Need to understand "Rebar Love"
-
Several toys came in today in the mail. Used the Rebar plain edge blade to open the packaging. Cool toys.

Day 20:



-
Fun Haul G-man.

DAY 22
A not so "Gritty"
Glamor shot today.
The Bosses have started to move me more out of the field and into the office, so I'm not getting as many good action shot opportunities.
Not so sure I'm very fond of dealing with the computer programs, but I'll get there.
-
@Dutch_Tooler said:
One conclusion for me is that the Rebar is a very suitable tool for regular carry - pocketable and versatile, especially if combined or modded to make available some everyday tools it omits as stock (such as scissors).I do think the Rebar could benefit from some scissors. In my view, the serrated blade is extraneous. One could delete the serrated blade and the lanyard ring, and replace them with a pair of scissors to make a more versatile tool.
And I'd kinda like to see a small flat driver as well.
But, given it's compact size and overawl ability, the Rebar is a very capable tool in a small package.

-
Well said Nix.

After using the Charge for a challenge and off and on sense, I feel the Rebar could also benifit from adding the Bit holder. Although I would not relly want to give up the slim reach of the dedicated phillips.
-
@Douglas said:
Fun Haul G-man.

DAY 22
A not so "Gritty"
Glamor shot today.
The Bosses have started to move me more out of the field and into the office, so I'm not getting as many good action shot opportunities.
Not so sure I'm very fond of dealing with the computer programs, but I'll get there.
Thank you, Douglas!

I went to school for Cisco network engineering. I now get scared thinking about sitting at a computer terminal. I guess I could if need be, but I don't think I'd like it. :ahhh
At least your chances of getting cut and electrocuted are much lower in the office. :)Good luck transitioning to the office work!

-
Nice shot Douglas

Here's hoping for interesting challenges ahead in your job!Nice haul GLBM
and that all in one package
:ahhh -
More great pics guys
I have been neglecting my Rebars lately
Guess I need to carry one of them tomorrow as I already have my carry and been out the door to work for nearly an hour ::) :DDon't worry though I am riding this morning and not driving :D
-
@Poncho65 said:
More great pics guys
I have been neglecting my Rebars lately
...
Don't worry though I am riding this morning and not driving :D

Shame on you for neglecting your Rebars. Coming out of the Swisstool and Spirit Challenges and straight to your Rebar is one of the inspirations behind the "Need to Understand" Challenge.I am glad to here you're getting to ride, and not drive. That's always nice.
Still...
...

-
Thanks everbody for the well wishes. Nothing has been made official yet, but I have not had a full day in the Field in over two weeks.
:ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh -
@Dutch_Tooler said:
Nice haul GLBM
and that all in one package
:ahhhThank you, D_T!

It was three packages. :ahhh
One box and two padded mailers. Box was from ChopperCharles(wrench tool, two coast handyman tools and a hobo knife), large package was a MultiMaster, and small pacage was ToughChip.I know.

Poncho,
Show that Rebar some love!
@Douglas said:
Thanks everbody for the well wishes. Nothing has been made official yet, but I have not had a full day in the Field in over two weeks.
-
Day 23

I actualy got out in the field for a couple of hours today.

-
Good shot!

-
Day 21:
Kikkerland Crab Tool arrived. :DRebar was the welcoming committee.

-
+1!
@gerleatherberman said:
Day 21:
Kikkerland Crab Tool arrived. :DRebar was the welcoming committee.
I'd seen the crab tool on pics before - that is a very funny contraption... :D
-
Thank you, D_T!

. -
**Day: 22. **
Used the flat driver to tighten some loose screws on knobs. The flat blade on the Rebar(and found on other LMs) seems well suited for this type of screw. :)

-
Good stuff G-man.

Spent most of the day in the office again today.Checking in parts was just another boring solo job for Rebar today.

Then along comes a distant Swiss cousin with a fun challenge. Some freight seemed to need a closer inspection and the metal bands must first be cut.
The two (Rebar and Swiss cousin) teamed up for the job and those bands were just no match for the duo.


*** Job well done Guys! *** -

Good job
Keep it going guys, just a week to go :ahhh
-
Plenty of great uses and pics guys

-
New Page 'Nanas:

@Douglas said:
After using the Charge for a challenge and off and on sense, I feel the Rebar could also benifit from adding the Bit holder. Although I would not really want to give up the slim reach of the dedicated phillips.What about using a Removable Bit Driver?
It fits onto your dedicated phillips. 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login