Oak scale SAK mod question
-
Does anyone know if it's possible to add oak scales to a SAK mod with exposed rivets? Will the oak be strong/hard enough to stop any movement of the tools once peened?
It's a standard modern 91mm SAK I'm modding.
Cheers for any opinions.

-
@magentus said:
Does anyone know if it's possible to add oak scales to a SAK mod with exposed rivets? Will the oak be strong/hard enough to stop any movement of the tools once peened?It's a standard modern 91mm SAK I'm modding.
Cheers for any opinions.

Ideally, at least one pin needs to be peened to something more substantial than wood. If you're not using bolsters, I would suggest peening a hidden pin direct to the liners. The other three pins should then be OK left exposed and peened in the oak I reckon. However, there is still a risk of pull through if heavy twisting occurs, such as the cap lifter driver was used hard.
-
Cheers Al - yes, I was going to peen the small pin to the spacers. Maybe I'll peen both of the middle pins to the spacers and then just expose the two end ones. It's anm experiment I've been meaning to try for a while.

-
Sounds like a fun project
Glue on would be the easiest and strongest option but I do understand the appeal of exposed rivets
Can't wait to see the pics and see how it stands up to some use 
-
@magentus said:
Does anyone know if it's possible to add oak scales to a SAK mod with exposed rivets? Will the oak be strong/hard enough to stop any movement of the tools once peened?It's a standard modern 91mm SAK I'm modding.
Cheers for any opinions.

I'm going to answer yes, (and do what Al said :) )
I'm thinking that...
Knives work with stag scales and Oak is some hard stuff so my answer is yes

-
I did something similar to an Executive for my girlfriend. I don't know what wood I used other than that it was fairly hard. It has held up so far but the forces involved are bound to be different in the 91 mm scale.
I did it by gluing the scales to the liners but some creative use of pins (to keep liners and scales aligned) while drilling should leave you able to both glue the scales to the liners and have the hidden pin.
-
Looks great fortytwo

-
-
Thanks guys!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



