I've been possessed............
-
@Micky d said:
Just hope you don't have to turn any Phillips, I had trouble assemble a BBQ with spirit because the driver slips so much.
See I can never understand why people don't just take a sharpening stone and square off the drivers ??? I do that with all mine, and it takes less than 5 mins ::)
That's a good point but I suppose the response is, why should you have to :-\
Don't get me wrong, I'm a real magpie but there's a place where shiny should stop :D
Neil
-
@Micky d said:
Just hope you don't have to turn any Phillips, I had trouble assemble a BBQ with spirit because the driver slips so much.
See I can never understand why people don't just take a sharpening stone and square off the drivers ??? I do that with all mine, and it takes less than 5 mins ::)
That's a good point but I suppose the response is, why should you have to :-\
Don't get me wrong, I'm a real magpie but there's a place where shiny should stop :D
Neil
Well my point is people are forever modding there LM's to make them more functional, and nothings even mentioned, whereas the Vic/Wenger drivers are forever being slated, but people won't even attemp to rectify it with 5 mins work ::)
-
@Micky d said:
@Micky d said:
Just hope you don't have to turn any Phillips, I had trouble assemble a BBQ with spirit because the driver slips so much.
See I can never understand why people don't just take a sharpening stone and square off the drivers ??? I do that with all mine, and it takes less than 5 mins ::)
That's a good point but I suppose the response is, why should you have to :-\
Don't get me wrong, I'm a real magpie but there's a place where shiny should stop :D
Neil
Well my point is people are forever modding there LM's to make them more functional, and nothings even mentioned, whereas the Vic/Wenger drivers are forever being slated, but people won't even attemp to rectify it with 5 mins work ::)
True enough, but we don't want to admit it. That would take away one of our few hacks in the Vic -versus- Leatherman debates. :D
-
@Micky d said:
@Micky d said:
[quote author=jzmtl link=topic=9650.msg178068#msg178068 date=1236116992]
Just hope you don't have to turn any Phillips, I had trouble assemble a BBQ with spirit because the driver slips so much.See I can never understand why people don't just take a sharpening stone and square off the drivers ??? I do that with all mine, and it takes less than 5 mins ::)
That's a good point but I suppose the response is, why should you have to :-\
Don't get me wrong, I'm a real magpie but there's a place where shiny should stop :D
Neil
Well my point is people are forever modding there LM's to make them more functional, and nothings even mentioned, whereas the Vic/Wenger drivers are forever being slated, but people won't even attemp to rectify it with 5 mins work ::)
True enough, but we don't want to admit it. That would take away one of our few hacks in the Vic -versus- Leatherman debates. :D
[/quote]I figured as much :D -
@Micky d said:
@Micky d said:
[quote author=Micky d link=topic=9650.msg178095#msg178095 date=1236119990]
[quote author=jzmtl link=topic=9650.msg178068#msg178068 date=1236116992]
Just hope you don't have to turn any Phillips, I had trouble assemble a BBQ with spirit because the driver slips so much.See I can never understand why people don't just take a sharpening stone and square off the drivers ??? I do that with all mine, and it takes less than 5 mins ::)
That's a good point but I suppose the response is, why should you have to :-\
Don't get me wrong, I'm a real magpie but there's a place where shiny should stop :D
Neil
Well my point is people are forever modding there LM's to make them more functional, and nothings even mentioned, whereas the Vic/Wenger drivers are forever being slated, but people won't even attemp to rectify it with 5 mins work ::)
True enough, but we don't want to admit it. That would take away one of our few hacks in the Vic -versus- Leatherman debates. :D
[/quote]I figured as much :D
[/quote]So you'll understand mate why I need to delete the previous few posts? Wouldn't want the word getting out amongst the minions. >:D
-
@Micky d said:
@Micky d said:
[quote author=NKB link=topic=9650.msg178101#msg178101 date=1236120355]
[quote author=Micky d link=topic=9650.msg178095#msg178095 date=1236119990]
[quote author=jzmtl link=topic=9650.msg178068#msg178068 date=1236116992]
Just hope you don't have to turn any Phillips, I had trouble assemble a BBQ with spirit because the driver slips so much.See I can never understand why people don't just take a sharpening stone and square off the drivers ??? I do that with all mine, and it takes less than 5 mins ::)
That's a good point but I suppose the response is, why should you have to :-\
Don't get me wrong, I'm a real magpie but there's a place where shiny should stop :D
Neil
Well my point is people are forever modding there LM's to make them more functional, and nothings even mentioned, whereas the Vic/Wenger drivers are forever being slated, but people won't even attemp to rectify it with 5 mins work ::)
True enough, but we don't want to admit it. That would take away one of our few hacks in the Vic -versus- Leatherman debates. :D
[/quote]I figured as much :D
[/quote]So you'll understand mate why I need to delete the previous few posts? Wouldn't want the word getting out amongst the minions. >:D
[/quote] :D :DDon't worry I know I'm an army of 1 on that front anyway :D
-
@NKB said:
That's a good point but I suppose the response is, why should you have to :-\'Cause you also have to break in the blades or work your plier head etc. in your brand-new Surge/Charge/whatever, usually "while watching a film on TV"... ::) The funny thing is that you could amend for the biggest sin of Vic MTs "while watching a couple of commercials on TV", and just sit back and watch the rest of the movie without having to blindly open and close something pinchy/pokey/sharp... :)
PS: 4 new posts in the time it took me to write the above couple of sentences? Dudes, you're fast... :)
-
@Micky d said:
Just hope you don't have to turn any Phillips, I had trouble assemble a BBQ with spirit because the driver slips so much.
See I can never understand why people don't just take a sharpening stone and square off the drivers ??? I do that with all mine, and it takes less than 5 mins ::)
How do you square off a phillips driver? ???
-
I agree, sanding the Vic heads to be more like a LM driver would improve them no end ;)
-
Actually I am a staunch defendant of Leatherman's dedicated drivers.
I'll pretend not to notice this talk of modding Spirits.
-
@Micky d said:
Just hope you don't have to turn any Phillips, I had trouble assemble a BBQ with spirit because the driver slips so much.
See I can never understand why people don't just take a sharpening stone and square off the drivers ??? I do that with all mine, and it takes less than 5 mins ::)
How do you square off a phillips driver? ???
he means take the shiny off :D
-
I find the Spirits phillips a little smaller and slightly better fit then the Swisstool , although its not much better .If my Swisstools start to slip and get rounded then I do what Micky does and square them up with a stone .
Spirit on the right

