New AXEM 4.0 from Steel Life
-
No. And there's a fraction too many of them for my liking.

:DYou will find that sentiment is a denominator of many metric-based countries.

-
@Grant Lamontagne said:
That is my understanding. I will have more info when they arrive.Def
Firstly, welcome Vincenzo and more power to you. This looks like a robust and thoughtful entry into the flat card multitool world.
Def, if you will permit me, chief...
If I am understanding this right, you've not yet had a chance to get your hands one one of these tools (unless you do have one but just havent actually reviewed one...?) and they are not yet in stock?
Do you anticipate that they will be in stock and properly reviewed before the September deal ends?
-
@smiller43147 said:
He who lives by the nitpick, dies by the nitpick.
2.5mm is indeed a hair thicker than 3/32".I was just kind of happy to see that for once it wasn't me
A nitpick actually sounds like a historical tool of some kind? A tiny tweezer? Jewelers tool? Some kind of pick maybe? 
@50ft-trad said:
... Pozidriv :ahhh :ahhhA multitool manufacturer has recognised that more than one type of crosshead screw exists

Just looking at the renders/ pictures both ends of that bit seems to be PH2 though? (Typically making a pozidrive head takes twice as many cuts or a form tool. Either way that process leaves both parallell flanks and the typical telltale tapered edges in between the main flanks. I can't see neither on either end?)
-
Im thinking that this might be expensives scraper i ever gonna buy. I might first wanna see review and actual user video before buying this.
Idea is good but those sharp edges allaround and size of it might be one of those factors it might not get popularOnly Tools Matters
-
@Grant Lamontagne said:
That is my understanding. I will have more info when they arrive.
Def
Firstly, welcome Vincenzo and more power to you. This looks like a robust and thoughtful entry into the flat card multitool world.
Def, if you will permit me, chief...
If I am understanding this right, you've not yet had a chance to get your hands one one of these tools (unless you do have one but just havent actually reviewed one...?) and they are not yet in stock?
Do you anticipate that they will be in stock and properly reviewed before the September deal ends?
Permit you?
You have been around long enough to know I encourage you rather than permit you! :D
Full disclosure... I do not have one of these yet, and I have not handled or tested it. I have an initial order in with them, bought and paid for and should be shipped to me any time now. I may have them in hand/stock prior to the end of September, or I may not, that depends on the shipping company. I can almost guarantee that it won't be reviewed by the end of September since I usually like to actually use a tool before writing a review rather than that silly unboxing smurf you see everywhere nowadays. This is largely the point of the introductory price- since folks are taking a risk buying an unknown tool, there's a small compensation.
I may consider extending the introductory price, but first I need to see what taxes, import charges and other bullsmurf I am going to have to deal with. There's a good chance that between all of that and the shipping costs that I will end up losing money at that price, but I feel like it's worth the risk. :D
@Antti Lammi said:
Im thinking that this might be expensives scraper i ever gonna buy. I might first wanna see review and actual user video before buying this.
Idea is good but those sharp edges allaround and size of it might be one of those factors it might not get popularOnly Tools Matters
As you know, this is my concern as well with tools that have this form factor. Judging by how many are still produced like that, it seems that you and I are in the minority though! :ahhh
Still, this is a survival oriented tool, and I think we need to take that into consideration as well. If it gets me out of a dangerous situation alive, I am willing to risk a few scratches to do what needs to be done. I think if this were an EDC oriented tool, then yes, I may be a bit more concerned about cutting open my hands every time I tried opening a bottle or tightening a screw.
Def
-
@Grant Lamontagne said:
@Grant Lamontagne said:
That is my understanding. I will have more info when they arrive.
Def
Firstly, welcome Vincenzo and more power to you. This looks like a robust and thoughtful entry into the flat card multitool world.
Def, if you will permit me, chief...
If I am understanding this right, you've not yet had a chance to get your hands one one of these tools (unless you do have one but just havent actually reviewed one...?) and they are not yet in stock?
Do you anticipate that they will be in stock and properly reviewed before the September deal ends?
Permit you?
You have been around long enough to know I encourage you rather than permit you! :D
Full disclosure... I do not have one of these yet, and I have not handled or tested it. I have an initial order in with them, bought and paid for and should be shipped to me any time now. I may have them in hand/stock prior to the end of September, or I may not, that depends on the shipping company. I can almost guarantee that it won't be reviewed by the end of September since I usually like to actually use a tool before writing a review rather than that silly unboxing smurf you see everywhere nowadays. This is largely the point of the introductory price- since folks are taking a risk buying an unknown tool, there's a small compensation.
I may consider extending the introductory price, but first I need to see what taxes, import charges and other bullsmurf I am going to have to deal with. There's a good chance that between all of that and the shipping costs that I will end up losing money at that price, but I feel like it's worth the risk. :D
@Antti Lammi said:
Im thinking that this might be expensives scraper i ever gonna buy. I might first wanna see review and actual user video before buying this.
Idea is good but those sharp edges allaround and size of it might be one of those factors it might not get popularOnly Tools Matters
As you know, this is my concern as well with tools that have this form factor. Judging by how many are still produced like that, it seems that you and I are in the minority though! :ahhh
Still, this is a survival oriented tool, and I think we need to take that into consideration as well. If it gets me out of a dangerous situation alive, I am willing to risk a few scratches to do what needs to be done. I think if this were an EDC oriented tool, then yes, I may be a bit more concerned about cutting open my hands every time I tried opening a bottle or tightening a screw.
Def
Well it seems gotta take risk to buy it and try to see how usefull or useless this tool gonna be. I like tho those ideas on tool but i need to find way to carry this tool without making extra scratches but still fast acces to it when needed.
Only Tools Matters
-
See, now this is what I love about dealing with Europeans- because of the time differences they have answered questions before I even roll out of bed in the morning! :D
It seems Vincenzo is checking in on us and he has already provided some in use photos and videos that I hadn't seen yet when I made my comments above. That's what I get for checking the forum before I check my email I guess!

