September Storm: 30 days of Waves
-
Day 6
Didnt really do much.. Switch in a new blade..

-
What’s the blade of Sam

-
Today I stripped and cut a ground wire
That we used for making a workbench
Anti static for when my son works on computersThe cutters are excellent no problems cutting
The wire stripper is the first time I used one
And didn’t get any result just turning the wire
But when I took it off the lock and pushed the
stripper towards the handle and then
turned the wire I got it to cut without any problemsI did try and show that in the 1st pic how I got it to work

Cool Wspeed.... yes, the wire stripper needs some practise but does a good job and is more secure to use for the wire and yourself than the blades

Btw, ground wire should be yellow/green

-
@Antti Lammi said:
Day 6/30
Again **exremely boring meeting and i cutted fingernails with my Waves scissors and pryed open few electric socket **with my HalfWaveOnly Tools Matters
[···] imagines Antti getting up from his chair during the meeting and starting to walk around the room loudly prying out electrical sockets while the person keeps talking his speech looking sideways towards such random behavior not knowing what to do ???


-
Day 6
continued on yesterday's project from the missus today after work I cut 3 pieces of 6mm MDF (not with the Wave because she didn't allow
).
But I used the Wave to smoothen the edges and corners out. The coarse side of the file worked great for it.
Then I used the bit driver to screw on the hanger I fabricated yesterday and up it went onto the wall.
She's happy with it and so am I :D



-
@MTMatt said:
Day 6
Today I stripped and cut a ground wire
That we used for making a workbench
Anti static for when my son works on computersThe cutters are excellent no problems cutting
The wire stripper is the first time I used one
And didn’t get any result just turning the wire
But when I took it off the lock and pushed the
stripper towards the handle and then
turned the wire I got it to cut without any problemsI did try and show that in the 1st pic how I got it to work

Cool Wspeed.... yes, the wire stripper needs some practise but does a good job and is more secure to use for the wire and yourself than the blades

Btw, ground wire should be yellow/green

I was meaning that we are
using the wire for a grounding wire
-
@MTMatt said:
Day 6continued on yesterday's project from the missus today after work I cut 3 pieces of 6mm MDF (not with the Wave because she didn't allow
).
But I used the Wave to smoothen the edges and corners out. The coarse side of the file worked great for it.
Then I used the bit driver to screw on the hanger I fabricated yesterday and up it went onto the wall.
She's happy with it and so am I :DNicely done Matt

Well, whaddyaknow...
Day 6, cont'd
ReWaveR taking a file to some bed frame screw hole covers that had negative lateral tolerance.
PS: I would have believed with the advent of both mobile phones and multitools we would have evolved an extra set of hands by now. Pity evolution is so painfully slow...

-
Nice work MTMatt and D_T

-
Excellent uses, gentlemen!

Day 6:
Some smurfadore' that was about 200lbs heavier than they should be sat in an antique rocking chair and blew the arm support spindle out. There is a sign in the booth about being extra careful about the antique furniture.

Had to glue it, drill it, and put a dowel in it. Used the Wave to cut the spindle off and file off the dried glue clumps before sanding it down and finishing it. Looks like new though. :)



-
-
@MTMatt said:
Day 6
continued on yesterday's project from the missus today after work I cut 3 pieces of 6mm MDF (not with the Wave because she didn't allow
).
But I used the Wave to smoothen the edges and corners out. The coarse side of the file worked great for it.
Then I used the bit driver to screw on the hanger I fabricated yesterday and up it went onto the wall.
She's happy with it and so am I :DNicely done Matt

Well, whaddyaknow...
Day 6, cont'd
ReWaveR taking a file to some bed frame screw hole covers that had negative lateral tolerance.
PS: I would have believed with the advent of both mobile phones and multitools we would have evolved an extra set of hands by now. Pity evolution is so painfully slow...
Thanks DT

"...negative lateral tolerance"
That had me thinking a tad longer that it should :DNice job.
-
@gerleatherberman said:
Excellent uses, gentlemen!
Day 6:
Some smurfadore' that was about 200lbs heavier than they should be sat in an antique rocking chair and blew the arm support spindle out. There is a sign in the booth about being extra careful about the antique furniture.

Had to glue it, drill it, and put a dowel in it. Used the Wave to cut the spindle off and file off the dried glue clumps before sanding it down and finishing it. Looks like new though. :)Excellent repair job gerleatherberman

-
good job GLBM

-
@Antti Lammi said:
Day 6/30
Again **exremely boring meeting and i cutted fingernails with my Waves scissors and pryed open few electric socket **with my HalfWaveOnly Tools Matters
[···] imagines Antti getting up from his chair during the meeting and starting to walk around the room loudly prying out electrical sockets while the person keeps talking his speech looking sideways towards such random behavior not knowing what to do ???

Lol, i was sitting luckily next to those socket and saw that those need replace, said my co-worker that i could change to when were here
Only Tools Matters
-
Day 6
Filed a burr off a hardened linear bearing shaft, no problem for the diamond file!
Cut a piece of 6mm polycarbonate sheet, very impressed with the saw, nice clean straight cut
Not so impressed with the scissors, wouldn't cut open a plastic bag, just slipped and folded over then jammed! Tried the scissors on the Charge TTi with the same result!! So tried the OG Wave which cut perfectly! Why can't they still use that type of scissors? they are far superior to the tiny things they now put on Waves and Charges!

-
Day 6 - cont'd
Various action pics in connection with assembling furniture and electrics :D



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
