Showcase: Mods to plier-based multitools
-
-
Just bought a lightly-used Wave today. It won’t be long before I post it on this thread. Now to track down a rebar for parts/pliers!
-
Leatherman chisel bit mod.
Since the second flat driver was essentially redundant, I turned it into something more useful.

Στάλθηκε από το HUAWEI VNS-L31 μου χρησιμοποιώντας Tapatalk
-
Tool name: SOG Power Access Deluxe Plus
Basis: SOG Power Access Deluxe
Aim: Install a file in the PAD. What SOG call a file isn't.
Mods: Inserted a ST300 file after drilling a new pivot hole and profiling a locking surface into it
Links: /post/1731938
-
Tool Name: Matte
Basis: Gen II Leatherman Wave
Aim: Customizing to what I need. More for fun really... ;)
Mods: A few of them...
Links: </topic/76771Tool frame and pliers are acid washed giving it a duller appearance. Thus, the name Matte.

Most of the OHO tools are replaced other than the file. Most recent added is the small utility cutter. May change out the keyport tool as it underutilized. Probably going to switch in a BO 154cm blade.


Some changes on the internal load out. Awl added from the rebar, eyeglass screwdriver sharpened to a needle point. Added a 3D philip and moved the bit exchanger to the outer frame. Drivers are high on my priority list so it pisses me off when I encounter regular/common screws I cannot tackle. On Matte, I have quite a number of drivers - Philips no.0, no.1, no.2( 3D), no.3 and Long shank (no.2). Flat Head- 3.5mm, 4mm and a larger long shank. Borrowed the idea of the long shank on the pocket clip from Obi.



-
Great mods guys

Sent fra min FRD-L09 via Tapatalk
-

Tool Name: Um, modded Charge? Never thought of naming it.
Basis: Leatherman Charge AL
Aim: Two bit tools always available and more readily available scissors. To create a great work/urban tool rather than the Charge/Wave which tries to be rather too many things at once.
Mods: I swapped out the scissors and eyeglass tool for a second bit holder. That was the easy part. I then switched out the serrated blade for 91mm SAK Scissors. These required the pivot hole in the scissors enlarged significantly and with the heels of both tools perfectly aligned so that the LM pivot fits and the tool clears the lock.
Link: /topic/67874 -
Very nice mods Sam Lim and pomsbz
thanks for posting 
-
Nice mods pomsbz

-
excellent mods!!!

-
Tool Name: Modded Wave and Blast
Basis: Wave and Blast
Aim: Remove small bit exchanger and install awl in both
Mods: Blast was a straight-forward swap, Wave required a little work
Links: /topic/78358




-
Toolname: KF4-X
Basis: LM Juices
Aim: To build a KF-4, but add scissors instead of the saw
Mods: Strip down a juices for parts, paint scales
-
Toolname: No name yet
Basis: LM Juices
Aim: To build a "Slim Jim" juice
Mods: Use left over juice parts from other mods

-
Toolname: No name yet
Basis: LM Juices
Aim: To build a bladeless "Slim Jim" juice
Mods: Use left over juice parts from other mods, and cut down the can opener to make a package opener

-
Toolname: Senior Ouchie (Mr. Pinchy was taken)
Basis: Sheffield A100 clone
Aim: To get rid of useless scissors and duplicate flat driver/bottle opener, which tends to twist when force is applied. Also, to fix looseness of tool.
Mods: Scissors replaced with saw from a Coleman Pro Lock, bottle opener/flat driver replaced with a scraper blade from a Schrade Tough Tool. Lower pivot repaired with a pivot from an old Kobalt tool.
Link: /topic/78407
-
Toolname: Half-a-Squirt
Basis: Leatherman Squirt PS4
Aim: To salvage remaining usable parts
Mods: Got rid of the broken plier head and file. Fit all remaining tools on one handle
Link:/topic/78289
-
@BePrepared said:
Toolname: No name yet
Basis: LM Juices
Aim: To build a "Slim Jim" juice
Mods: Use left over juice parts from other mods

That is a really neat tool.
-
Not sure if this is the best place for a reference on tool thicknesses, but might be useful for others planning mods. It could be (much) expanded to cover other tools...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login