Need to understand "Rebar Love"
-
Thank you, D_T!

. -
**Day: 22. **
Used the flat driver to tighten some loose screws on knobs. The flat blade on the Rebar(and found on other LMs) seems well suited for this type of screw. :)

-
Good stuff G-man.

Spent most of the day in the office again today.Checking in parts was just another boring solo job for Rebar today.

Then along comes a distant Swiss cousin with a fun challenge. Some freight seemed to need a closer inspection and the metal bands must first be cut.
The two (Rebar and Swiss cousin) teamed up for the job and those bands were just no match for the duo.


*** Job well done Guys! *** -

Good job
Keep it going guys, just a week to go :ahhh
-
Plenty of great uses and pics guys

-
New Page 'Nanas:

@Douglas said:
After using the Charge for a challenge and off and on sense, I feel the Rebar could also benifit from adding the Bit holder. Although I would not really want to give up the slim reach of the dedicated phillips.What about using a Removable Bit Driver?
It fits onto your dedicated phillips. 
-
@Douglas said:
Good stuff G-man.
Spent most of the day in the office again today.Checking in parts was just another boring solo job for Rebar today.

Then along comes a distant Swiss cousin with a fun challenge. Some freight seemed to need a closer inspection and the metal bands must first be cut.
The two (Rebar and Swiss cousin) teamed up for the job and those bands were just no match for the duo.


*** Job well done Guys! ***Awesome use, Douglas! A *shear * success.

Thank you, D_T and Poncho.

-
@Syncop8r said:
New Page 'Nanas:

After using the Charge for a challenge and off and on sense, I feel the Rebar could also benifit from adding the Bit holder. Although I would not really want to give up the slim reach of the dedicated phillips.
What about using a Removable Bit Driver?
It fits onto your dedicated phillips. 
True. I considered this too, on the way to my Rebar VX, but decided against it because I'd have to pack yet another item, which in addition is a little bit too bulky for the 2D bits because it had to be sized to also accommodate the normal 1/4" bits...
But this way you'd keep the slimmer fixed Phillips. I put mine in the ReWaveR instead
-
DAY 25
Did a little tree climbing today...
New Page 'Nanas:

After using the Charge for a challenge and off and on sense, I feel the Rebar could also benifit from adding the Bit holder. Although I would not really want to give up the slim reach of the dedicated phillips.
What about using a Removable Bit Driver?
It fits onto your dedicated phillips. 
True. I considered this too, on the way to my Rebar VX, but decided against it because I'd have to pack yet another item, which in addition is a little bit too bulky for the 2D bits because it had to be sized to also accommodate the normal 1/4" bits...
But this way you'd keep the slimmer fixed Phillips. I put mine in the ReWaveR instead
D_T you nailed it for me too.

Having seen my pocket dumps the last thing I need is one more item pulling on my belt.
-
Agree. -
They're tiny.
Come on, I get commission for these.... 
-
Day 23
Taking a watch band off that needs gluing. Will glue it tomorrow. But, the Rebar blade worked nicely to locate and remove the spring bar. :)

-
Good work G-man.
Hows the hand healing? -
Thank you, Douglas!

The hand is doing quite alright. Just have to be careful extending it with force, as the bone surface hasn't bonded yet. Strange how such a small entry wound can cause mild bone damage. :ahhh
BTW. Posted your tree climber to the August thread.

-
@Douglas said:
DAY 25
Did a little tree climbing today...
New Page 'Nanas:

After using the Charge for a challenge and off and on sense, I feel the Rebar could also benifit from adding the Bit holder. Although I would not really want to give up the slim reach of the dedicated phillips.
What about using a Removable Bit Driver?
It fits onto your dedicated phillips. 
True. I considered this too, on the way to my Rebar VX, but decided against it because I'd have to pack yet another item, which in addition is a little bit too bulky for the 2D bits because it had to be sized to also accommodate the normal 1/4" bits...
But this way you'd keep the slimmer fixed Phillips. I put mine in the ReWaveR instead
D_T you nailed it for me too.

Having seen my pocket dumps the last thing I need is one more item pulling on my belt.
That is a beautiful pic Douglas - I second the nomination!

Good to hear the hand is healing up well GLBM
but try to keep it that way willya? Using a blade on a watch like that made me cringe just a bit :D -
Thanks, D_T!

I wouldn't have used the Rebar blade if I didn't already know the spring bars were new (just put them in a week ago). Now, old corroded spring bars require something dull. :ahhh
-
@Dutch_Tooler said:
That is a beautiful pic Douglas - I second the nomination!
Good to hear the hand is healing up well GLBM
but try to keep it that way willya? Using a blade on a watch like that made me cringe just a bit :DThanks for the nomination and the second.
G-man I must add an emphatic
+1 -
Put new band on the Victorinox watch from yesterday's photo. New band gives the watch a 'bigger' look. :)
I used the ReWave pliers to pull frail spring bars out to install bigger bars for my Citizen Solar-Tech. :)
**Day 24 **


-
Here's another of the tree climber picks from yesterday.

DAY 26
Today has been kinda quiet just made my belt a litle smaller...

and took a glamour shot with the sheath from the Rebar that started the challenge.

At least I didn't loose it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
