Show Us Ya SOGs
-
Nice one jaya

-
Thanks Wspeed

This ParaTool is more pocketable than my PPP... will see if I like the swivling plyers...
-
Nice one JM! I've always fancied getting a ParaTool - it has a very pleasant old tool quality to it... if you know what I mean.
-
Thanks Fuzzy... I think I know what you mean... finishing on the tools seems not as good as on modern ones... the metal material (at least) on the blade (though I like the PE blade V-grind) looks softer than modern ones... I sharpened it quicker than sak blades... but maybe this is just me...

-
My SOG PAD just got a new, "just slightly" better file...
-
@jaya_man said:
Thanks Fuzzy... I think I know what you mean... finishing on the tools seems not as good as on modern ones... the metal material (at least) on the blade (though I like the PE blade V-grind) looks softer than modern ones... I sharpened it quicker than sak blades... but maybe this is just me...
after handling and owning about 14-16 SOGs, that's my impression too

-
to ya Señor El P 
-
Playing with macro edits...
-
Very nice GLBM

Thank you, W!

@ThePeacent said:
cool!
Now you only need the final version with different saw, 1/4" driver and Plain Edge blade :DThank you, TP!

I've got my next paycheck MT money spent, but will definitely be looking out for a V.3.
I might have missed some differences in between the 3 PP versions I have, I took an in-depth overview on them and this is what I found,

The one with the lanyard (on the left) is the newest one,* I am inclined to believe*, and I *think *none of them have been modded
From L to R:
Plier head:
a. very rounded and polished plier head, without any sharp corner, all the jaw's edges are chamfered, these are the longest and slimmest
b. rounded tips and pliers, but not as much as the first one, there is less chamfering/rounding on the far back of the jaws, closer to the pliers, and it is not as long and slender as the newer jaws, but not as short and stubby (blunt) as the oldest ones
c. squared ends, defined edges and sharper, straighter corners and lines on all of the jaws and pliers, they are also shorter and stubbier

Saw and tools:
a. the newest one (left) has a 1/4" driver, a flathead ended file, much coarser, and a saw with much finer teeth
b. the old one has a round-end file, Robertson screwdriver and a wide teeth saw
c. the oldest one has the same saw, same Robertson driver but the file is an even older version of the flathead ended file, I believe previous to the round file (ignore the wear on the file)
Handles:
they seem to be the same on the three, the newest one (now on the center) has a lanyard attachment that the other two lack, I believe it came like this from factory, ???, and the screws are the same (Hexagonal) on all there :)
so, with no absolute certainty, I am pretty sure that the changes have been:
Version 1: wide teeth, Robertson, flat file, thick stubby squared jaws
Version 2: wide teeth, Robertson, round file, thick stubby somewhat rounded and chamfered jaws
Version 3: small teeth, 1/4" driver, flat file, thinner slimmer rounded and chamfered jaws, adds a lanyard ring attachmentthat is *not *an undebatable statement, and any modding of the tools would change that, but it's what I've come to believe after this exploration of my three PowerPliers

-
Very nice GLBM

Thank you, W!

@ThePeacent said:
cool!
Now you only need the final version with different saw, 1/4" driver and Plain Edge blade :DThank you, TP!

I've got my next paycheck MT money spent, but will definitely be looking out for a V.3.
I might have missed some differences in between the 3 PP versions I have, I took an in-depth overview on them and this is what I found,

The one with the lanyard (on the left) is the newest one,* I am inclined to believe*, and I *think *none of them have been modded
From L to R:
Plier head:
a. very rounded and polished plier head, without any sharp corner, all the jaw's edges are chamfered, these are the longest and slimmest
b. rounded tips and pliers, but not as much as the first one, there is less chamfering/rounding on the far back of the jaws, closer to the pliers, and it is not as long and slender as the newer jaws, but not as short and stubby (blunt) as the oldest ones
c. squared ends, defined edges and sharper, straighter corners and lines on all of the jaws and pliers, they are also shorter and stubbier

Saw and tools:
a. the newest one (left) has a 1/4" driver, a flathead ended file, much coarser, and a saw with much finer teeth
b. the old one has a round-end file, Robertson screwdriver and a wide teeth saw
c. the oldest one has the same saw, same Robertson driver but the file is an even older version of the flathead ended file, I believe previous to the round file (ignore the wear on the file)
Handles:
they seem to be the same on the three, the newest one (now on the center) has a lanyard attachment that the other two lack, I believe it came like this from factory, ???, and the screws are the same (Hexagonal) on all there :)
so, with no absolute certainty, I am pretty sure that the changes have been:
Version 1: wide teeth, Robertson, flat file, thick stubby squared jaws
Version 2: wide teeth, Robertson, round file, thick stubby somewhat rounded and chamfered jaws
Version 3: small teeth, 1/4" driver, flat file, thinner slimmer rounded and chamfered jaws, adds a lanyard ring attachmentthat is *not *an undebatable statement, and any modding of the tools would change that, but it's what I've come to believe after this exploration of my three PowerPliers

Thank you very much, TP!

I love the version 1 a lot. Those blunt pliers...
-
Paratool with the Rebar today. :)

-
Nice selection GLBM

-
ParaTool got me messing around with oldschool SOGs (PowerLock an earlier..non-fixed plier).
Left to right.
Early ParaTool, later ParaTool, early PowerPlier, Later PowerPlier, early PowerLock pre-patent, early PowerLock 2.0, PocketPowerPlier pre-patent(made in Edmonds WA), and PocketPowerPlier (made ib Lynnwood, WA).I'm always amazed at how well these older SOGs were built. :)

-
Cool pic

-
Took a $37( $30+$7 ship)gamble on Ebay with no photos of toolset. I saw the shortened handle covers(some have the shortcovers to allow using the drivers at half stop w/cover shut), so I knew it was one I didn't have. To add icing to the cake, it was BO, and I didn't have a BO PowerLock. It was listed as used with sheath. Received it today and am thrilled. It is a Black Oxide PowerLock Traveler. The traveler is bladeless and quite expensive when new. The tool has not been used and everything is the way it should be.
The BO is still fresh enough my fingers are a little black. So, that is a good thing, as that means it wasn't used much (if at all).I haven't had the best luck on Ebay lately, so this was a welcomed surprise. Should make an excellent shelf queen. :)
I am just excited about it.





-
:ahhh

that's a rare one to find, and when somebody asks (quite frequently in the forums) for a bladeless tool I always spit out the classics (Victorinox Jetsetter, Gerber Dime, Gerber Bladeless MP600, etc.) but I never mention this one because it's really expensive and hard to find, :P
so you got an excellent price on a very cool tool!!!

-
Nice edition to your collection GLBM

-
@ThePeacent said:
:ahhh
that's a rare one to find, and when somebody asks (quite frequently in the forums) for a bladeless tool I always spit out the classics (Victorinox Jetsetter, Gerber Dime, Gerber Bladeless MP600, etc.) but I never mention this one because it's really expensive and hard to find, :P
so you got an excellent price on a very cool tool!!!

Thank you, TP!

It is crazy the Traveler (PL w/o blade and added Robertson driver) cost almost twice what a regular PL does. :ahhh
I mean, $40-$50 more for no blade and a robertson driver? SOG SOG SOG.
Thank you, W!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login