September Storm: 30 days of Waves
-
:ahhh :ahhh :ahhh
-
@Obi1shinobee said:
:ahhh :ahhh :ahhhIt’s not that bad Obi

-
Are we going to do a reflection poll afterwards like for Chuck Yeager?
This has been a great challenge so far, with many great uses

-
** Day 14 **
Got a really busy day ahead of me, so here is my daily photo


-
September Storm:

Early delivery, and just in time!
-
Day 14
Received a special package that arrived much sooner than expected. :) Thanks to Kingofswords on another thread an order for the T-shank holder. On first look, it does looks cheap. But it's actually quite sturdy and the cut out of the T shank is very precise. There's no wiggle when the blade is in place. Need to do a bit of filing at the back that meets the liner as it does not engage properly. At least its not the other way round where the liner over travel.



-
@Sam Lim said:
Day 14Received a special package that arrived much sooner than expected. :) Thanks to Kingofswords on another thread an order for the T-shank holder. On first look, it does looks cheap. But it's actually quite sturdy and the cut out of the T shank is very precise. There's no wiggle when the blade is in place. Need to do a bit of filing at the back that meets the liner as it does not engage properly. At least its not the other way round where the liner over travel.

It looks quite nice.

Could you please post more pictures of it open?
Also, does it have to replace a blade? Can it not go in place of the file? -
Here u go. U can see the cut out is so precise. From the manufacturer, u can choose a left hand lock, right hand or neutral(diy). Difference is at the slope that touches the liner. It's grounded in different direction. Just a caution.. It can only fit thinner blades though. The one they provided, my own bosch, the LM EOD saw fit without problem. I have some longer and very minutely thicker saw blades will not fit in.
Also, the material that is used i feel that it's somewhat better then the stock on the surge..




-
I chose the slot for the blade. For future tool swapping for bladeless mods..
-
Thanks so much!




I guess I'll wait until the challenge ends, see how it holds up, and make up my mind.
How much was it? -
That looks very nice Sam was it expensive

-
Credits to Kingofswords. His provided link https://item.taobao.com/item.htm?id=542944220532
It's around $17usd after conversion. This site is in Chinese and its really confusing.. Even when I can read Chinese...

-
@Sam Lim said:
Credits to Kingofswords. His provided link https://item.taobao.com/item.htm?id=542944220532It's around $17usd after conversion. This site is in Chinese and its really confusing.. Even when I can read Chinese...

Thanks Sam unfortunately I can’t read Chinese

-
@Sam Lim said:
Credits to Kingofswords. His provided link https://item.taobao.com/item.htm?id=542944220532
It's around $17usd after conversion. This site is in Chinese and its really confusing.. Even when I can read Chinese...

Thanks Sam unfortunately I can’t read Chinese

Me either :ahhh but it does look nice

-

That blade holder merits serious consideration

-
In all honesty. With a blade of this length, I think it's not quite worth the hype.. Especially when it cuts in the pull stroke. The shortness really really limits the effectiveness... Will do further testing when I get back to work on Monday.
-
Ah but then for actual use you're not in fact limited to stowable blade length...
Anyway, TGIF,


-
I haven’t used the bottle opener yet

-
Looks like I will have to get some this weekend :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login