New AXEM 4.0 from Steel Life
-
Some time ago I was contacted by a multitool manufacturer in Italy that was looking for better coverage in North America. They were a company called Steel Life and they had just released a new flagship tool they called the AXEM 4.0.

You can see the AXEM 4.0 here:

In short, it is a survival card that boasts 20 different features, including:
Box Opener
Wire Stripper
Flathead Screwdriver
Survival Axe
Oxygen Wrench
Saw
Can Opener
Set of Wrenches
Spear Tip
Bottle Opener
Rope Cutter
Eyelet Screws
Double Bit Driver
What can I say? I was intrigued, especially as we don't see a lot of Italian multitools out there, and so I agreed to handle North American distribution for them through the Multitool.org Store, at least initially.

I have yet to review the product, so I can't say much about it other than I am honored to help a company try and get a foothold in the lucrative NA market, and while I wonder how tough this tool is (an axe? Really? I am looking forward to testing that!) I recall how many people and companies contributed to making a little website known as Multitool.org into something notable, and it seems like it would be rude of me not to give something back to the industry, especially when I receive a message like this one:
I'm Vincenzo Mancinelli and I'm the CEO of the Steel Life company that own the Axem4.0 - Machine for Survival trademark. I've visionated your portal http://www.multitool.org/ and I'm really impressed about the great community you created.
(It) Is a landmark for all those that are passionate about the multitools. I like it!

Since Vincenzo asked so nicely, I have decided to give them as much help as we can to get off the ground- to help launch this new product, I am offering a 15% pre-order discount on the first AXEM 4.0 Survival Tools that are sold through The Multitool.org Store when you use the code MTOAXEM. This offer is valid through to the end of September, and is a Multitool.org Store exclusive price!
Let’s all make sure we give the fine folks at Steel Life a warm Multitool.org welcome, and let’s do our part to help get them noticed!
Def
-
All I can say is it puts that pile of garbage "credit card tool" with a roughly similar load out you'll find in a dollar store or bookstore's gift section to shame. Seems every thing on this is actually usable, although as usual, the wrenches are in a weird place
What's the size--credit card, or bigger?
-
That is my understanding. I will have more info when they arrive.
Def
-
How much those cost estimate and whats shipping costs to Finland?
Only Tools Matters
-
@Antti Lammi said:
How much those cost estimate and whats shipping costs to Finland?Only Tools Matters
They are 34 Euros (roughly) and minus 15% is 5.10 so you'd be looking at 28.90 Euros and just over 7 euros for shipping to Finland.
Subject to change due to various currency conversion factors of course. :D I used XE.com for the exchange between Euros and Canadian Loonies, but I know Paypal uses their own conversion.
Def
-
@cody6268 said:
All I can say is it puts that pile of garbage "credit card tool" with a roughly similar load out you'll find in a dollar store or bookstore's gift section to shame. Seems every thing on this is actually usable, although as usual, the wrenches are in a weird placeWhat's the size--credit card, or bigger?
I have received a response regarding this from Steel Life:
You can answer that our multitool is 2,5mm of thickenss. This is a really important point. The similiar multitools that you can find right now on the market, first of all haven't all that functionalities, and most important is that they are only 0,7mm of thickenss. This different of thickenss makes our multitool much more robust and suitable for the functionality which it was engineered for. Other is the kind of steel we used. We've chosen the most suitable kind of steel for a tool like that. The final satin finish serves to make it less vulnerable to scratches.
SPECIFICATIONS
Length: 103 mm
Width: 75 mm
Thickness: 2,5 mm
Tool weight: 110gBits included: PH2
Steel used: stainless
Construction: stainless steel worked with laser cutting and CNC machines
Finish: satin steelFor those metrically challenged, that's a smidge over 4 inches long, a smidge under three inches wide and just over an eighth of an inch thick. So, a little bigger than a standard credit card size, which is good because you'll want a bit more heft if you use it as an axe.
Def
-
First, an MTO welcome to a new (to NA) vendor. I wish you good luck in your new market.
Second, a little nit picking. That 2.5mm thickness is a hair under 3/32". For those that are both metric and dimensionally challenged, that's between 1/16" and 1/8".
I have never found a credit card size tool that really fit in a wallet, and this one isn't close to fitting into a credit card slot. At best you might sandwich it in a bifold wallet, but it likely will shift around, and there are sharp corners and edges everywhere on one of these tools. I'm not sure why you would choose the CC format and then not keep to the industry size. Weight wise this comes in-between a Farmer and a Trekker both excellent EDC (although neither will fit in a wallet either).
-
@smiller43147 said:
Second, a little nit picking. That 2.5mm thickness is a hair under 3/32". For those that are both metric and dimensionally challenged, that's between 1/16" and 1/8".I see your nitpick and will offer a nitpick to your nitpick: 2.5mm is thicker than 3/32", as 3/32 is equal to 2.38mm. I mention that to not further confuse those who are already dimensionally challenged enough..

