Your favorite small sized multitool
-
@Ayik goyep said:
My favorite keychain..
That everyday iam bring to my workplace...
On power stationThat is my revision for my keychain, all stuf are handmade or DIY, except my SAK, USB and a cigarete, consists of :
- Keychain duct tape (DIY)
- USB 8 gb
- SAK
- Utility cutter razor (DIY)
- Cigarrete
- lighter (DIY)
- key chain suspension clip (DIY)
Best regrads

-
@Huntsman said:
Talking of larger SAKs - The question to which I responded was: 'What is your favourite key chain multitool?' ???- So to answer the actual question I think I will respond:
Wenger Evo 13: Blade, Scissors, openers, tp, tw, nail file - all in a very nice package - Brilliant
Wenger Evo 13 is 85 mm full sak. It is not a keychain tool.
- So to answer the actual question I think I will respond:
-
My vote goes to the Leatherman Micra. I've lost more of those than I like to think about. Oh no, now I'm thinking about it :ahhh
-
in the months (years?) since I first responded to this thread,
I've grown very fond of the Squirt S4 over the Micra

-
These days a LM Squirt P4 is my only EDC tool. It is small enough that I don't notice it in my pocket, but when I need it it's ready & waiting for whatever light duty tasks I want to do..
-
@gregozedobe said:
These days a LM Squirt P4 is my only EDC tool. It is small enough that I don't notice it in my pocket, but when I need it it's ready & waiting for whatever light duty tasks I want to do..I'm with you gregozedobe but I have to also carry my Manager. The scissors and pen are so handy.
-
I love my minichamp. It's on the keyring to my jeep, so it's usually with me. However, I think the scissors on the Schrade DL-2 are better. They're springless, they have a slimmer profile, and they're sharp as blazes. They're much better at trimming fingernails, at least. The Minichamp is no slouch, but the DL-2 scissors are just better. I do also really like the scales on the DL-2, they're really deep and glossy. With a blade, a nail file, and scissors it's like a Victorinox SD... but even smaller!
I don't really EDC my DL-2s, as I'm collecting tool and auto/moto related advertising on SD-sized knives. But if I had call to use a Victorinox SD.... I'd get a Schrade DL-2 instead.
The Texaco and Snap-On are Schrade DL-2's. The Michelin is a Victorinox SD, for size comparison
Charles.

-
Victorinox Rambler/Manager
Second place goes to the Wenger Pocket Tool Chest/Evo 88, and it would win outright if it had the Phillips combo tool and the SD file from the Rambler
-
Just curious, what do you like so much about the SD file on the Rambler?
You could probably mod the one on a PTC to be similar in shape
I'm also a big fan of the combo phillips

-
@theonew said:
Just curious, what do you like so much about the SD file on the Rambler?
You could probably mod the one on a PTC to be similar in shape
I'm also a big fan of the combo phillips

The combo tool on the PTC does the job of the SD file tip, but if you swapped the combo tool to the Phillips type, you'd need a SD tip on the file to replace that function.
-
Check this little thing out. I got two of these little guys in a big lot of multi tools. It’s branded PokeTech, is made in Taiwan, and is labeled US PAT No. Des 414092. Interesting enough, the pliers are the part that is patented. The tool load is not included in the patent.
The pliers themselves are VERY similar to victorinox 91mm pliers. Just a hair larger and a hair thinner. The tool load reminds me of Vintage Coast multi tools. The opener in particular is a Coast design. The file is heat treated and quite nice, it’s a dull finish not stainless like the rest. The main blade is sharp enough to cut paper, and the serrated blade goes through paracord quite nicely. All the drivers are decent, slightly rounded corners on some but not bad at all. Some are machined after polishing and have sharp corners. The lanyard loop is redundant but everything else is useful and works well - even the 2D Phillips driver.
The pliers take a lot more force than victorinox pliers, due to the form factor obviously. They do deflect at the tips a little easier though. The teeth are well formed and grippy enough for the size. This is a super small, and yet super useful little tool. I like it!
Charles.




