September Storm: 30 days of Waves
-
Cool shots, guys!

-
September Storm :

This shot was taken up on a local mountain. In Colorado it would be called a hill, in Scotland it would qualify as a Munro, but here it gets the title of mountain.
I did a lot of hiking today, probably 9 miles or more, with 2,800' of elevation gain. The Wave was carried clipped into my pocket, but I also had a very sturdy lanyard keeping it clipped to my belt. No issues, but no uses either....
....until I got home and had to make supper for Mrs Nix.

A few gratuitous photos from the hike:
Spoiler:
My phone got carried in my backpack, wrapped up in a zip-lock bag. There were scattered showers, and I wanted to keep the phone dry. When things brightened up, I snapped a couple of random shots:
I hiked up the North side of the mountain on the far right in the shot below. That is where my Day 20 shot (above) was taken. Then I came down the South side and hiked over to another mountain where I snapped this shot looking backward:

You can see a rain cloud passing by. I was a little wet and chilly most of the day, but I'd rather be a bit cool than be too hot!
The trail going up the next mountain:

This trail was very nice and wound through some thick pine woods with a mossy floor. Really nice and cool, but it was a little rainy, so the phone stayed in the pack.
When I got to the top of the second mountain, it was clear that the trail went on to yet more peaks to explore, but it was getting late and I had to get home to make supper for Mrs Nix...maybe another day and another hike......

-
Day Twenty
More than half way in and I'm still not sold on these new plier heads.
<a href="https://flic.kr/p/N5S31Q" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1837/30247439688_ff41242668_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20180818_125048
I tried to grab a nylon string in a wall and was repeatedly denied by my Wave +. String kept slipping in the teeth.
-
Day 20
Using that wave to make lunch delicious burgers.

And right now working late

-
Day 20 - Had to repair the grate on a suet feeder. I think a raccoon attempted to pull it apart for a fatty snack.

-
DAY 20
Wave’s bottle opener worked great after a long day.

Sent from my iPhone using Tapatalk
-
More than half way in and I'm still not sold on these new plier heads.
I tried to grab a nylon string in a wall and was repeatedly denied by my Wave +. String kept slipping in the teeth.
You know, that is a good point to bring up. I mildly chipped the plier tips on my Wave(tried pulling a broken carbide drill bit out of a piece of iron) and it has been frustrating having only half of the tiny meeting-surface on the newer pliers left to pick at thin stuff. I am on the wall about whether I should file the tips down or leave it be. I haven't found anything about the 'newer' coarse style pliers being able to accommodate the tips being ground.

-
Day 20. New Sparring Helmet woot




-
Day Twenty
More than half way in and I'm still not sold on these new plier heads.
I tried to grab a nylon string in a wall and was repeatedly denied by my Wave +. String kept slipping in the teeth.
You know, that is a good point to bring up. I mildly chipped the plier tips on my Wave(tried pulling a broken carbide drill bit out of a piece of iron) and it has been frustrating having only half of the tiny meeting-surface on the newer pliers left to pick at thin stuff. I am on the wall about whether I should file the tips down or leave it be. I haven't found anything about the 'newer' coarse style pliers being able to accommodate the tips being ground.

Good question... however, without having any positive proof of this, I'd *expect *LM to avoid building in multiple static determination by letting the maximum pliers pivot closure position correspond exactly to the position at which the tips meet. Avoiding this situation would be best engineering practice - if only to avoid that small tolerance shifts would make the tips unusable for lack of closure. As a result, I expect there to be some safety margin, i.e. the tips will close before the pivot, thus in theory allowing some minor grinding down of the tips. However, it's anybody's guess (except LM's :D) how much - in fractions of degrees, probably - because on the other hand you don't want to weaken the pivot by taking away excess material for more closure, is my intuitive thinking
.In other words: anybody got a spare Plus pliers head lying about? sound of the grinding wheel spinning up
-
I love opening packages !
And DT, there is a russian on EBay who sells plus plier heads... i have got one, want to upgrade my wave too. Was hoping this weekend but too busy i am affraid.
Day 20:
Busy day for me yesterday, worked late but used wave a lot for opening packages and instelling stuff, mainly serrated blade and Philips no2 was used form the bit kitDid manage to make a pic of one of the boxes opened with some goodies for my HT and other Ham stuff


-

This shot was taken up on a local mountain. In Colorado it would be called a hill, in Scotland it would qualify as a Munro, but here it gets the title of mountain.
I did a lot of hiking today, probably 9 miles or more, with 2,800' of elevation gain. The Wave was carried clipped into my pocket, but I also had a very sturdy lanyard keeping it clipped to my belt. No issues, but no uses either....
....until I got home and had to make supper for Mrs Nix.

A few gratuitous photos from the hike:
Spoiler:
My phone got carried in my backpack, wrapped up in a zip-lock bag. There were scattered showers, and I wanted to keep the phone dry. When things brightened up, I snapped a couple of random shots:
I hiked up the North side of the mountain on the far right in the shot below. That is where my Day 20 shot (above) was taken. Then I came down the South side and hiked over to another mountain where I snapped this shot looking backward:

You can see a rain cloud passing by. I was a little wet and chilly most of the day, but I'd rather be a bit cool than be too hot!
The trail going up the next mountain:

This trail was very nice and wound through some thick pine woods with a mossy floor. Really nice and cool, but it was a little rainy, so the phone stayed in the pack.
When I got to the top of the second mountain, it was clear that the trail went on to yet more peaks to explore, but it was getting late and I had to get home to make supper for Mrs Nix...maybe another day and another hike......

Beautiful pictures Nix

-
Here is my day 21.
Bit hard to sort the glasses if you cannot see what you are doing but they are all good now.For Ductchtooler, I had the fortune/misfortune to find the Texas Toolcrafters site a while ago so my coloured ones are their work. No original colours for the wave except BO and SS. Now if you are talking Micras well then that is another story.
Fortunately/unfortunately TTC seem to be closed so my bank account and other half are lest stressed about tool additions .Thanks Gang
On the morrow then !!!!!!! -
Thanks Paul

Pity TTC are no longer around (even if only few of their products ever made it across the pond).
-
Day 21
Chapstick containers are awesome. 14 bits in such a tiny package.

I prefer transparent ones, but as long as the bits fit inside I'm good.

-

Those are 4mm bits, right? Do you have an adapter for the LM 2D driver? -
@Dutch_Tooler said:

Those are 4mm bits, right? Do you have an adapter for the LM 2D driver?Yup, 4mm bits. Fourteen of them!

An adapter would be nice. I have those pen-screwdrivers that store bits inside of them.
Wiha sells a 1/4" bit, with a 4mm bit slot on the other side, but nobody sends it here. -
That's a slick way to carry those bits, RP.

-
Excellent pics and uses everyone

-
And what a challenge it has been.Only 10 days to go? Man, time flies when you're surfing the Wave.....
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login