September Storm: 30 days of Waves
-

+1

I wish i mods like Sam

-
...I don't think we've seen the file blade used yet. But every other tool has been used. And it's only Day 02! :ahhh ...
Yes, it has been used ;)

How could I forget the self-magnetizing Wave?
This means we Storm Riders used and tested every single Wave tool in a single day.
I've said it before, but it's worth repeating: a multitool company would do well do gift two dozen prototypes to MTo for testing. We'd shake out the bugs within a week or two, easy.

-
proper testing by us is what is needed 
-

What an accomplishment!
That would be a great way to test products

P.S. Having a self-magnetized Wave sucks :ahhh

-
More Day 02:
I was comparing the Charge AL and the Wave+ today. I'm a bit surprised to find that the Charge is bigger in every dimension than the Wave. Not sure why this should come as news to me at this point in my life; I guess I never held two side by side before.

You guys awlready know that the tools sets are the same. Different blade steels, different handle materials, and the Wave+ has replaceable wire cutters. The pliers head are slightly differentto allow the Wave to accommodate the replaceable cutters.
With a pocket clip attached to both tools, the Charge weighs in at 248 grams on my scale, the Wave a wee bit less at 244 grams. I thought the aluminum handle scales would lighten the Charge a bit more than that. Apparently not the case.
I had a bit more fencing to put up and test the wire cutters on tie-wire and the actual fencing. The fencing is thicker and harder than the wire.
Both tools cut these materials easily. Neither tool's cutter suffered any damage.
I will say that my subjective impression was that the Wave cut the materials more easily. The cutters seem sharper. And when cutting the Wave is quieter, especially with the softer wire.

Neither set of cutters did very well cutting the piece of rebar, but you can't have everything with a pocket tool. I'll call that a tie.
However, overall, I find I favor the Wave over the Charge at the moment. The big handles on the Charge are more comfortable, for me, but I value the slimmer profile of the Wave. And, hey, it's 4 grams lighter, so even guys like NutSAK can carry it.
-
Nicely tested Nix

-
Day 2
Busy day at work today! Working on machinery which was a bit large for the Wave, but still found a few jobs for it ...
Prepared some breakfast before I started to test the effects of black oxide ingestion!!
Managed to remove a key from a shaft using the pliers.I had an annoying issue with the pliers, when using a lot of force they would go really stiff until I tapped the plier head on something solid, they would then loosen up again! I had the exact same issue with my Rebar pliers when new!




-
Nice uses!
Mine are a bit stiff, too. I know some guys will oil them and work them a lot. But I've found that with time and use they break-in just fine.
-
Good work Jaypeebee

-
Day 2 continued...
A quick bite for lunch, no ill effects yet from black oxide consumption!! I've probably eaten worse though

Needed to cut some wire but it was a bit thick and hard for the Waves cutters so just "nicked"it with the file then it broke easy enough bending it with the pliers.
Used the knife to trim some gasket away that didn't line up correctly.




-
Nice one Jaypeebee

-
I was comparing the Charge AL and the Wave+ today. I'm a bit surprised to find that the Charge is bigger in every dimension than the Wave. Not sure why this should come as news to me at this point in my life; I guess I never held two side by side before.

You guys awlready know that the tools sets are the same. Different blade steels, different handle materials, and the Wave+ has replaceable wire cutters. The pliers head are slightly differentto allow the Wave to accommodate the replaceable cutters.
With a pocket clip attached to both tools, the Charge weighs in at 248 grams on my scale, the Wave a wee bit less at 244 grams. I thought the aluminum handle scales would lighten the Charge a bit more than that. Apparently not the case.
I had a bit more fencing to put up and test the wire cutters on tie-wire and the actual fencing. The fencing is thicker and harder than the wire.
Both tools cut these materials easily. Neither tool's cutter suffered any damage.
I will say that my subjective impression was that the Wave cut the materials more easily. The cutters seem sharper. And when cutting the Wave is quieter, especially with the softer wire.

Neither set of cutters did very well cutting the piece of rebar, but you can't have everything with a pocket tool. I'll call that a tie.
However, overall, I find I favor the Wave over the Charge at the moment. The big handles on the Charge are more comfortable, for me, but I value the slimmer profile of the Wave. And, hey, it's 4 grams lighter, so even guys like NutSAK can carry it.
that was a cool comparison and write up
-
I was comparing the Charge AL and the Wave+ today. I'm a bit surprised to find that the Charge is bigger in every dimension than the Wave. Not sure why this should come as news to me at this point in my life; I guess I never held two side by side before.

You guys awlready know that the tools sets are the same. Different blade steels, different handle materials, and the Wave+ has replaceable wire cutters. The pliers head are slightly differentto allow the Wave to accommodate the replaceable cutters.
With a pocket clip attached to both tools, the Charge weighs in at 248 grams on my scale, the Wave a wee bit less at 244 grams. I thought the aluminum handle scales would lighten the Charge a bit more than that. Apparently not the case.
I had a bit more fencing to put up and test the wire cutters on tie-wire and the actual fencing. The fencing is thicker and harder than the wire.
Both tools cut these materials easily. Neither tool's cutter suffered any damage.
I will say that my subjective impression was that the Wave cut the materials more easily. The cutters seem sharper. And when cutting the Wave is quieter, especially with the softer wire.

Neither set of cutters did very well cutting the piece of rebar, but you can't have everything with a pocket tool. I'll call that a tie.
However, overall, I find I favor the Wave over the Charge at the moment. The big handles on the Charge are more comfortable, for me, but I value the slimmer profile of the Wave. And, hey, it's 4 grams lighter, so even guys like NutSAK can carry it.
Wow, thanks a million Nix for testing this.
Great comparison. I can sleep better now using Wave for the next 28 days to come
-
Mine are a bit stiff, too. I know some guys will oil them and work them a lot. But I've found that with time and use they break-in just fine.
Yeah, it's just strange why they are nice and free normally but go extremely tight when I've used quite a bit of force then won't loosen up until I give them a "tap"on something solid!
It's probably newness, like I said my Rebar pliers were exactly the same and are ok now, maybe a bit loose!! -
Day 2
Today's post is about the differences between the ReWaveR and a stock Wave. I might go into some more detail in subsequent daily posts as warranted by special uses.
First and most visible is the Rebar pliers head. Others have done this before me, the reason usually being the exchangeable cutters. Of course the Wave + has made that obsolete, but only to an extent as the Rebar pliers are manifestly more solid.
Then the PE blade, this was swapped out for a 154CM one normally found in a Charge. The same was done to the SE blade - I thought the hook blade looked cool but have yet to ascertain the utility.
Notably no longer present are the bit drivers, both large and small, and the scissors. Instead, the ReWaveR sports a fixed Phillips, an awl and a small fixed screwdriver, all out of a Rebar, duly filed down where necessary (the awl from another small Rebar screwdriver, then sharpened and drilled) to account for the more limited space available in the Wave handles and to allow the Rebar plier head to fit in.
Still present the large flat blade and the can opener.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
