Skeletool RX?
-
Kinda surprised no one has made a glass breaker bit yet

-
-
@Aloha007 said:
Kinda surprised no one has made a glass breaker bit yet
I am no expert or anything on rescue tools or breaking glass, so feel free to correct me.
But I can imagine, the "time consuming" process of swapping bits in an emergency situation would render a glass breaker kind of redundant, and I can also imagine that the bit driver wouldn't be designed to be used as a hammer tool, so it would prematurely wear the bit driver out, if not destroy it completely.
Just my 2 cents....
-
Kinda surprised no one has made a glass breaker bit yet

I guess its because many/most/all have a dedicated tool like the RESQME in their car, so people don't feel the need to have a glass breaker.
I keep a automatic center punch in my vehicle. Just figured someone who really wanted one would have attempted to make one.

-
@MMR said:
I am no expert or anything on rescue tools or breaking glass, so feel free to correct me.But I can imagine, the "time consuming" process of swapping bits in an emergency situation would render a glass breaker kind of redundant, and I can also imagine that the bit driver wouldn't be designed to be used as a hammer tool, so it would prematurely wear the bit driver out, if not destroy it completely.
Just my 2 cents....
Unless you keep the glassbreaker bit equipped when not using other bits, it's just a bad idea and won't be ready when you need it. -
Kinda surprised no one has made a glass breaker bit yet

I am no expert or anything on rescue tools or breaking glass, so feel free to correct me.
But I can imagine, the "time consuming" process of swapping bits in an emergency situation would render a glass breaker kind of redundant, and I can also imagine that the bit driver wouldn't be designed to be used as a hammer tool, so it would prematurely wear the bit driver out, if not destroy it completely.
Just my 2 cents....
Not an expert on car rescue either, but I did several lab-safety courses (fire, spills, many dangers in a lab), I also did work with firefighters (developing protocols for high risk buildings == Labs). First step is always to calm down and think, so time is rarely that critical (e.g. on a crash site, you would first secure the site before you actually start rescuing people). However, there is a great risk in dropping that tiny bit (remember you are probably close to panic and your hands are shaking), making a glass breaker bit too unreliable.
-
And from 2018 all new vehicles in the US must have laminated glass in all windows, including the doors, so the utility of a glass breaker will be becoming increasingly questionable. https://www.firerecruit.com/articles/1505250-6-tools-for-breaching-auto-glass
-
@Steinar said:
And from 2018 all new vehicles in the US must have laminated glass in all windows, including the doors, so the utility of a glass breaker will be becoming increasingly questionable. https://www.firerecruit.com/articles/1505250-6-tools-for-breaching-auto-glass
Fire-extrication blanket to cover and protect the patient during operations.
Hood release tool.
Battery cable cutter.
Hack saw and spare blades.
Heavy-duty spring window punch.
Seatbelt cutter.
ART glass removal tool.
9.5-inch grip-lock pliers.
8-inch adjustable wrench.
12-inch pry bar.
Utility knife with spare blades.
Magnetic holder to place the kit on the vehicle. -
Yes, in conjunction with other tooling. And when did a bit on a Skeletool or a Res-Q-Me (of which I own several) become comparable to a heavy duty spring punch?
Edit: My first reply was quite a lot more snarky. :P
-
@Steinar said:
And from 2018 all new vehicles in the US must have laminated glass in all windows, including the doors, so the utility of a glass breaker will be becoming increasingly questionable. https://www.firerecruit.com/articles/1505250-6-tools-for-breaching-auto-glassInteresting... then even the RESQME won't work anymore (but the Vic Rescue Tool should still be good, just use the disc saw).
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
@Steinar said:
Yes, in conjunction with other tooling. And when did a bit on a Skeletool or a Res-Q-Me (of which I own several) become comparable to a heavy duty spring punch?Edit: My first reply was quite a lot more snarky. :P
After looking at E's video I think your post was actually more accurate.
The ResQme didn't do a thing to the laminated glass.I'm now
wondering if my automatic center punch would be adequate. -
Yes, in conjunction with other tooling. And when did a bit on a Skeletool or a Res-Q-Me (of which I own several) become comparable to a heavy duty spring punch?
Edit: My first reply was quite a lot more snarky. :P
After looking at E's video I think your post was actually more accurate.
The ResQme didn't do a thing to the laminated glass.I'm now
wondering if my automatic center punch would be adequate.Check your car window, it should be labeled if it is laminated or tempered
Also, I think the firefighter carry the punch for older cars and to make an initial hole into laminated glass, so they can use the saw.
-
I'd agree the punch would be used on laminated glass as an access point for the saw. My side windows are tempered. Guess to be fully prepared one needs an assortment of breaching tools
. Which is why I have resolved for my purposes to not think I can help in all situations. I'd certainly do my best but a cell phone call to emergency services followed by my best efforts is where I land.Recently I happened upon a roll over. It was a large SUV laying on its side. There were several other vehicles who had stopped. Thankfully a fire truck with paramedic vehicle was on scene. I did wonder what help I could have offered had I been the first on scene.
Thinking about the newer side laminated glass windows. I would have attempted to breach the windows with my center punch and IF nothing happened
. I have other tools on my vehicle but I'd have to then run to get them.Very interest follow up to this thread fellas. Glad this was all brought up.
. Certainly gives us something more to consider. -
Yes, in conjunction with other tooling. And when did a bit on a Skeletool or a Res-Q-Me (of which I own several) become comparable to a heavy duty spring punch?
Edit: My first reply was quite a lot more snarky. :P
After looking at E's video I think your post was actually more accurate.
The ResQme didn't do a thing to the laminated glass.I'm now
wondering if my automatic center punch would be adequate.Check your car window, it should be labeled if it is laminated or tempered
Also, I think the firefighter carry the punch for older cars and to make an initial hole into laminated glass, so they can use the saw.
That's indeed the reason. I'm not a firefighter but in my free time I am a rescue technician and that's what I was taught. Fortunately Ive never used that particular skill, but have been taught it if you can bust the window enough to punch a saw through, then you can cut an opening through the sheet of laminated shards.
-
IIRC, up u itl this year most car windows are tempered, and most car front/back panel windows are laminated.

Also, it's important to know that to break a window with a punch one should hit the sides/corners of the window, not the center
good progress of this thread so far

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login