September Storm: 30 days of Waves
-
Day 22. As I don't expect any actual use, today's weekend contribution is in the form of a quiz. There is a short story, followed by a question. I don't know the answer to the question myself, as I lack what is probably even the most basic understanding of botany. Multitools do play a role, if minor.
Captain's Log, Stardate 3087.1. Commander Spock's landing party have beamed down to the planet Perlak for a quick survey.
"Spock to Enterprise."
"What is it, Mr. Spock? Found anything?"
An eyebrow can almost be felt raising. "Yes, Captain, a great deal. Among the many forms of vegetation encountered, which would appear to be familiar to most Earth-dwellers, I have found one unusual, and somewhat elusive, form. The tricorder appears to have difficulty scanning it. It seems to be emanating strong subspace distortions in its immediate vicinity. This is also affecting communications, but besides voice link I appear to have just about enough bandwidth for one still picture, transmitting now. I have placed my ReWaveR next to it to allow size comparison."
"Thanks Spock, the picture is building up. Ahh - yes - I think I recognise it from data files on past and now extinct Earth vegetation. Beats me how it's called, though. It's some form of mushroom. Some were edible, in fact, although there used to be many non-edible, even poisonous varieties that looked almost exactly like edible ones. Where did you find it?"
"Captain, it is located on a patch of lawn between what looks like ancient storage platforms for ground vehicles, next to what must have once been a busy road. We have located the remains of such vehicles in the vicinity. These are decayed almost beyond recognition, but would appear to have been propelled by a primitive form of energy conversion involving internal combustion of liquid distillates of fossil fuel. Permission to bring it up to Enterprise as a sample?"
"Nah, best leave it alone then Spock. Carry on. Kirk out."
And here is the quiz question. Was Kirk right or wrong? Would it have been safe to consume the mushroom?
In any case this would have been an easy task for the ReWaveR's main PE blade.

-
Day Twenty
More than half way in and I'm still not sold on these new plier heads.
I tried to grab a nylon string in a wall and was repeatedly denied by my Wave +. String kept slipping in the teeth.
You know, that is a good point to bring up. I mildly chipped the plier tips on my Wave(tried pulling a broken carbide drill bit out of a piece of iron) and it has been frustrating having only half of the tiny meeting-surface on the newer pliers left to pick at thin stuff. I am on the wall about whether I should file the tips down or leave it be. I haven't found anything about the 'newer' coarse style pliers being able to accommodate the tips being ground.

Good question... however, without having any positive proof of this, I'd *expect *LM to avoid building in multiple static determination by letting the maximum pliers pivot closure position correspond exactly to the position at which the tips meet. Avoiding this situation would be best engineering practice - if only to avoid that small tolerance shifts would make the tips unusable for lack of closure. As a result, I expect there to be some safety margin, i.e. the tips will close before the pivot, thus in theory allowing some minor grinding down of the tips. However, it's anybody's guess (except LM's :D) how much - in fractions of degrees, probably - because on the other hand you don't want to weaken the pivot by taking away excess material for more closure, is my intuitive thinking
.In other words: anybody got a spare Plus pliers head lying about? sound of the grinding wheel spinning up
Yeah I think the gap in the electrical crimper is their safety margin.
Here is an old pic of Rebar pliers, the tips can be taken back a fair way with no problem.
-
I think the blades would catch on the other tools.... File and saw! There's not much gap!!

-
not much of a gap 
-
Day 22
Today I didn’t think I was going to need the Wave+
but when I tried to remove the hose connector
from the tap after the summer use it was stuck
so used the pliers to undo the connectorNo real problem but the pliers only just fitted
which made holding the Wave+ a bit of a challenge


-
Good job Speedy

I have the same Swarfega too
Sent fra min FRD-L09 via Tapatalk
-
Thanks RF52

Excellent stuff Swarfega

-
True, but bear in mind the arm with respect to the fulcrum (pivot axis) Taking say 0.3 mm off each of the inner plier surfaces at the very tip will bring the tips closer by 0.6 mm which at the level of where the blades would close in on the saw and file translates to roughly 0.2 mm...
-
not much of a gap 
True, but bear in mind the arm with respect to the fulcrum (pivot axis) Taking say 0.3 mm off each of the inner plier surfaces at the very tip will bring the tips closer by 0.6 mm which at the level of where the blades would close in on the saw and file translates to roughly 0.2 mm...
That’s without putting force on the handles
When I grip the pliers by the Handles and
grip it hard the blade and file touch
and the same with the blade and saw
-

Honestly, how often do you apply full force on entirely closed pliers?
I've hone ahead and ground off just a touch off the inner, facing surfaces at the very tip. Before and after pic respectively, below. More teeth close on their opposite number now.


-
Nice one D_T

The gap on the pliers is much better
Did you grind the tip of the pliers as well
-
I grip MTs similar to a stress ball sometimes when they are open with a good deal of force but in actual use I usually don't grip things in full force
Nice job with the tip grinding DT 
Great uses and pics everyone

-
Honestly, how often do you apply full force on entirely closed pliers?
Yes not often

-
Post above edited to clarify that I just ground off a tiny bit of the inner, facing surfaces at the very tips. Nothing off the length of the tips.
-
Thanks D_T I thought you did

-
-
There should be some weird-ish technical reason why LM choose to build their recent pliers tip in such a way.. Maybe someone write in to ask them about it?

One reason I can think of is to prevent slippage when u are pulling on something?
-
No idea

-
I get the feeling it might be a cost-saving measure. Just skipping the fine-tuning... There is no rational reason why at least the gripping surface's outer contour (i.e. not counting indents) should not be perfectly plane. Too much risk of damaging whatever you're gripping if it weren't... IMHO of course.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


