SAK's - Corkscrew or Phillips?
-
A far more interesting question would have been Philips or Panasonic...
-
@Thunderpants said:
A far more interesting question would have been Philips or Panasonic...
-
For me it depends if I'm carrying my leatherman with me. W/ Leatherman I prefer a corkscrew for added versatility. (I mainly use it for untying knots and cleaning fingernails, I don't drink nor do I encourage it) w/o a leatherman I'm kind of torn. Victorinox has the 2d Phillips on the can opener so I'd be cool with a corkscrew on a vic. But I'm more of a Wenger guy so if I don't have a Phillips on the back I don't get one. (Although you can jam the flathead in diagonally and turn a Philip's screw)
If could only carry the SAK it would be:
Victorinox-> Corkscrew
Wenger-> Phillip's -
@Thunderpants said:
A far more interesting question would have been Philips or Panasonic...Philips doesn’t sell eneloops.
So, Panasonic. ;) -
I dont own a SAK yet, working on it ASAP, but to answer this question, I rather have phillips then corkscrew ( I dont drink wine lol )
-
Sir King, the corkscrew is capable of much more than just opening El Vino (see previous posts), and will also carry your mini screwdriver. And your Phillips is pretty much covered with the can opener... So you see the question is more complicated than screws vs. wine.
-
The never ending debate continues ............
:o :D -
Corkscrew for me, its been that was on all the SAKs I have carried
-
Geezz guys... is this debate still going on...?
:PI'll have to say that i've been on both camps, each at a time, through the years... I believe now i have one foot on each camp (50-50) now.
If anything for regular urban/suburban edc the Philips models get more use just because there is less bulk and the sak looks more sleek, but not really because either of the tool's "actual" use. I don't drink wine, and i've already have a driver bit same as the micro SD on my pocket kit so i don't really "need" another one on the Sak, and also the backside Phillips can only really take light torque so not much degree of more heavy usability.
So one Vs another as far as function goes, for me, it's really irrelevant. It's more a matter of aesthetics/feel than anything else for me now...
-
When I figured out that the can opener is a good #2 Phillips driver I've switched sides to the corkscrew team

In that regard the Outrider with its #0/1 inline Phillips and corkscrew suddenly makes a lot of sense to me :D

Also I have to deal more with glasses lately (mini screwdriver) and as shown a couple of posts up, I do use the corkscrew in autumn/winter often to untie wet laces after riding my bike in rain.
-
@MTMatt said:
When I figured out that the can opener is a good #2 Phillips driver I've switched sides to the corkscrew team
In that regard the Outrider with its #0/1 inline Phillips and corkscrew suddenly makes a lot of sense to me :D

Also I have to deal more with glasses lately (mini screwdriver) and as shown a couple of posts up, I do use the corkscrew in autumn/winter often to untie wet laces after riding my bike in rain.
:DThat Outrider looks great!
-
Cheers El C.
It's the slide lock version still.
I prefer the more sturdy saw and the sewing eye on the awl
-
@El Corkscrew said:
@MTMatt said:
When I figured out that the can opener is a good #2 Phillips driver I've switched sides to the corkscrew team

In that regard the Outrider with its #0/1 inline Phillips and corkscrew suddenly makes a lot of sense to me :D

Also I have to deal more with glasses lately (mini screwdriver) and as shown a couple of posts up, I do use the corkscrew in autumn/winter often to untie wet laces after riding my bike in rain.
:DThat Outrider looks great!
+1

-
Overall, the corkscrew gets my vote for its multiple uses and heritage. A back tooled 84/85/91mm SAK looks kind of wrong to me without one. But it does make the knife less comfortable in hand and in pocket. Some of the old fluted ones, which otherwise I like for their appearance, can be downright painful!
(an installed mini SD helps a little). I gave my nephew a small Tinker and was surprised at how much more comfortable it was to use than my Sportsman.I've been using a Camper a lot lately and am so tired of the CS gouging my palm and thumb that I'm waiting for a Hiker to hitch a lift to my pocket.

-
Resurrecting an old thread...
The ongoing Fieldmaster challenge has sparked my interest in this age old question....
I've preferred the corkscrew, in theory, for many years... Since in reality I have EDCed an alox soldier for the better part of 12 years and carried neither one.
My theoretical preference for the corkscrew has made me partial to the Huntsman over the Fieldmaster. But alas, last month I have my Huntsman to a friend and now there's a gap in my collection. The Fieldmaster just might fill that space. But I'm not sure... I definitely use the micro SD in the corkscrew, that's for certain. I don't suppose I keep a mental note of every time I use the can opener as a Phillips, or the corkscrew.

Fellow Knights!

I call upon thee to use the upcoming SAK Stack challenge to help answer this question!
Carve a notch in your walking staff for each time you make a kill with the corkscrew or the Phillips!At the end, we may have a better idea of what tool is better as an EDC. Understanding that neither tool is ideal or perfect... That normal people 😂 would reach for an actual screwdriver or wine opener if given the chance, and conversely, that most of us use the corkscrew as a marlinspike... Percieved need aside, which tool is actually more useful in the pocket for whatever reason arises. Which tool is the duct tape in your kit?
-
I have more use for a Philips sc than a CS.. Kinda avoid SAKs with the CS but do have a few.. As an eyeglass wearer (55yrs) I have never needed a eyeglass screwdriver that I can remember.. So don't need a CS to hold the tiny screwdriver..
-
Phillips by a long shot - and with that being said...I rarely use either when I do carry them. The blades, sissors, and saw get the most use.
-
For the type of work I do (electronics) the Phillips is my choice. The can opener works good for most Phillips screws but I find I frequently run into recessed screws. The T handle isn't great but the backside Phillips can access deeper recessed screws better then say a Leatherman Wave. It's not perfect but in a pinch it works good and I do find I use it over the can opener whenever I can.
I will say though I currently EDC a Super Tinker (which I love), I have been looking at getting a Sportsman or Climber just because the Corkscrew is cool!
-
Welcome to

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login