Seeking Rebar modding advice.
-
Nice.
That adaptor wasn’t done the way I expected, so, interesting. -
@Poncho65 said:
Nice work on the modded Rebar and the bit adapter
Nice work in making it UK legal and keeping it very functional
What about the awl though
I guess that would depend on the officer 
All this time and I actually never thought about the awl even once.
I’m going to swap the awl with the can opener for now until I decided what else to do.
Thank you for mentioning that

Sent from my iPhone using Tapatalk
-
Nice work on the modded Rebar and the bit adapter
Nice work in making it UK legal and keeping it very functional
What about the awl though
I guess that would depend on the officer 
All this time and I actually never thought about the awl even once.
I’m going to swap the awl with the can opener for now until I decided what else to do.
Thank you for mentioning that

Sent from my iPhone using Tapatalk
Quote from the Irish statue of law:
http://www.irishstatutebook.ie/eli/1990/act/12/enacted/en/print.html“
PART IIIOffensive Weapons
Possession of knives and other articles.
9.—(1) Subject to subsections (2) and (3), where a person has with him in any public place any knife or any other article which has a blade or which is sharply pointed, he shall be guilty of an offence.”
I can actually see that the awl can fall into that category.
Kind of a vaguely stated law though, even ones keys or a pen can be “sharply pointed”?
Sent from my iPhone using Tapatalk
-
Well, yes, but that's the problem with many laws of this kind. UK knife laws are similarly worded, IIRC. It all comes down to the police officer's judgement. Now, I'll accept that most police officers are reasonable persons and would not say that, say, your metal Parker pen constitutes a sharp object in terms of the law. But I am sure there are police officers around that, say, don't like Mondays and allow this to impair their fair judgement in less clear-cut cases. So, even as a citizen willing to abide by the law, you can never be sure you won't be charged with an offence.
The awl is a case in point. However, so are can openers (!) especially if provided with a cutting edge and sharp tip, such as the one on the Rebar (and some modders sharpen this to make a good package opener). If you take this further the thickness/width-to-length ratio of the small Rebar screwdriver might make this "sharp". Or needlepoint plier heads such as on a Wave.

(If you found any puns, these are intended :D)
-
Point taken!
I will admit that the awl is sharply pointed, but the can opener is more round tipped.
But either way, I might have a go at rounding it off more or swap something in instead.
Haven’t decided yet [emoji846]
Sent from my iPhone using Tapatalk
-
Glad I pointed it out
as I am sure there (like here) you have both reasonable officers and those thay are a bit more gung ho :D Hate for you to lose your Rebar over a technicallity

-
@Poncho65 said:
Glad I pointed it out
as I am sure there (like here) you have both reasonable officers and those thay are a bit more gung ho :D Hate for you to lose your Rebar over a technicallity

To be honest with you, the only time I have ever had any run-ins with any police was because of speeding, every time for rolling downhill and without noticing it I was going maybe 5 Mph over the speed limit, in other words; something that could have happened to anyone.
But I have never been in any more trouble than that, or come across any police questioning / searching me for anything.With that said, I don't plan on having any conflicts or problems with the law either, so I want to take as many safety precautions as possible. i.e. this whole thread. Like discussed, you never know what type of person the officer is or what his/her mood is like at the time of confrontation.
"Better safe, than sorry" as they say.
-
I am trying to think of what else could be cool / good mod option, as an alternative to the awl, can opener.
I am leaning away from scissors, mainly just because I don't really need scissors that much, plus I have a pair of scissors in my my Victorinox SwissCard, so I wanted to hear what other kind of options there are out there?
Please share if you know of any other alternatives :)
-

One thing that comes to mind is a pry bar made from a large flat screwdriver by grinding a V-notch in it and beveling off one edge... it's still on my list as a possible mod for my Rebar. In your case you'd be able to replace the can opener with it and retain the large flat driver - i.e. you'd need one extra.
One also wonders if perhaps a package opener à la Wingman (short curved blade pointing inwardly) might escape being considered a sharp pointed object... not sure if there's enough metal to make it lockable in a Rebar, though, but maybe others have done this already.
Or an SOG V-cutter, but this might need extensive modding. I believe Obi1shinobee managed to get one in his Reblaster.
Alternatively, reconsider the scissors... these are very rarely regarded as objectionable. Wave scissors are a straight drop-in, with the thumb tab occasionally needing shortening depending on where you put it.
-
One thing that comes to mind is a pry bar made from a large flat screwdriver by grinding a V-notch in it and beveling off one edge... it's still on my list as a possible mod for my Rebar. In your case you'd be able to replace the can opener with it and retain the large flat driver - i.e. you'd need one extra.
One also wonders if perhaps a package opener à la Wingman (short curved blade pointing inwardly) might escape being considered a sharp pointed object... not sure if there's enough metal to make it lockable in a Rebar, though, but maybe others have done this already.
Or an SOG V-cutter, but this might need extensive modding. I believe Obi1shinobee managed to get one in his Reblaster.
Alternatively, reconsider the scissors... these are very rarely regarded as objectionable. Wave scissors are a straight drop-in, with the thumb tab occasionally needing shortening depending on where you put it.
Yeah I can imagine that only tools off either a Wave, Charge, Blast or similar would be a straight drop-in as they are fairly similar in size and basic way that the tools deploy + lock and stow away. Everything else, I can imagine would need some sort of modding, in one form or the other.
I am already toying around with the idea of swapping the awl from my rebar over to my charge tti, as that is my hiking / camping tool atm.
So while I have it apart; I might steal the scissors off it... ....maybe....perhaps...
...we'll see....I think I only ever used the scissors in it like 5 times........which is still 5 times more than I have ever used the can opener 
-
Speaking of SOG tools...
SOG also has this 1/4 driver (https://www.sogknives.com/type/accessories/1-4-driver.html), perfect for like sockets etc.
...this wire stripper is pretty cool looking too: https://www.sogknives.com/type/accessories/wire-stripper.htmlAnyone have any idea about how modding is required to make a SOG tool fit am LM?
Is it boring out the pivot hole and machining / grinding with laser precision? ..or is it something that can be done with like a Dremel tool and a file?
-
/post/457163
-
Thank you kind sir!

-
I would go for the 1/4 driver
It works great
-
@Dutch_Tooler said:
https://www.sogknives.com/type/accessories/1-4-driver.htmlSays they are out of stock :(
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


