September Storm: 30 days of Waves
-
Day 10
Loooonngg day. :ahhh
:ahhh
Turning the Screw after hours.That is just screwed up, Douglas.

What are your thoughts on the Old vs New Waves, so far?
I have a hard time picking one that is 'better', but find each has some benefits. But, for my job, it is the New Wave. :ahhhWell you Asked, so here it is...
So far I find the Wave 2G to be a more robust tool ( I don't think I'll be breaking it any time soon). I like the bit driver concept and how solid the tool locking meathod is, but miss the dedicated drivers of the OG and the OG scissors are far better. I know there is realy not a big differance in physical size but the G2 seems much larger to me. I still like the OHO blades of the Wave on both new and old. Even after just over 2 1/3 leatherman challenges I still prefer the outside opening drivers and tools on the Swisstool and Spirit, but the outside OHO blades diamond file and width of the pliar jaw opening is a Leatherman win. Now how do we get some one to manufacture a tool with the best of both? -
Day 10
Loooonngg day. :ahhh
:ahhh
Turning the Screw after hours.That is just screwed up, Douglas.

What are your thoughts on the Old vs New Waves, so far?
I have a hard time picking one that is 'better', but find each has some benefits. But, for my job, it is the New Wave. :ahhhWell you Asked, so here it is...
So far I find the Wave 2G to be a more robust tool ( I don't think I'll be breaking it any time soon). I like the bit driver concept and how solid the tool locking meathod is, but miss the dedicated drivers of the OG and the OG scissors are far better. I know there is realy not a big differance in physical size but the G2 seems much larger to me. I still like the OHO blades of the Wave on both new and old. Even after just over 2 1/3 leatherman challenges I still prefer the outside opening drivers and tools on the Swisstool and Spirit, but the outside OHO blades diamond file and width of the pliar jaw opening is a Leatherman win. Now how do we get some one to manufacture a tool with the best of both?This sounds mighty familiar...

-
Day 11
I did a whole bunch of nothing today. It was awesome. :D
Thinking about back-filling the lettering to make it stand out.
-
@Sam Lim said:
Day 10
Loooonngg day. :ahhh
:ahhh
Turning the Screw after hours.That is just screwed up, Douglas.

What are your thoughts on the Old vs New Waves, so far?
I have a hard time picking one that is 'better', but find each has some benefits. But, for my job, it is the New Wave. :ahhhWell you Asked, so here it is...
So far I find the Wave 2G to be a more robust tool ( I don't think I'll be breaking it any time soon). I like the bit driver concept and how solid the tool locking meathod is, but miss the dedicated drivers of the OG and the OG scissors are far better. I know there is realy not a big differance in physical size but the G2 seems much larger to me. I still like the OHO blades of the Wave on both new and old. Even after just over 2 1/3 leatherman challenges I still prefer the outside opening drivers and tools on the Swisstool and Spirit, but the outside OHO blades diamond file and width of the pliar jaw opening is a Leatherman win. Now how do we get some one to manufacture a tool with the best of both?This sounds mighty familiar...

I KNOW, IKNOW!!! 

***I BLAME ***gerleatherberman
-
Yes, the dull spots in the blade will sharpen out. No problem. Blades dull faster with use, so the more you use it, the more often it will need to be sharpened. Also, the material you cut may also result in a blade becoming dull more quickly. Cardboard is notorious for causing a blade to become dull.
Give it a good sharpening and it will look great!

Thanks

What do you think about this sharpener for the wave??
I’ve never used a hand held sharpener.
But I can tell you that the 420hc steel is pretty easy to sharpen.Good luck
-
Whatever makes the blade sharp for you is what you need. :)
Day 11:
Had a Doctor's appointment, and didn't do anything useful today. But, here is the Wave in my carry today. :)

-
Yes, the dull spots in the blade will sharpen out. No problem. Blades dull faster with use, so the more you use it, the more often it will need to be sharpened. Also, the material you cut may also result in a blade becoming dull more quickly. Cardboard is notorious for causing a blade to become dull.
Give it a good sharpening and it will look great!

Thanks

What do you think about this sharpener for the wave??
I’ve never used a hand held sharpener.
But I can tell you that the 420hc steel is pretty easy to sharpen.Good luck
Thanks I will give it a try
-
@gerleatherberman said:
Whatever makes the blade sharp for you is what you need. :)Day 11:
Had a Doctor's appointment, and didn't do anything useful today. But, here is the Wave in my carry today. :)Let’s see what came out it’s mi first sharpening I’m afraid to mes it up.
Nice edc today
-
aolmos,
No need to worry. It will be fine.
Go nice and slow, take your time. Check how the edge feels and looks every so often. You will get the hang of it!

Now, the angle on the Wave's blade may be a little different from the angle on the Victorinox sharpener, so for the first time resharpening, it may take a little extra work. Not a problem.
I generally use a regular whet stone or ceramic stones. But there is no one way to sharpen a knife. If you aren't happy with the Vic sharpener, try a Spyderco Sharpmaker or a regular sharpening stone.

-
DAY 11
The Wave tightened up two loose legs on my daughters stool.
Worked great!

Sent from my iPhone using Tapatalk
-
I don’t see that new Spydie in that carry Nix

-
No need to worry. It will be fine.
Go nice and slow, take your time. Check how the edge feels and looks every so often. You will get the hang of it!