-
Interesting tool. Looks like it has two bottle openers too.
-
No, just one bottle opener -- actually one combo bottle/can opener. The other small bottle opener looking thing is just a nail nick, and is on the small flat driver and lanyard loop. It's just a nail lift for the center tool, it's far, FAR too small to be a bottle opener. It's hard to get the scale of a thing in a pic, but this tool is TINY. The pliers are the same size as Victorinox 91mm pliers, so the tools are far smaller than SAK tools.
Charles.
-
@Ayik goyep said:
@Ayik goyep said:
My favorite keychain..
That everyday iam bring to my workplace...
On power stationThat is my revision for my keychain, all stuf are handmade or DIY, except my SAK, USB and a cigarete, consists of :
- Keychain duct tape (DIY)
- USB 8 gb
- SAK
- Utility cutter razor (DIY)
- Cigarrete
- lighter (DIY)
- key chain suspension clip (DIY)
Best regrads
Very good, Ayik! That SAK seems to have had lots of use.

-
Talking of larger SAKs - The question to which I responded was: 'What is your favourite key chain multitool?' ???
- So to answer the actual question I think I will respond:
Wenger Evo 13: Blade, Scissors, openers, tp, tw, nail file - all in a very nice package - Brilliant
Wenger Evo 13 is 85 mm full sak. It is not a keychain tool.
The OP question is ......... "What is your favourite small sized multitool"
And this is the question to which I responded ...... The Wenger S13
Would you disagree that it is a small sized mutitool?
However most people responded to this question with a key chain tool
I never said the S13 was a key chain tool
However .... Who is to say you could not put an 85mm SAK on a keychain
Some people do !! - So to answer the actual question I think I will respond:
-
Talking of larger SAKs - The question to which I responded was: 'What is your favourite key chain multitool?' ???
- So to answer the actual question I think I will respond:
Wenger Evo 13: Blade, Scissors, openers, tp, tw, nail file - all in a very nice package - Brilliant
Wenger Evo 13 is 85 mm full sak. It is not a keychain tool.
The OP question is ......... "What is your favourite small sized multitool"
And this is the question to which I responded ...... The Wenger S13
Would you disagree that it is a small sized mutitool?
However most people responded to this question with a key chain tool
I never said the S13 was a key chain tool
However .... Who is to say you could not put an 85mm SAK on a keychain
Some people do !!You can also attach a truck to a keychain... :D
- So to answer the actual question I think I will respond:
-
i'm in love with my swisstool spirit.

-
I know a friend who carries a Kershaw Chive on his keys. To me, I don't see the point in anything bigger than a Classic or Ladybug on someone's keys. Maybe an Executive at the biggest. I have a 4" County Comm bar, which many carry on their keys, but for me, it's separate, down with the pliers in the right front pocket.
-
@ChopperCharles said:
Check this little thing out. I got two of these little guys in a big lot of multi tools. It’s branded PokeTech, is made in Taiwan, and is labeled US PAT No. Des 414092. Interesting enough, the pliers are the part that is patented. The tool load is not included in the patent.The pliers themselves are VERY similar to victorinox 91mm pliers. Just a hair larger and a hair thinner. The tool load reminds me of Vintage Coast multi tools. The opener in particular is a Coast design. The file is heat treated and quite nice, it’s a dull finish not stainless like the rest. The main blade is sharp enough to cut paper, and the serrated blade goes through paracord quite nicely. All the drivers are decent, slightly rounded corners on some but not bad at all. Some are machined after polishing and have sharp corners. The lanyard loop is redundant but everything else is useful and works well - even the 2D Phillips driver.
The pliers take a lot more force than victorinox pliers, due to the form factor obviously. They do deflect at the tips a little easier though. The teeth are well formed and grippy enough for the size. This is a super small, and yet super useful little tool. I like it!
Charles.
Update: I found more information. The Pocket Tech (not PokeTech, apparently the single T is meant to be printed twice in literature) tool is made by, or at least imported by, Stanley. "Pocket Tech" may or may not be a stanley designation. If you search eBay for "stanley max edge mini multi tool", you'll find several examples for sale. The tool was made in the late 90s. The patent was granted in 1998, but it was obviously sold while the patent was still pending.
Mine is apparently an early version, because it does not have the "US Patent No 6038735" imprint, only the "US Pat No Des 414092". The stanley-branded models have both. Not sure what the "Des" refers to.
It was also available in a gift set with a maglite solitare.
https://www.adsources.com/brands/stanley/tapemsr1.htm
Charles.
-
Des stands for US Design Patent (see https://en.wikipedia.org/wiki/Design_patent), which is legal protection for an ornamental design of a functional item.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
