September Storm: 30 days of Waves
-
Thanks so much Nix and Ws

This was an excellent day again with the challenge

And I havent had time lately to see who all has been participating
Sorry zoid 
-
Day 12
Tinkering with the .45
Replaced grips and added factory rubber grips to the Llama<a href="https://flic.kr/p/NTGzo7" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1847/30777469398_59d57ab7bf_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20180912_210843
I like the factory wood grips on the Ruger Single Six. Bought in Hawaii while my dad was stationed in the Marines in the early 70s, passed to me on my 16th birthday.
<a href="https://flic.kr/p/28grC1s" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1857/42837936290_9ecba207b4_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20180912_211117
-
@gerleatherberman said:
Awesome uses and photos, y'all!
I got good news from the orthopaedic Doctor. I can go without that wretched medical boot, but I just need to be careful with the tendon for a while.

Day 12:
And another package. Surprise. ::)I fixed the chipped blade on the Wave and it cuts like new again. 8)
I am a sucker for MTs that need love. And this X-Tract is no exception. Model 730 Red Whittaker. Excellent condition, except the blade tip is broken off. Not sure which way I am going to reshape it yet. It was cheap enough. :)
GLBM, there's something here that need some love. It was relisted as there were no taker the last time.
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F132778448329 -
Thanks for the link, Sam. I am watching it now. I do have that Mac Tools Bear Jaws (welded bolster) in mint condition already, but I wouldn't mind having one to carry.

-
DAY 12
Got a couple small tasks done tonight.
Tightened up a loose knob on a nightstand.

Bent a tab back on my Golden’s crate.

No issues, Wave worked great [emoji106]
Sent from my iPhone using Tapatalk
-
Great uses today all!
This challenge really has me rethinking my normal carry (Rebar) I think I might be making a change, but I’ll save that until the challenge is over 
-
@gerleatherberman said:
Thanks for the link, Sam. I am watching it now. I do have that Mac Tools Bear Jaws (welded bolster) in mint condition already, but I wouldn't mind having one to carry.
I too was watching that the last time... But due to time difference.. I missed it.. So..

-
@Sam Lim said:
I too was watching that the last time... But due to time difference.. I missed it.. So..
You need that one, don't you?
I won't bid on it if you want it. Like I said, I have one, along with the 155 version Mac Tools. :) -
** Day 12 **
This morning the Wave failed a task :P The one time I use coffee creamer, the aluminum tab won’t lift. Due to the new plier design, the Wave was worthless.

Used a Powerlock to finish the task.

The scissors snipped plenty if thread and tape.
Main use was messloads of pencil sharpening :)

Keep it up, peeps

-
@Sam Lim said:
I too was watching that the last time... But due to time difference.. I missed it.. So..

You need that one, don't you?
I won't bid on it if you want it. Like I said, I have one, along with the 155 version Mac Tools. :)Stop tempting... I have the Toolzall XL. I would like to have it but not as much as need it..
tbh, I think I will not be going for it... I recently got the electrician by craftsman.. I can't say I am happy with the quality or how it have aged..And.. My turn.. Back to topic!

-
@CallsignBadger said:
** Day 12 **This morning the Wave failed a task :P The one time I use coffee creamer, the aluminum tab won’t lift. Due to the new plier design, the Wave was worthless.

Used a Powerlock to finish the task.

The scissors snipped plenty if thread and tape.
Main use was messloads of pencil sharpening :)

Keep it up, peeps

Due to the more aggressive teeth shredding up the aluminum?
-
Went Ol' School today.

-
Hello Team
A day full of admin, some more admin and then a bit more paperwork so little time for LM action pics.
This is my day 13 pic. Probably not the best buy but it was all bright and shiny and pretty and I do like the Damascus blades. One of my coloured collection.
The coating does rub off where the bits slide against each other.On the morrow then chaps !!



-
Awesome pics uploaded for Day 12/13, guys

I especially like the Damascus blade on Paul's golden Wave
Day 13
I'll just add some more prosaic ones. A few participants have remarked on the differences between the teeth on the pliers of older and newer Waves. As expected my new Wave + (in BO) has the coarser teeth and in fact the opposing teeth seem more widely apart, leaving a noticeable gap between them, except at the very tip. Also, the edges seem to be sharper than I have seen on older model Waves. This may well account for the difficulties in opening metal foil lids encountered by CallsignBadger.
I've added a pic of the Rebar pliers head on my ReWaveR, partly as a reference to my post of yesterday but also to compare with the Wave +. Not only is the Rebar head more voluminous generally (which should help overall stiffness and strength, if the metal used is the same), there also appears to be closure between almost all of the teeth along the entire length of the grip area. One would theoretically expect this to cause less of the troubles found by CallsignBadger, but I haven't tested this yet (I rarely use cream).
So at least for fine work the older G2 Wave and Rebar heads would appear to be more suitable. Anyone have any idea or experiences to share if they have encountered any advantages to the new design (except for the obvious one, for Leatherman that is, that the new ones are likely cheaper to produce >:D)?

Douglas, on your pic do I see correctly that there is a tapering gap between opposing teeth of the OG Wave plier head? I don't own one so can't verify this.


-
Day 13
:-
A few issues with it, so we'll see what the seller says.


-
RP, do you mean the hatchet or the Wave?
-
@Dutch_Tooler said:
RP, do you mean the hatchet or the Wave?I mean the hatchet.
-
Day 13
Today I was going to check the tyre pressure
on my bike so I grabbed the pressure gauge
But it has stopped working :ahhhSo I used the Wave and the small screwdriver
to remove the screws so I can see what batteries it will take
And hopefully get some new batteries todayNo problems using the small driver
But had to use the flathead as the crosshead was too small


-
More great uses, today.

-
I have the same gap on the Wave+ pliers D_T


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login