Here are the photos he has sent:



And here are the videos. I haven't watched them myself yet, I wanted to get them posted ASAP.
1- https://www.youtube.com/watch?v=TaCayzOeKHQ
2- https://www.youtube.com/watch?v=sCh-NcyPjqI
3- https://www.youtube.com/watch?v=j_fL1GDtCIwDef
-
Well i made my order on that tool.
Only Tools Matters
-
Now i looked those videos, it seems that tool is way larger than credit card or that man has small hands.
Only Tools Matters
-
Posted by Grant earlier:
You can answer that our multitool is 2,5mm of thickenss. This is a really important point. The similiar multitools that you can find right now on the market, first of all haven't all that functionalities, and most important is that they are only 0,7mm of thickenss. This different of thickenss makes our multitool much more robust and suitable for the functionality which it was engineered for. Other is the kind of steel we used. We've chosen the most suitable kind of steel for a tool like that. The final satin finish serves to make it less vulnerable to scratches.
SPECIFICATIONS
Length: 103 mm
Width: 75 mm
Thickness: 2,5 mm
Tool weight: 110gBits included: PH2
Steel used: stainless
Construction: stainless steel worked with laser cutting and CNC machines
Finish: satin steelSo 10.3 cm by 7.5 cm.
-
Yes, if you look at the dimensions posted above you will see that it is much larger than a credit card. I think that's a good thing, as I find the only thing credit card sized tools are good for is destroying your wallet.

It is the same form factor as a credit card tool, but made big enough to be useful. The top video showing the axe being used I think shows it is more effective than I thought it might be. I think I am really looking forward to testing these now. :D
Def
-
It just looks so huge but gonna see myself soon as i get tool here and in my hands
Only Tools Matters
-
Looks good but I don’t think
that I would have a use for it
but for survival it could be handy
It will be interesting to see what you think of it Grant
when you get them and can test one
-
I dont really need that bit its my first that kind of tool so i dunno what to expect from tools like this. My only concern now is where to keep it so that i dont cut or stab myself with it. I hope it has uber cool package.
Only Tools Matters
-
A leather sleeve would be a nice touch
So it can be carried or stored
-
Here's a video with the features and measurements:
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





