Sog Powerlock 30 day challenge
-
Especially if you want to cut something
and have to sharpen the blade first
Not what you need in a rush situation ??? -
That can be really frustrating [emoji20] The serrated part of the blade is still going strong though [emoji106] I wonder if the plane edge comes in contact with the inside of the handles because it's possible to move it up and down when closed [emoji848]
Sent fra min FRD-L09 via Tapatalk
-
Interesting I wonder

-
^ +1
That seems to happen to a lot of blades...
-
RF52,
Maybe check the blade tang and see if it has enough "rise" to prevent the blade edge from hitting the inside of the handle? I haven't noted this on a PL, but I only have two newer ones, so not a big enough selection to know if this is a problem or not.

I have a BuckTool that has a tang without enough "rise" and the lock button hits the blade edge. :ahhh
So, just throwing ideas around. Hopefully that isn't the case, because the fixes are frustrating (re-edge the PE portion passed the point of contact, replace blade, send in for repair). -
@gerleatherberman said:
RF52,Maybe check the blade tang and see if it has enough "rise" to prevent the blade edge from hitting the inside of the handle? I haven't noted this on a PL, but I only have two newer ones, so not a big enough selection to know if this is a problem or not.

I have a BuckTool that has a tang without enough "rise" and the lock button hits the blade edge. :ahhh
So, just throwing ideas around. Hopefully that isn't the case, because the fixes are frustrating (re-edge the PE portion passed the point of contact, replace blade, send in for repair).It does hit the inside of the handle, I can see a small mark that is shinier than the rest of the handle and I believe it's the lock notch in the closed position that is the problem since I can move it up and down quite a bit when it's closed.
It doesn't really bother me that much as I'm concidering a mod after the challenge, just have to decide on what components I want [emoji106] It's good to have a look at it once and a while to keep it sharp though.Sent fra min FRD-L09 via Tapatalk
-
That’s a shame that it hits the lock notch
Just thinking if you could grind
the notch down a bit so that it won’t hit

-
That’s a shame that it hits the lock notch
Just thinking if you could grind
the notch down a bit so that it won’t hit

The notch on the blade is too big so doesn't help to grind of anything.
Sent fra min FRD-L09 via Tapatalk
That’s annoying

What mods are you planning on doing RF52
-
That’s a shame that it hits the lock notch
Just thinking if you could grind
the notch down a bit so that it won’t hit

The notch on the blade is too big so doesn't help to grind of anything.
Sent fra min FRD-L09 via Tapatalk
That’s annoying

What mods are you planning on doing RF52
Haven't decided just yet, but it will be some easy swaps and nothing complicated and fancy [emoji106] Maybe change the 50/50 blade for a PE blade. Have also been thinking of getting the wirestripper, but the wirecutter does a good job at stripping cables. Have to see what is easily available over here too [emoji106]
Sent fra min FRD-L09 via Tapatalk
-
That’s a shame that it hits the lock notch
Just thinking if you could grind
the notch down a bit so that it won’t hit

The notch on the blade is too big so doesn't help to grind of anything.
Sent fra min FRD-L09 via Tapatalk
That’s annoying

What mods are you planning on doing RF52
Haven't decided just yet, but it will be some easy swaps and nothing complicated and fancy [emoji106] Maybe change the 50/50 blade for a PE blade. Have also been thinking of getting the wirestripper, but the wirecutter does a good job at stripping cables. Have to see what is easily available over here too [emoji106]
Sent fra min FRD-L09 via Tapatalk
I will look forward with what you come up with

-
Day 12:
Cutter to cut the excess of some zip ties.
Phillips to change an inverter for a light fixture
Scissors to open a sugru pack to fix my backpack zipper
The Powerlock did good on all jobs [emoji16]




Sent fra min FRD-L09 via Tapatalk
-
[quote author=Wspeed link=topic=78434.msg1759958#msg1759958 date=1535477473]
That’s a shame that it hits the lock notch
Just thinking if you could grind
the notch down a bit so that it won’t hit

The notch on the blade is too big so doesn't help to grind of anything.
Sent fra min FRD-L09 via Tapatalk
That’s annoying

What mods are you planning on doing RF52
Haven't decided just yet, but it will be some easy swaps and nothing complicated and fancy [emoji106] Maybe change the 50/50 blade for a PE blade. Have also been thinking of getting the wirestripper, but the wirecutter does a good job at stripping cables. Have to see what is easily available over here too [emoji106]
Sent fra min FRD-L09 via Tapatalk
I will look forward with what you come up with

[/quote]Just don't hold your breath, I'm not known for beeing fast with my projects [emoji12]Sent fra min FRD-L09 via Tapatalk
-
Excellent work again RF52

-
[quote author=RF52 link=topic=78434.msg1759961#msg1759961 date=1535477758]
[quote author=Wspeed link=topic=78434.msg1759958#msg1759958 date=1535477473]
That’s a shame that it hits the lock notch
Just thinking if you could grind
the notch down a bit so that it won’t hit

The notch on the blade is too big so doesn't help to grind of anything.
Sent fra min FRD-L09 via Tapatalk
That’s annoying

What mods are you planning on doing RF52
Haven't decided just yet, but it will be some easy swaps and nothing complicated and fancy [emoji106] Maybe change the 50/50 blade for a PE blade. Have also been thinking of getting the wirestripper, but the wirecutter does a good job at stripping cables. Have to see what is easily available over here too [emoji106]
Sent fra min FRD-L09 via Tapatalk
I will look forward with what you come up with

[/quote]Just don't hold your breath, I'm not known for beeing fast with my projects [emoji12]Sent fra min FRD-L09 via Tapatalk
[/quote]
I know what you mean my project
list is getting longer and longer :ahhh -
Thanks [emoji16] They just seem to pile up don't they [emoji12]
Sent fra min FRD-L09 via Tapatalk
-
Great work, RF52


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