-
'Ain't Imperial units fun?

-
No. And there's a fraction too many of them for my liking.
-
I can see how you might be able to use this tool as a (really) small light duty axe with an appropriate handle.

-
Not my personal choice of tool style (I tend to go for more of the multifunction knife and pliers tool type carry), but this seems a lot more practical than many other credit card sized offerings. In this format, I think the 2.5mm thickness will add a lot more durability and usability than the typical 1mm thick "survival tools" out there. There seems to have been some thought gone into this, and nobody has mentioned yet...
... Pozidriv :ahhh :ahhh
A multitool manufacturer has recognised that more than one type of crosshead screw exists

I look forward to seeing someone put one of these through its paces.
-
@Don Pablo said:
I can see how you might be able to use this tool as a (really) small light duty axe with an appropriate handle.
... and they give you the means of acquiring that handle too. This isn't the first "pocket axe head" tool that's emerged, but the others tend to overlook the issue of where the handle is going to come from.
-
Second, a little nit picking. That 2.5mm thickness is a hair under 3/32". For those that are both metric and dimensionally challenged, that's between 1/16" and 1/8".
I see your nitpick and will offer a nitpick to your nitpick: 2.5mm is thicker than 3/32", as 3/32 is equal to 2.38mm. I mention that to not further confuse those who are already dimensionally challenged enough..

He who lives by the nitpick, dies by the nitpick.
2.5mm is indeed a hair thicker than 3/32". -
No. And there's a fraction too many of them for my liking.

:DYou will find that sentiment is a denominator of many metric-based countries.

-
@Grant Lamontagne said:
That is my understanding. I will have more info when they arrive.Def
Firstly, welcome Vincenzo and more power to you. This looks like a robust and thoughtful entry into the flat card multitool world.
Def, if you will permit me, chief...
If I am understanding this right, you've not yet had a chance to get your hands one one of these tools (unless you do have one but just havent actually reviewed one...?) and they are not yet in stock?
Do you anticipate that they will be in stock and properly reviewed before the September deal ends?
-
@smiller43147 said:
He who lives by the nitpick, dies by the nitpick.
2.5mm is indeed a hair thicker than 3/32".I was just kind of happy to see that for once it wasn't me
A nitpick actually sounds like a historical tool of some kind? A tiny tweezer? Jewelers tool? Some kind of pick maybe? 
@50ft-trad said:
... Pozidriv :ahhh :ahhhA multitool manufacturer has recognised that more than one type of crosshead screw exists

Just looking at the renders/ pictures both ends of that bit seems to be PH2 though? (Typically making a pozidrive head takes twice as many cuts or a form tool. Either way that process leaves both parallell flanks and the typical telltale tapered edges in between the main flanks. I can't see neither on either end?)
-
Im thinking that this might be expensives scraper i ever gonna buy. I might first wanna see review and actual user video before buying this.
Idea is good but those sharp edges allaround and size of it might be one of those factors it might not get popularOnly Tools Matters
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





