Coleman Pro Lock
-
If and when you do mod it, I would love to see what you have done with it.
-
I've been EDCing my new Pro-Lock for 3 or 4 days now, and my impressions of the tool have only improved. I installed a headboard to a new bedframe with it, and the drivers were great. There was one screw on each side that would have been easy to get to had I put it in before putting the mattress back on,... but I wasn't about to take it back off again. Popping the tool handle out and using it on the screw while I had the pliers on the nut was just genius. I couldn't have easily fit the whole tool back in there to turn the screw, and I'd have needed another tool to hold the nut. So, that was a use case I am surprised to have actually come across.
I do get the "Feels like a Schrade" thing... but I like it more than the Schrade Tough Tool ST5E I had. It's a lot smaller folded up, and it slides into the belt pouch and almost disappears on my hip. I often carry a pouch with something in it -- usually my Victorinox Troubleshooter in a leather sheath. This Coleman sheath may be wider, but it doesn't stick out hardly at all, and I find I don't catch it on things or bump into it with my arm. It's almost like its not there.
The pliers are long needle nose and the handles are beefy. They feel very solid to me, not cheap at all. Because of the shape and the tool cartridges, the blades and drivers are on the short side. The file isn't very good. It will do nails, but it's not aggressive enough for anything other than that. It's a good flat driver though.
I'm finding it really useful, and I enjoy using it more than I thought I would. That said, I do have an affinity for the odd and underdog tools... so keep that in mind :)
Charles.
-
So I'll just leave this little pro-lock mod here... :)
Charles.

-
Skizzers! What a good idea!

-
Nice mod, Charles! The ProLock is on my cheap-radar. Maybe this coming weekend I'll order one. :)
-
You can get them new on eBay for $20 plus shipping. VERY worth it.
Charles.
-
@gerleatherberman said:
Nice mod, Charles! The ProLock is on my cheap-radar. Maybe this coming weekend I'll order one. :)If it's on your cheap radar, you might miss it and never ever see it!! :D
-
Nice mod, Charles! The ProLock is on my cheap-radar. Maybe this coming weekend I'll order one. :)
If it's on your cheap radar, you might miss it and never ever see it!! :D

Very nice!
-
$27 with shipping for a brand new one. That's what I did, and it was worth every penny.
I also found a used one for $10, (almost $20 shipped) and snagged that too. It's well-used, but not abused. The blade was resharpened poorly, and someone didn't clean the gook off the can opener last time they opened a can of something, so the tools were stuck together and grody. But it was in good shape nonetheless. Lots of the off-brand MTs turn to dust after heavy use. The Pro-Lock doesn't.
At any rate, I bought the cheapie just for the spare cartridges. The new one though, recently that's my EDC. It's always on my hip. It takes up far less space than other multis, and it's just really nice to have. I love the long needle nose. I actually used them to bend a wire on my girlfriend's braces last night, which was poking her in the cheek and causing a nasty little wound to form.
Charles.
-
So, more Pro-Lock mods today! I have completed a full cartridge!
In this cart there are the scissors from a Sheffield A100 clone, a scraper blade from a Schrade Tough Tool, an awl made from one of the Pro-Lock phillips drivers, and a better file from a Coast Pocket Toolbox. The file technically is a duplicate. It is however much more aggressive than the file in the Pro-lock, and it has a nail pick on the end instead of a flat screwdriver.
I've currently completely buggered a Surge bitdriver, so i have to order another one, but the final cartridge will have leatherman bitdrivers and take leatherman bits.
Charles.

-
@ChopperCharles said:
So, more Pro-Lock mods today! I have completed a full cartridge!Well done, you have taken your Pro-Lock much further than Coleman ever managed to.

Like a few others here on MTo I was disappointed that Coleman never followed up and developed the Pro-Lock concept more, as it showed considerable promise for customising the tool load to what particular buyers wanted.
-
Thanks to everyone who recommend a ProLock for the collection! Mine came yesterday me I am blown away at the cool factor. :)
Quality it there and being able to remove the cartridges to use the smaller tools(example: screw driver) is awesme. Makes finer work a walk in the park.
I'll post pics of it with the Buck 360, Schrade TT, and SOG ParaTool at some point. Maybe tonight. The Coleman ks a truly neat piece of MT ingenuity.

-
I've actually had call to use the tools separate from the pliers on several occasions now. I don't know how I got along without this in the past! Was able to de-tangle a fine necklace using the can opener and the smallest screwdriver blade (which is my inspiration for putting an awl in my DIY cartridge), and needed two tools. It was super convenient to be able to just pop the cartridges out and use them as I needed. I used the pliers to hold a nut while turning an inaccessible screw, and I've used the serrated blade several times to cut foam to fit knives for display. Fine work made easy because the cartridge pops right out of the multi tool.
Now in the garage I find one-handed tools a lot more useful, like the Coast Pocket Mechanic or the Gerber Multi-plier. But for every day carry, for something to have on my belt at all times, I grab the pro-lock.
Charles.
-
MWA-HAHAHAHA
This wasn't cheap, but it is awesome. I've finagled Leatherman drivers into one of the Pro-Lock cartridges! I've also realized that of all the tools the pro-lock has, a bottle opener is not one of them. That's not a big deal, because pliers are essentially a bottle opener... but I didn't have a last tool to put in with the bit drivers, so I went spelunking through my tool pile and found this opener out of a Sheffield A100 clone, and decided to repurpose it. (after a lot of grinding and re-working the pivot)
I think I'm going to move some blades around to get a more optimal setup for the tools I keep loaded in the handles on a day-to-day basis, but otherwise my modding is done I think.
Charles.

-
Looks great so far, Charles!

-
This will be the ultimate Frankenstein multi-tool, but with the added bonus of looking amazing!

-
Thanks! I keep the tool with the scissors in it loaded instead of the one with the saw and serrated blade, as I find the scissors, awl, and nail file more useful than the serrated blade, drivers, and saw in the original cartridge. BUT it'd be nice if I didn't need two files...the original just isn't very sharp, but I don't want to molest the original cartridges. For some reason I want to keep them stock.
Charles.
-

I'm always amazed at the improvements consumers can make on a pro design. From cars to multi-tools - it's truly impressive!

-

great work so far!!!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login