September Storm: 30 days of Waves
-
@Pacu said:
The phillips on the OG reaches so much better than the bits on the newer waves. I use phillips constantly with wall boxes, every now and then flat head.I guess having bits does give you greater options but that lack of depth is always going to be there.
I agreed with you in the lack of depth I don’t use that depth much but In case if you really needed you can buy bits for Phillips and flat a little longer in leatherman page I think is for The mut and always the bit extender.
Also sometimes when the screw it’s too tight you need the right size of screwdriver otherwise you will end ruin the screw and not always can help the standard fixed screwdriver
-
The phillips on the OG reaches so much better than the bits on the newer waves. I use phillips constantly with wall boxes, every now and then flat head.
I guess having bits does give you greater options but that lack of depth is always going to be there.
I agreed with you in the lack of depth I don’t use that depth much but In case if you really needed you can buy bits for Phillips and flat a little longer in leatherman page I think is for The mut and always the bit extender.
Also sometimes when the screw it’s too tight you need the right size of screwdriver otherwise you will end ruin the screw and not always can help the standard fixed screwdriver
I agree with those bits that are exactly what is needed. I opened up an electrical screen with the exact Allen i just happened to have in my bit kit i carry in my backpack. Saved us from messing up a soft allen screw.
-
DAY 17 Forgot post this morning


-
Enjoy Obi!
Day 18
Not surprisingly, an office day today. I celebrate the slow start with some pencil sharpening.
Not surprisingly either, the ReWaveR's 154CM PE blade made short work of this. That blade stays really sharp. OK, it hasn't seen exaggerated use, but it still cuts as new with not even the slightest touch-up so far.Stay tuned for a future episode in which I entrust this task to the Wave+'s stock blade, and be amazed at the differences! Or not.

-
The phillips on the OG reaches so much better than the bits on the newer waves. I use phillips constantly with wall boxes, every now and then flat head.
I guess having bits does give you greater options but that lack of depth is always going to be there.
I agreed with you in the lack of depth I don’t use that depth much but In case if you really needed you can buy bits for Phillips and flat a little longer in leatherman page I think is for The mut and always the bit extender.
Also sometimes when the screw it’s too tight you need the right size of screwdriver otherwise you will end ruin the screw and not always can help the standard fixed screwdriver
I agree with those bits that are exactly what is needed. I opened up an electrical screen with the exact Allen i just happened to have in my bit kit i carry in my backpack. Saved us from messing up a soft allen screw.
I guess neither solution is ideal... but at least the fixed Phillips on the OG Wave (and on my ReWaveR :D) allows one to use standard 1/4" hex bits via the removable bit adapter, and that includes options for long-shank bits if (more) reach is what you're after.
The exchangeable 2D bits are a bit more of a compromise between versatility and portability on the one hand and practical useability on the other. Then again, you can still use the bit driver extender to use the above 1/4" standard bits... -
Day 18

-
Hello day 18
So I found a Micra in a drawer that I forgot was there. Very stiff to open due to gunk etc so the Wave was called to provide some family love to help opening the
small beast.
A toothbrush ( should that not be teethbrush) , hot soapy water and a bit of WD40 to finish and the baby is as good as.TTFN
PD
-
Day 18
Today I used the Wave+ with the flat bits to
remove the screw so I can fit new batteries
To my clip on LED reading lightNo problems using the flat bits




-
Great start today

-
Thanks Glockfan

-
** Day 18 **
Tightened up a drumming practice pad for ultimate drum practicing


Using the file to deburr what is soon to be my DIY suspension clip. The entire process of making has been done by the Wave.
As always, there is always a job for the blades. I honestly lose track of my blade usage because of how frequently they are used.
Keep it up, peeps!


-
Great uses guys

Sent fra min FRD-L09 via Tapatalk
-
Day 18
Some handy craft with the kids. Haven done this in a long time.. :D

-
Day 18/30
Today Wave was in use quite alot, used file to remove old glue from drawers leg knobs and used saw to shorten new leg knob to right size and bit of blade to make it fit in place. Also used Wave to open my packet where was my Gerber Center Drive what i got real bargain price 30€





Only Tools Matters
-
Uu, i founded use to Gerber pouch my Wave with extender and 2 bitkit sets fits there easily and feels like it has made those


Only Tools Matters
-
Nice pouch Antti

-
Day 18:
Opening the Package of my new red Spacepen, used the serrated blade.
-
Some very nice gear guys
Great pics and uses today as well

-
Day 18
Busy day, not much chance for photo opportunities, just a spot of scissor action earlier on!

-
@Jaypeebee said:
Day 18Busy day, not much chance for photo opportunities, just a spot of scissor action earlier on!
Breakfast time?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login