Dunc
-
That's a good point but I suppose the response is, why should you have to :-\
'Cause you also have to break in the blades or work your plier head etc. in your brand-new Surge/Charge/whatever, usually "while watching a film on TV"... ::) The funny thing is that you could amend for the biggest sin of Vic MTs "while watching a couple of commercials on TV", and just sit back and watch the rest of the movie without having to blindly open and close something pinchy/pokey/sharp... :)
PS: 4 new posts in the time it took me to write the above couple of sentences? Dudes, you're fast... :)
Thank you

-
Funny you said that, my spirit didn't need break in, the plier head was kinda loose and wobbly from the start. :P
-
And there was me thinking this thread was more about how the Spirit compares to a Swisstool rather then Leathermans ::)
I'll do a Sprit V's Blast comparison test soon ;)
Any way does anyone know anything about the model issued to the Dutch army ? I have a feeling thats how the 'S' mosel came about

Dunc
-
Any thoughts yet Dunc ?

-
@Magic Bus said:
Any thoughts yet Dunc ?
Well yes I have actually :D I have just got a new car , well its not exactly new . Its a 1998 Ford Escort Estate . So yesterday I was taking out the old stereo system from my soon to be scrapped Beemer . The Spirit was great for removing trim and pulling through wires . But it was the butter knife blade that really caught my attention . I had to cut some wire ties and the blunt tip was great because I didn't have to worry about a point digging into the wires while I cut .
Dunc
-
@Magic Bus said:
Any thoughts yet Dunc ?

Well yes I have actually :D I have just got a new car , well its not exactly new . Its a 1998 Ford Escort Estate . So yesterday I was taking out the old stereo system from my soon to be scrapped Beemer . The Spirit was great for removing trim and pulling through wires . But it was the butter knife blade that really caught my attention . I had to cut some wire ties and the blunt tip was great because I didn't have to worry about a point digging into the wires while I cut .
Dunc
I actually really like the butter knife on the Spirit. I think its just its unusual looks that put people off, its a very capable blade.
Neil
-
@Magic Bus said:
Any thoughts yet Dunc ?

Well yes I have actually :D I have just got a new car , well its not exactly new . Its a 1998 Ford Escort Estate . So yesterday I was taking out the old stereo system from my soon to be scrapped Beemer . The Spirit was great for removing trim and pulling through wires . But it was the butter knife blade that really caught my attention . I had to cut some wire ties and the blunt tip was great because I didn't have to worry about a point digging into the wires while I cut .
Dunc
He He GO SPIRIT

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login