September Storm: 30 days of Waves
-
@Obi1shinobee said:
DAY 12 MANGOSTEEN FRUIT


-
@Pauldmmwc said:
Hello Team
Well so am back from airplanes and a dreadfully long meeting so what better way to say hello to my favourite LM ....
One of their most important uses .

Remember to put in the day of the post

-
Awesome uses and photos, y'all!

I got good news from the orthopaedic Doctor. I can go without that wretched medical boot, but I just need to be careful with the tendon for a while.

Day 12:
And another package. Surprise. ::)I fixed the chipped blade on the Wave and it cuts like new again. 8)
I am a sucker for MTs that need love. And this X-Tract is no exception. Model 730 Red Whittaker. Excellent condition, except the blade tip is broken off. Not sure which way I am going to reshape it yet. It was cheap enough. :)



-
Good news GLBM

-
Whatever makes the blade sharp for you is what you need. :)
Day 11:
Had a Doctor's appointment, and didn't do anything useful today. But, here is the Wave in my carry today. :)Let’s see what came out it’s mi first sharpening I’m afraid to mes it up.
Nice edc today
Thank you, aolmos!

I didn't realize you were new to sharpening. I think the swipe sharpeners are o.k. for many people. I don't think it could do any irreversible damage. The Wave blade is pretty forgiving. But, definitely look around MT.o for sharpening tips. Lots of great knife sharpening threada around here. :)
Thanks i read a lot about sharpening thats why i was looking for a wethstone but without lucky
-
Day 12
Good afternoon everyone
So today i use the blade to cut zip tie from tha vic sharpening i bought to sharpen the blade from my wave
<a href="https://ibb.co/ddCMaU" target="_blank" rel="noopener noreferrer"><img src="https://preview.ibb.co/bUmgaU/IMG_2441.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Thanks everybody for the advices so i gave a try with the vic sharpenner i follow the steps
<a href="https://ibb.co/mpubaU" target="_blank" rel="noopener noreferrer"><img src="https://preview.ibb.co/mC2UvU/IMG_2443.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
and it was great it felt a lot diferent
<a href="https://ibb.co/g3XF29" target="_blank" rel="noopener noreferrer"><img src="https://preview.ibb.co/kZbxFU/IMG_2442.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
it was easy to do it, i guess it was so sharp i accidentaly cut myself
<a href="https://ibb.co/kbDxh9" target="_blank" rel="noopener noreferrer"><img src="https://preview.ibb.co/m9oV29/IMG_2444.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
For the first time i loved, i will keep searching the whetstone
-

It's fun and educational to try different sharpening techniques!

However, there is no requirement to cut yourself each time.

-
**September Storm ** :

Had to replace a button on one of my shirts. Once one button falls off, I usually re-sew all the buttons, because the others are now also suspect. And, if I sew a button on, it stays on.

This got me thinking that it would be a good idea to figure out a way to stash a sewing needle in a LM. Have to think about that a bit.
-
Day 12 of 30
These days are zooming by :ahhh Been busy today and barely remembered to take a pic ::) but I got one

<a href="https://flic.kr/p/28fZwkm" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1892/42832844290_0c7027feb9_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>2018-09-12_02-58-23 by Poncho 65, on Flickr
-
And a mighty good shot, too!

Nice work, Poncho!
-
Day 12 - WAVE had busy day at my Part Time job.
-
Repaired Foosball table, adding two figures to the BLUE team on different spindles. 2nd one required me to remove screws for the remaining two and sliding them down, then added the missing figure to end position. Four screw/nut combos totaled to returned to a full team for Blue.
-
SE used to cut down card board boxes, to fit recycle bins, now they are full and hope they will be emptied soon.
-
Used pliers to remove risistor packs on Chem controler, so it can communicate with the new Chlorinators installed last week. The Spa is not functioning yet as the filter is under construction, but pool chlorine levels have been to high since control could not tell chlorintor to cycle off.
-
Used PE blade to trim burrs from section of PVC 2' pipe cut to fit the plumbing on the Spa filter.
-
At home PE used to open package for new replacement battery to be installed in my chromebook after I post this report

After all its functions today, insisted on a relaxing pose in the tree picture. It favors outdoor lighting.


-
-
Fourteen hundred posts! :ahhh :ahhh Have we lost Sean24 and maybe italophil?
-
Thanks so much Nix and Ws

This was an excellent day again with the challenge

And I havent had time lately to see who all has been participating
Sorry zoid 
-
Day 12
Tinkering with the .45
Replaced grips and added factory rubber grips to the Llama<a href="https://flic.kr/p/NTGzo7" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1847/30777469398_59d57ab7bf_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20180912_210843
I like the factory wood grips on the Ruger Single Six. Bought in Hawaii while my dad was stationed in the Marines in the early 70s, passed to me on my 16th birthday.
<a href="https://flic.kr/p/28grC1s" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1857/42837936290_9ecba207b4_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20180912_211117
-
@gerleatherberman said:
Awesome uses and photos, y'all!
I got good news from the orthopaedic Doctor. I can go without that wretched medical boot, but I just need to be careful with the tendon for a while.

Day 12:
And another package. Surprise. ::)I fixed the chipped blade on the Wave and it cuts like new again. 8)
I am a sucker for MTs that need love. And this X-Tract is no exception. Model 730 Red Whittaker. Excellent condition, except the blade tip is broken off. Not sure which way I am going to reshape it yet. It was cheap enough. :)
GLBM, there's something here that need some love. It was relisted as there were no taker the last time.
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F132778448329 -
Thanks for the link, Sam. I am watching it now. I do have that Mac Tools Bear Jaws (welded bolster) in mint condition already, but I wouldn't mind having one to carry.

-
DAY 12
Got a couple small tasks done tonight.
Tightened up a loose knob on a nightstand.

Bent a tab back on my Golden’s crate.

No issues, Wave worked great [emoji106]
Sent from my iPhone using Tapatalk
-
Great uses today all!
This challenge really has me rethinking my normal carry (Rebar) I think I might be making a change, but I’ll save that until the challenge is over 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login