Seeking Rebar modding advice.
-
I got my Rebar today, and while waiting for it to arrive in the mail, I have been looking into modding it a bit.
- I want to remove the knives
- I want to add bit drivers
“Why didn’t I just order the knifeless model?”
- knifeless Rebar is 94€ and the regular Rebar is 75€....yeah don’t ask why you pay more for less tools.
Anyway; so first things first
I need some advice on disassembling the Rebar, starting with the pivots opposite of the pliers head, where the tools are.
I currently don’t have any of Loki’s wrenches, so without one of those, is there any good way of “undoing” the pivots?
I have tried with different kind of pliers, but no luck.

Sent from my iPhone using Tapatalk
-
Having done it the hard way I would get loki's wrenches if I were you. I made my own Engineer pliers and they worked fairly well
/post/1032297. The pivot on the Rebar is harder than others to get a grip on due to the frames design. It can be done without loki's wrenches but you will damage the heads of the pivot screws.The main thing is to heat the pivot to loosen the loctite. Also only one side of the pivot turns as the other side is keyed into the frame.
-
As Steve said, get the Loki wrenches. You'll destroy the screw heads using pliers of any kind. :ahhh
If you damage the screw heads, you void the warranty I think.
Also, the Rebar tool "d-pivot" pivot is set in a d-shape hole in one side, so only one side will unscrew. Be careful, even with Loki wrenches. And split for the + shaped wrenches from Loki, as those have every LM parse screw covered.

-
Like what everyone said. Get Loki's wrench. To be very honest, before I got my hands on them, I felt they extremely expensive for 2 piece of metal cut to shaped to open LM tools.
I cannot live without them now. I should have bought them from the very start of my modding adventure. They are very well made and definitely worth the money spent!! Save yourself the trouble. Go get them!
-
Loki wrenches are worth their weight in gold

Especially as you won’t damage the pivot screws
-
If cost is an issue and it's just a one-off mod, perhaps someone within easy posting distance could lend you some?
-
Okay
has spoken....loki wrenches it is then.....thanks lads! 
-
You guys seem rather enthusiastic about Loki’s wrenches. :D
-
I don’t know of anyone else making these wrenches
So loki-mobile has got the best wrenches that are available
-
@Don Pablo said:
You guys seem rather enthusiastic about Loki’s wrenches. :D
I was until mine stripped out completely. Engineer pliers for me.
Is there any good write up on taking a Rebar apart?
Sent from my iPhone using Tapatalk
-
This one is worth a look: /topic/37322
-
@Don Pablo said:
You guys seem rather enthusiastic about Loki’s wrenches. :D
I was until mine stripped out completely. Engineer pliers for me.
Which one stripped out, if it was an early 4 way one and the PST size loki will likely send you a replacement. I have one and I guess the PST size was slightly oversized which would cause it to slip. loki sent me a replacement.
-
1st “mod”.......angle-grinderfabulous knife delete..so now it is at least legal to carry in public, and this still was more feasible than paying 25€ more for the “knifeless” model, even though it was a mentally painful thing to do.


Anyway...
A post in Antti Lammi’s “Tool test” thread made me think twice about adding a 2D bit adaptor to my Rebar.The Rebar has the 3D bit extender, which is great in itself, but is also comparable with leathermans bit extender. The bit extender can be found for like 20-25€.
Where as buying a set of Loki’s wrenches + bit adaptor parts adds up to around 40€, so almost twice as much.
What are your guys thoughts / opinions on this?
A): save money and go for LMs bit extender, and opt for 3D bits compatibility
B): pay more and go for Loki wrenches + 2D bit adaptor parts and be compatible with both 2D and 3D bits
Sent from my iPhone using Tapatalk
-
Ouch - my eyes :D
Do remember that Loki's wrenches will be useful more than once. I never regret buying mine. I see a lot of modding in your future.
On the 2D bit driver for the Rebar, I've done this too, making the Rebar VX a carry option (even pocket carry) without needing to carry the removable bit driver separately, or necessarily all the bits. On the other hand leaving the Phillips in gives you the option of using normal 1/4" bits if you carry the removable bit driver. Whatever you think suits you best...
-
@Dutch_Tooler said:
Ouch - my eyes :DI know....almost brought tears in my eyes to do too. But it would be no good to me if I can't carry it on a regular basis and would just lay around the house somewhere.
The laws here are so strict that you are looking at upwards of 5000 euro fines and it can actually lead to jail time if you are caught carrying a knife in public as well.
So I had to do, what I had to do.....definitely not that I am proud of it...more like the opposite

@Dutch_Tooler said:
Do remember that Loki's wrenches will be useful more than once. I never regret buying mine. I see a lot of modding in your future.On the 2D bit driver for the Rebar, I've done this too, making the Rebar VX a carry option (even pocket carry) without needing to carry the removable bit driver separately, or necessarily all the bits. On the other hand leaving the Phillips in gives you the option of using normal 1/4" bits if you carry the removable bit driver. Whatever you think suits you best...
Yeah...decisions...decisions :ahhh
What I really like about the 2D bits; is that you can carry pretty much the amount of bits in the same amount of space (e.g. pouch) as with 3D bits, and in 90% of cases; 2D bits does the job just fine, it's usually only the really stubborn or rounded out screws that the 2D bits struggle with.
With that said, 2D bits are expensive, scarce and easily lost, where as any hardware store has 3D bits and a whole set of them including Phillips, Flatheads, Torx, Hex etc. for under 10 Euro.....I have been using the same 5 Euro bit set I bought on Amazon for over a year now, with no problems or any signs of heavy wear....but when they break or gets lost, I'm not going to cry or be sad about it either as it will be no problem to get a new set of 3D bits.
-
No one else have any thoughts / opinions on the matter, that they want to share?

Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

