. The IDEA of the compound leverage in the SOG multitools, particularly the Powerlock, was awesome. In practice, it kind of sucked. The pliers themselves cut fine. The ergonomics of the handles after a lot of use start to be noticeably bad. I ended up getting a pair of Crescent linesman pliers with compound leverage, and great rubber handles. VERY comfortable for long days with lots of wire cutting. I'm sorry that doesn't cut down your tool load, but just trying to be honest.
-
I'm the son of an electrical engineer, and 6 weeks away from being an engineer myself. I have been stripping wires for 30 years.
The SOG wire strippers are bad. Fiddly to deploy and flimsy as smurf. Great for casual tinkering a couple of times a year, but not for serious work. Steer clear.I recommend knipex installation pliers. They do not fold, but they are a legit multitool for serious work.
http://www.knipex.com/index.php?id=1216&L=1&page=art_detail&parentID=1363&groupID=2036&artID=35180
I love mine: Needlenose, ferrule crimper, stripper, cable shears and hole deburrer. Built like a tank.
The leatherman squirt frame cable strippers are great for their size. I love the squirt E4. https://www.leatherman.com/squirt-e4-92.html
And nothing beats the Topeak bit ratchet for 1/4" bit driving in the super compact weight class https://www.topeak.com/us/en/products/tools/771-ratchet-rocket-lite-dx
-Tom
-
Since posting this thread I installed a furnace in an irrigation supply house and came across king innovations lighting tool. I had to buy it. I've also fallen in love with Knipex tools and I agree that their wiring tool is incredible, will have to get it sometime soon as well.
The king innovation tool has incredible functionality, including a brush that I use to clean gas orifices. I filed down the long Allen key to be a terminal strip driver. While it isn't made as sturdily as a leatherman, it is great to have on my belt in an attic, crawlspace or rooftop.

Sent from my SM-G903W using Tapatalk
-
That tool looks amazing! Thanks for sharing! :o

-
Well hello,
One piece of advice, a crunch doesn’t work to well with hvac!
JR -
I have yet to see really functional strippers on a multi . You need to adjust your expectations a tad bit . If it was me , I would go with a Leatherman Wave+ , or a vic Spirit . The knife blade on these two are functional . As are the scissors . A leatherman , with the bit kit / bit extender is handy for walk in / diagnostic stuff . They are great , when you are momentarily seperated from your tool pouch , and you need to cut , grab . thurn a small nut . They are very handy for situations , where you need a second pair of pliers . They are not Linemans , or 9” heavyduty Klein needlenose pliers . Are they usefull , yes , but like general practictioners , they aren’t really too good , for specialized tasks .
I second the Knipex reccomendation . I use mine a lot , and have consolidated the work of three pliers . 90% of the time , i just carry a pair of the pliers for electrical installation , an small but mighty pair of dikes , a terminal driver , a 1/4” hex magnetic stubby driver , and a Multi tipped 1/4” hex mid sized driver .
For you , a Klein 11 in 1 driver , a Klein 6 in 1 stubby , plus one of the schreader valve bits that work of that system , would be very handy .
A multi is usefull for exerything from opening a cold one / food prep , to cutting stuff , to standing in when you are away from your pouch/ box .
Best regards ,
Chris


-
@Intercept said:
Since posting this thread I installed a furnace in an irrigation supply house and came across king innovations lighting tool. I had to buy it. I've also fallen in love with Knipex tools and I agree that their wiring tool is incredible, will have to get it sometime soon as well.The king innovation tool has incredible functionality, including a brush that I use to clean gas orifices. I filed down the long Allen key to be a terminal strip driver. While it isn't made as sturdily as a leatherman, it is great to have on my belt in an attic, crawlspace or rooftop.

Sent from my SM-G903W using Tapatalk
Interesting specialized tool. Any idea why the saw has a short row of teeth on the top of the blade?
-
Since posting this thread I installed a furnace in an irrigation supply house and came across king innovations lighting tool. I had to buy it. I've also fallen in love with Knipex tools and I agree that their wiring tool is incredible, will have to get it sometime soon as well.
The king innovation tool has incredible functionality, including a brush that I use to clean gas orifices. I filed down the long Allen key to be a terminal strip driver. While it isn't made as sturdily as a leatherman, it is great to have on my belt in an attic, crawlspace or rooftop.

Sent from my SM-G903W using Tapatalk
Interesting specialized tool. Any idea why the saw has a short row of teeth on the top of the blade?
Some drywall saws have teeth on both edges of the saw.
-
Actually Klein has come up with a multi for Sparkies , one dude who tested one told me the pliers are forged , they are hybrid pliers ( cross between Linesmans , and Strippers . Klein may not be up to much , these days , but their strippers are typically quite good. The tool has a #2Philips , a flat , a drop point blade ( Chinese made) , and tweezers , for those pesky metal splinters . It is not implement dense , but for your applications , may be just fine .I want to try one ,or at least handle one next time I get a chance .
Another piece of advice , if you aren’t already , start using a small belt or backpocket pouch , and a square tote , of which there are many in the market place , keep a shoulder strap on it , and hang it where possible . Mongo tool belt/pouch combo’s are going by the boards for a lot of the older guys , some sights even ban them . The reason is spinal and hip problems , later in life . Wear suspenders ( CLC, or Occidental ) , they look dorky , but spread load evenly .
Best Regards ,
Chris
Chris
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

