spirit/swisstool rachet?
-
The little ratchet itself is exquisite. It feels strong...I would wager that a person would strip out the screw or round off the driver bit before ever damaging the ratchet itself.
Bits are retained by a circular clip, no magnets. To tighten a screw, simply insert the hex bit in from the opposite side that you would use to loosen a screw.
Not so good: hex (allen) bits and torx bits stay in the screw nicely by themselves when tightening or loosening screws. However, phillips bits try to "push out" of the screw. It is difficult to keep enough pressure on the backside of a phillips bit to prevent it from pushing out. Even moderately tight phillips screws are a problem that way. (hope my description makes sense)

-
The opposite end of the ratchet has a hex driver too. It is great for reaching deep down into a recess to get at a screw.
My bit kit came with 6 standard 1/4" bits, with spaces for 4 more of my own choosing. A nice compact little package all-in-all.
Bob

-
@J-sews said:
The opposite end of the ratchet has a hex driver too. It is great for reaching deep down into a recess to get at a screw.My bit kit came with 6 standard 1/4" bits, with spaces for 4 more of my own choosing. A nice compact little package all-in-all.
Bob
Ok i,m sold ;) ;D
i,ll try and get one in july (payday
)thanks for your help in making me part with my hard earned cash ;D
-
The only limitation I see is in the length of the ratchet handle. The ratchet head seems able to handle anything but you are still a bit limited by having enough leverage and hand purchase on the small handle. But then, if you have a "big" job I would use a regular ratchet anyway.
-
@felinevet said:
The only limitation I see is in the length of the ratchet handle. The ratchet head seems able to handle anything but you are still a bit limited by having enough leverage and hand purchase on the small handle. But then, if you have a "big" job I would use a regular ratchet anyway.thats true, but then like a good sak, your more likely to have that on you rather than you regular big,un ;)
-
Recently I've been seeing photos of the Victorinox "plus" package that shows a cute little extension for the ratchet. But mine didn't come with one. :(
I wonder if it is available as a seperate item?

-
in germany it is and it rides in your sheath's corkscrew place which is why i haven't gotten one.
-
@HighlandPark said:
in germany it is and it rides in your sheath's corkscrew place which is why i haven't gotten one.:D
Good to see you have your priorities straight man! -
-
@felinevet said:
Yes it is available separately and I have them on backorder.Thanks Tim! (So I assume you can get the whole ratchet & bit kit too?)
-
Yes it is available separately and I have them on backorder.
Thanks Tim! (So I assume you can get the whole ratchet & bit kit too?)
Yep, I have those in stock for $27.50 shipped.
-
Picked up a neat little accessory at the hardware store today. A small set of sockets in a plastic holder, and a 1/4 hex -to- 1/4 square drive adapter bit. I'll stow it all in my seperate tool pouch.
Now I can deal with nuts and bolts! :)


-
Where did you get it, and how much did you pay? Looks like what I am searching for...
-
Mussssttt have onnnnne yessss, my precioussss! :D
That looks really cool! I bet that would be handy for many multis!
What size range are the sockets?
Def
-
The sockets and adapter are a no-brand made-in-Taiwan set. They came with a ratcheting screwdriver and a bunch of hex driver bits, all packaged up together for $14.99
A set of inch sockets 3/16" to 1/2" and a set of metric sockets 5mm to 13mm were included.
-
Just to clarify something, items like this:
Just have a bit extender dont they? No ratchet, because I always assumed that was the ratchet. Is there any Swisstool package that comes with the ratchet and bit-kit? It seems to be all Spirits on Ebay that have them.
-
The SwissTool CS Plus had the wrench and bit kit, and we speculated that it was just a matter of time before a ratchet version of the CS Plus was offered, but so far, no joy.
Try contacting Tim at felinevet@sosakonline.com as he may be able to help you get the tools you want.
Def
-
How do these accessories (wrench, ratchet) attach to the multitool itself? Are there any pics?
-
@carl said:
How do these accessories (wrench, ratchet) attach to the multitool itself? Are there any pics?The wrench and ratchet don't actually attach to the Swisstool or the Spirit. They are independant from the main tool but can be stored in the same sheath.
I sadly don't have any pics as I don't have one myself, but I am sure someone else will be along soon with some.
-
Actually Bob (J-Sews) has posted a few pics on the first page of this thread which show it quite clearly.
Benner
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login