BEAR! Super Bear Jaws 156
-
Time to dig out the cooler shades

Neil
-
Very nice pictures btw. A question, re: 7th picture down.
those little lock release levers can i call them? In one of your pictures it shows the blade deployed then one of those levers sticking out ready to be depressed to unlock the blade? I was wondering if they are always sticking out like that whenever a tool is in the locked position? If so, isn't that a bit dangerous when squeezing the handle could the blade become unlocked and close while using the tool?
-
@Sean said:
Very nice pictures btw. A question, re: 7th picture down.those little lock release levers can i call them? In one of your pictures it shows the blade deployed then one of those levers sticking out ready to be depressed to unlock the blade? I was wondering if they are always sticking out like that whenever a tool is in the locked position? If so, isn't that a bit dangerous when squeezing the handle could the blade become unlocked and close while using the tool?
The levers are indeed always sticking out. :-\ It's certainly not the slickest release system in the world. ::)
To answer your question, I suppose it is theoretically possible to unlock the knife accidently during use, but its not very likely. The amount of force required to push the levers down is considerable; it usually leaves an indentation in my thumb after one use. Therefore I tend to unlock a blade by unfolding the next blade alongside it, just like the old Super Tool works. (If I were an everyday Bear user, I would probably just remove the levers altogether.) :P
-
@J-sews said:
The levers are indeed always sticking out. :-\ It's certainly not the slickest release system in the world. ::)To answer your question, I suppose it is theoretically possible to unlock the knife accidently during use, but its not very likely. The amount of force required to push the levers down is considerable; it usually leaves an indentation in my thumb after one use. Therefore I tend to unlock a blade by unfolding the next blade alongside it, just like the old Super Tool works. (If I were an everyday Bear user, I would probably just remove the levers altogether.) :P
Spot on that.
-
The levers are indeed always sticking out. :-\ It's certainly not the slickest release system in the world. ::)
To answer your question, I suppose it is theoretically possible to unlock the knife accidently during use, but its not very likely. The amount of force required to push the levers down is considerable; it usually leaves an indentation in my thumb after one use. Therefore I tend to unlock a blade by unfolding the next blade alongside it, just like the old Super Tool works. (If I were an everyday Bear user, I would probably just remove the levers altogether.) :P
Spot on that.
Yeah the levers are a bit of a hindrance sometimes :( but it is a little quicker to put things away ;)
-
could you just take the levers out and put some spacers in?
-
You can. I did just that with my carry Bear 155L. I personally find the locking tabs the most irksome feature of Bears. You can remove the tabs and install washers to make up the slack. One warning: if you plan on doing this, try each individual tool before removing the lock to see if you can unlock them as on the Supertool. I found that some of the 155's tools wouldn't sufficiently depress the lock tab to unlock whatever tool was opened (i.e. if the knife blade was open, pulling out the can opener might not let the knife close, but pulling out the saw might). I eventually ground the lock down (the tab which goes into the slot on the tools) so that it offered resistance to the tool closing, but did not totally lock the tool. I only did this on my worst-built Bear 155 (the tool's alignment was erratic). I actually use it almost every day and like it, but WOULD NOT do it to a good 155 or a Super.
-
I wish I could see all the pics...
-
Looks like the links broke when the site was moved over to http://www.swissarmyknights.com/ - worth a search there.
-
Actually the pics are now over here... http://wiki.multitool.org/tiki-index.php?page=Super+Bear+Jaws+156
-
If anyone needs specific photos of Bear Jaws 155, 155L, 156, 156L, 157SM, Craftsmam non-locking & locking tools, and mini Bear Jaws; just let me know and I'll start a thread this evening.

-
@gerleatherberman said:
If anyone needs specific photos of Bear Jaws 155, 155L, 156, 156L, 157SM, Craftsmam non-locking & locking tools, and mini Bear Jaws; just let me know and I'll start a thread this evening.
How can we BEAR the lack of pics!!? :ahhh :D
-
@gerleatherberman said:
If anyone needs specific photos of Bear Jaws 155, 155L, 156, 156L, 157SM, Craftsmam non-locking & locking tools, and mini Bear Jaws; just let me know and I'll start a thread this evening.
How can we BEAR the lack of pics!!? :ahhh :D
-
@ThePeacent said:
How can we BEAR the lack of pics!!? :ahhh :DThat has bearing on what I asked, TP!
:DI post up some pics tonight, if I can remember(someone please remind me). :ahhh
-
@gerleatherberman said:
If anyone needs specific photos of Bear Jaws 155, 155L, 156, 156L, 157SM, Craftsmam non-locking & locking tools, and mini Bear Jaws; just let me know and I'll start a thread this evening.
Yes please.
I'm interested in the Super Bear Jaws because of the how the tools open and because I prefer 4½" tools to 4". Hence the Necro here.
I have already looked at Chako's thread here: /topic/52527
Does 'L' stand for Locking? -
I've updated the first post so the pics are back.
-
Thanks mate!

I found this one too: /topic/3754 -
-
Thanks for fixing it, zoidberg!

Syncop8r,
The L does mean locking. But, as you'll read in many threads on Bear and Sons Bear Jaws, the system is highly flawed.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