Now, the angle on the Wave's blade may be a little different from the angle on the Victorinox sharpener, so for the first time resharpening, it may take a little extra work. Not a problem.
I generally use a regular whet stone or ceramic stones. But there is no one way to sharpen a knife. If you aren't happy with the Vic sharpener, try a Spyderco Sharpmaker or a regular sharpening stone.

Thanks nix tomorrow I will give it a try sadly in my country there isn’t much option about it I went to a hunting shop they only had this Vic sharpener I’m still looking for the whetstone until then I will give it a try
-
DAY 11 Busy all day forgot post this




-
Whatever makes the blade sharp for you is what you need. :)
Day 11:
Had a Doctor's appointment, and didn't do anything useful today. But, here is the Wave in my carry today. :)Let’s see what came out it’s mi first sharpening I’m afraid to mes it up.
Nice edc today
Thank you, aolmos!

I didn't realize you were new to sharpening. I think the swipe sharpeners are o.k. for many people. I don't think it could do any irreversible damage. The Wave blade is pretty forgiving. But, definitely look around MT.o for sharpening tips. Lots of great knife sharpening threada around here. :)
-
Day 12
One other mod in the ReWaveR is the replacement of the large bit driver with a fixed Phillips from a Rebar. This adds a bit of reach, at the cost however of allowing exchangeable bits to be used only in combination with the Removable Bit Driver (with the added advantage however of allowing use of standard 1/4" bits in that case). This mod requires the removal of some material, e.g. with the file mentioned in my previous post, from the handle and nail nick area of the Phillips as the first two pics below show (in comparison with a BO Phillips in the Rebar shown).
The plier rest tabs in that handle will also need to be removed - carefully - you don't want to change the lock spring action. The last pic shows an additional indent one will need to make in the lock spring, to allow the Phillips head to come down deeply enough inside the handle (without prejudicing the Phillips by e.g. filing off a bit from the head). The small indent can be fashioned with a Dremel and cutting disc or another bit; take care not to prejudice the rivet's hold or the spring action. Just goes to show it's a tight fit - the Wave handles do not give you a lot of space to play with.
Which brings me back to something I'd forgotten to mention in my previous post - the plier rest tab in the opposite handle will also have to be removed in order to allow the small fixed driver and awl to rest deeply enough inside the handle as well. The fit, already tight with a normal Wave(+) pliers head, becomes a little bit tighter still when you elect to use a Rebar pliers head.
The Rebar pliers head, more or less about as wide as a Wave head, does have a slightly larger contour in places - more specifically the rectangular side brace areas in the stretch between and around the pivot and the cutouts for the removable cutters. These brace areas - in combination with the removable cutters - were what originally attracted me to the Rebar pliers head in the first place, even before any sign appeared of the new Plus plier heads. The new Plus plier heads for Wave and Charge instinctively look to me as if they might be a tad weak around the cutter cutouts - I'd be more than happy to be proven wrong though. Anyone have any negative experience with the Plus heads yet?




-
Nice job, D_T!

Oh, the topic of the plus plier head has been extensively mulled over. Myself also sceptical to begin with. However, looking into the common breakage locations of the Wave pliers, it is notable that the removed material (for cutters) doesn't seem to be an area of typical weakness. I'm not saying it is NOT a potentially problematic issue, but I think the design should be sufficient for a cast plier head with replaceable cutters. MTs should never be used as hard as dedicated hand tools. That is the main reason MTs suffer damage. Too many people think MT pliers will be as good as a cheap set of drop forged tool-steel pliers, and this is not the case. Some MT pliers are amazingly strong, but they're not going to be as strong as a decent set of drop forged pliers. :)
So, in short, the plus plier head should be of similar strength to the previous Wave plier head, because the common breakage occurs in an area not affected by the material removed for the cutters. I will be happy to change my position if breakage begins to occur in the areas affected by the addition of replaceable cutters.
-
@gerleatherberman said:
Nice job, D_T!
Oh, the topic of the plus plier head has been extensively mulled over. Myself also sceptical to begin with. However, looking into the common breakage locations of the Wave pliers, it is notable that the removed material (for cutters) doesn't seem to be an area of typical weakness. I'm not saying it is NOT a potentially problematic issue, but I think the design should be sufficient for a cast plier head with replaceable cutters. MTs should never be used as hard as dedicated hand tools. That is the main reason MTs suffer damage. Too many people think MT pliers will be as good as a cheap set of drop forged tool-steel pliers, and this is not the case. Some MT pliers are amazingly strong, but they're not going to be as strong as a decent set of drop forged pliers. :)
So, in short, the plus plier head should be of similar strength to the previous Wave plier head, because the common breakage occurs in an area not affected by the material removed for the cutters. I will be happy to change my position if breakage begins to occur in the areas affected by the addition of replaceable cutters.
I totally agree with u. The breakage was never at the cutter area. Its usually near to the pivot. At least I have never seen one. Though I never had to use one hard enough to break one. Unless I was feeling stupid that day and doing stupid things.
-
Hello Team
Well so am back from airplanes and a dreadfully long meeting so what better way to say hello to my favourite LM ....
One of their most important uses .

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

