What did you use your Sak on today?
-
Trailmaster is on clam chowder duty.

-
Vic Huntsman had a duel with some bananas!

-
Got me some goodies and had to cut them in half,,
JR
-
Nice

-
I am a teacher and use my Spirit X regularly. The scissors are by far my most used tool. I will NEVER carry a multi-tool without them. Also I used the awl for opening a juice bag (not juice box?) those straws can't penetrate.... anything.
Cheers,
H.G. -
Some great uses, you guys

-
I've used the can opener on my Spirit to open various cans for meals, butter blade to cut duct tape and awl to bore out holes to screw in license plates.
-
The Handyman wins again! I used the pliers today to extract an important item from the tight space it had fallen into.
I had been considering substituting a Ranger for my Handyman as work carry to reduce weight and bulk. I hardly ever use the pliers at work - except for problems when they save me or us from going to a lot of trouble to sort out. :P
-
Our roomba wasn't happy because it was clogged from (cat) hair. I used the scissors, pliers and the hook on my XLT to remove that crap from inside of the machine. Now it does again at what its best: It just sucks

@Sawl Goodman: I also like the pliers. Very usable little things!
-
The coffee machine needed some cleaning...

-
Nice, I'm getting a CyberTool 41 soon,

used my Cybertool S that I got some time ago to swap a laptop's hard drive yesterday, works like a dream. And the bit driver feels much sturdier and locks much more firmly than I had imagined. 41 is going to get a lot of use given that is has the other tools I rely on in my Swisschamp, S could make do for a speSmurfpillst, but not general EDC. -
Minichamp took care of an orange today. Yumyum
-
Used the Farmer to break down some wood for a backyard fire. It's getting down in the 60'snow tonight in Phoenix!

-
@El Corkscrew said:
Used the Farmer to break down some wood for a backyard fire. It's getting down in the 60'snow tonight in Phoenix!60' snow in Phoenix? :o
... great pic though El C.



-
In Phoenix, Arizona?
Isn't that one of the hottest cities in the U.S.?
-
It was an auto correct mistake

Getting down into the 60s tonight in Phoenix.Phoenicians are thin-blooded so people start wearing parkas and fur lined boots when it gets into the 60s here.
-
@El Corkscrew said:
It was an auto correct mistake
Getting down into the 60s tonight in Phoenix.Phoenicians are thin-blooded so people start wearing parkas and fur lined boots when it gets into the 60s here.
I hate that auto correct function...especially when I typed it in right and when it changes makes absolutely no sense!
-
@El Corkscrew said:
It was an auto correct mistake
Getting down into the 60s tonight in Phoenix.Phoenicians are thin-blooded so people start wearing parkas and fur lined boots when it gets into the 60s here.
:D
There were folks walking round in shorts and tee shirts in that temp round here earlier this week ;) In fact, that's the temp (15C) that my heating thermostat is almost permanently set to.
-
This weekend saw the two biggest SAKs in my collection getting a chance to stretch their legs.
Saturday morning saw the CT41 help out with dismantling a wire bathroom storage rack and help to assemble a new wooden one to take its place. The can opener screwdriver and the hex bit driver made short work of both projects. The fact that I didn’t have to run to the basement and dig out any tools from my toolbox is the reason the 41 has a permanent home in the kitchen drawer.
Sunday found the Swisschamp answering the call on a few projects. I used the main blade to cut the straps on two boxes containing new bathroom faucets. When I went to use a previously used tube of silicone to seal around the drain on the sink, I noticed it had dried and plugged up the nozzle. I used the main blade to cut the nozzle down a bit, then used the awl start digging out the dried silicone. The fish scaler came out next to push the remaining dried silicone back in to the tube so I could squeeze out the fresh stuff. It cleared the way and I was back in business.
After replacing the faucets,I needed to fix the sun visor on my truck. The internal mechanism that keeps it in either the up or down position had broken and was floating freely, causing the visor to flop down 2/3 of the way. I needed a way to clamp it back down again so I wouldn’t have to hold it up or move it to the side all the time while driving. I used the awl again to scribe a line about an inch long on each side of the sun visor, near the pivot. The I was able to push the awl through the plastic along the line. Next came the backside chisel to clean up the cuts I had just made. I slipped two zip ties through the holes and looped them around and cinched them at the top, pulled them tight with the pliers and cut the excess flush with the main blade again. It took the visor back out to the truck and installed it back up on the driver’s side with the inline phillips.
To top it all off, on my way back in the house I found a dead bumble bee laying on one of the front steps. I immediately pulled out the Swisschamp and removed the tweezers, then flipped open the magnifying lens. I picked up the expired insect with the tweezers and did an up close inspection with the mag lens. I felt like a kid again for a few moments, marveling at the complexity of such a tiny creature, before I found the bee a final resting place in the garden. I think he would have wanted it that way.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login