Tool test
-
That was fun!

Why did you grind the Wave can opener?
The Rebar is excellent. It is so comfortable to hold. I love it.

-
Thanks Antti for comparing the LM MTs
This is very good information

-
Well done sir, and thank you for taking the time to do this comparison

-
@ReamerPunch said:
That was fun!
Why did you grind the Wave can opener?
The Rebar is excellent. It is so comfortable to hold. I love it.

I broked it first but i decided to reuse it rather than replace it cause i needed scraper/awl in my Wave. When it broked down i didnt have Surge or other where was awl and i dont have much use for can opener since like in this test showed me these are pretty awlful to use comparing dedicated can opener. Also that desing on my Waves can opener it also act as packet opener.
Only Tools Matters
-
Well done. Its tests like these that I appreciate. The OHO blades for some can cause discomfort on tools like the Surge and Wave. The handles on the ST300 and Rebar certainly solve a lot of that. I agree the Surges blade exchanger really is a nice feature if you have a wide range of material to cut. The addition of the bit holder widens the ability to tackle a lot of different screws.
-
Well gotta do new review tomorrow since i got my Rebar today

Only Tools Matters
-
Great write up and comparison.

I actually feel the ST300 and Rebar have a edge on the Surge and Wave concerning the standard screw drivers and bit adaptability.
The Wave and Surge have their dedicated Bit Extender and that can also be combined with the 2 sleeves of bit sets. Yet the ST300 and Rebar have a bit adapter that comes with 6 bits and fits over the Phillips driver. This bit adapter can also hold all 2D bits LM have and can hold the bit extender as well for even greater length.
And as you already mentioned the Phillips and flat blades on the ST300 and Rebar will provide a good length without having to reach for bits or extender.
Another note is that Gerbers 3 D bit adapter and standard bits will fit the ST300/Rebar Phillips improving flexibility. Also, many inexpensive MTs include these 3D adapters and a 10 bit kit for under $10 making a cost effective option for increased functionality.
I wish I could add pictures, but camera is on loan and not to return for another week. Maybe someone else maybe able to add pictures.

-
@LoopCutter said:
Great write up and comparison.
I actually feel the ST300 and Rebar have a edge on the Surge and Wave concerning the standard screw drivers and bit adaptability.
The Wave and Surge have their dedicated Bit Extender and that can also be combined with the 2 sleeves of bit sets. Yet the ST300 and Rebar have a bit adapter that comes with 6 bits and fits over the Phillips driver. This bit adapter can also hold all 2D bits LM have and can hold the bit extender as well for even greater length.
And as you already mentioned the Phillips and flat blades on the ST300 and Rebar will provide a good length without having to reach for bits or extender.
Another note is that Gerbers 3 D bit adapter and standard bits will fit the ST300/Rebar Phillips improving flexibility. Also, many inexpensive MTs include these 3D adapters and a 10 bit kit for under $10 making a cost effective option for increased functionality.
I wish I could add pictures, but camera is on loan and not to return for another week. Maybe someone else maybe able to add pictures.

I have one extender what will fit on both Rebar and ST300, i cannot remeber where i aquired many years ago.
Only Tools Matters
-
@LoopCutter said:
Great write up and comparison.
I actually feel the ST300 and Rebar have a edge on the Surge and Wave concerning the standard screw drivers and bit adaptability.
The Wave and Surge have their dedicated Bit Extender and that can also be combined with the 2 sleeves of bit sets. Yet the ST300 and Rebar have a bit adapter that comes with 6 bits and fits over the Phillips driver. This bit adapter can also hold all 2D bits LM have and can hold the bit extender as well for even greater length.
And as you already mentioned the Phillips and flat blades on the ST300 and Rebar will provide a good length without having to reach for bits or extender.
Another note is that Gerbers 3 D bit adapter and standard bits will fit the ST300/Rebar Phillips improving flexibility. Also, many inexpensive MTs include these 3D adapters and a 10 bit kit for under $10 making a cost effective option for increased functionality.
I wish I could add pictures, but camera is on loan and not to return for another week. Maybe someone else maybe able to add pictures.

Hmm....that makes me think twice about modding in a 2D bit adaptor in my Rebar
Sent from my iPhone using Tapatalk
-
You know, I’ve awlways been a fan of the bits, but that is an excellent point. I hate when I have to change the batteries on something and can’t reach the screw :P
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
