Newbie modding SAKs
-
Good of a place as any to share a pic like that
Looks very nice to me

-
I don't like trashing, and I had some pieces of clips I broke during the making process this summer; so here is a microTi clip made ouf of half a broken full-size clip:

-
<u>Time to make a Trail Guide</u>
There are some times I want a Trail Guide, but I want it with the current metal file and the older blade

I already made a Wenger sized Trail Guide baby a few days ago, that I am happy with, but still wanted to make an "original" Trail Guide.
<u>What do I have for a start</u> :
- Already re-assembled Compact (from Compact and Camper parts)
- Handyman with current metal file and back spring chisel
The Compact :
The Handyman :
-
- Disassembly of the Compact
Drilling existing pivots (note the bad peening I did on that one before)
Time to pry out the parts
- Disassembly of the Handyman
Removed first layer (blade layer)
Removing metal file layer




- Disassembly of the Compact
-
-
Assembly of the Blade layer
no pics, I forgot -
Assembly of the metal file layer and the separator
I used the Handyman file and not the one from my mountaineer because I wanted to have a back tool. An awl at first, but the ones I had were not in good enough condition. Finally went for the chisel :
-
Assembly of the scissors layer
I wanted to use the hook without nail file from the Handyman, but forgot during the assembly process...
-
Blank testing




-
-
- Putting washers back on
8 ) Cutting excess (about 1mm above the washer is nice for peening)
-
Peening
no pics, I was too nervous in the process to think of taking pics ... -
Putting on the scales (re-use of the black scales of the disassembled Compact) and family picture



- Putting washers back on
-
Lovely mod!

If you want a back side awl or two, I have some spare I'd be happy to send you.

-
Sweet!

I also have a spare backside awl if needed.
-
If you want a back side awl or two, I have some spare I'd be happy to send you.

@Don Pablo said:
Sweet!
I also have a spare backside awl if needed.
Thank you for the offer guys :)
I'll see what I can do with mines before bothering you, and I need to find something to give in return too
-
Lovely mod!

If you want a back side awl or two, I have some spare I'd be happy to send you.

@Don Pablo said:
Sweet!
I also have a spare backside awl if needed.
Thank you for the offer guys :)
I'll see what I can do with mines before bothering you, and** I need to find something to give in return too**
No you don't - We've all had plenty off others

-
Lovely mod!

If you want a back side awl or two, I have some spare I'd be happy to send you.

@Don Pablo said:
Sweet!
I also have a spare backside awl if needed.
Thank you for the offer guys :)
I'll see what I can do with mines before bothering you, and** I need to find something to give in return too**
No you don't - We've all had plenty off others


I feel guilty for sponging so much stuff off mags... :-[ I need to give something back. ;) -
@Don Pablo said:
Lovely mod!

If you want a back side awl or two, I have some spare I'd be happy to send you.

@Don Pablo said:
Sweet!
I also have a spare backside awl if needed.
Thank you for the offer guys :)
I'll see what I can do with mines before bothering you, and** I need to find something to give in return too**
No you don't - We've all had plenty off others


I feel guilty for sponging so much stuff off mags... :-[ I need to give something back. ;)Dude - you're not sponging anything off me - I'm just circulating what I've received from others - does me a favour as well - stops my motley crew from becoming a collection :ahhh
-
today's challenge : make a non locking blade spring (with combo tool) able to get a locking blade !
Let's disassembly the custom Wenger trail guide from the previous build :
after disassembling the a wenger with locking blade and evo scales, I found out that contrary to Vics, the washers on one side look one piece with the rivet... Let's drill these to actual usable washers :



-
To understand the mechanism of the locking blade, I made a little jig :


-
It was then time to reproduce the cut on the spring... not an easy task to get something working...
Top is original locking spring, bottom is the one being cut to size with a dremel cutting disc
Lots of fine tuning using a diamond file


-
To pre-peen the rivets from a 2.5mm brass rod, I made an aluminium jig for the vice :
Rivet is ready for assembly, final peening is done once the SAK is assembled!



-
Back to assembly
With the file in the middle this time ...
Cutting rivets to size
Peenig and filing




-
Pfiuuuuu, that was a tough build!
Here is the Wenger TrailGuide Evo S

(the spring modification was far from easy)

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
