September Storm: 30 days of Waves
-
September Storm:
I was quite enamoured with Zoidberg's lanyard and big-boy lanyard ring attachment system.....so I made one for myself.

I think Z's split ring does help--the clearance of the thin split ring is better than that of the thicker paracord. However, with Zoidberg's modification, the Wave can just be removed from the lanyard and used "off leash". Obviously this has both advantages and potential disadvantages, but I like this system oveerall and will give this a try for a bit. Might try making a shorter lanyard. This current one--probably a bit longer than Z's--is longer than necessary.

-
@ReamerPunch said:
:o
My screws are fine, but the pivot is a bit tighter since all that wire cutting I did the other day.
It could be worse, considering your screw broke, so I am fine with my pivot. I am not fine with broken screws.If I ever have a screw break, I will ask for a replacement. The screws and wire cutters are not excluded from the warranty, so I expect a replacement.
Have you contacted LM about the screw? It would be interesting to see what they say. Will they replace it or just tell you to buy a new set?
Its a bit of challenge on LM warranty on my side.. Long story.. Not their fault.. I had removed the screw before a few days ago.. It was ok-ish when I put them back so I didn't think that they will loosen up..
I got too engrossed in the wire cutting that I didn't realise they came loose.. I have spare screw.. So thats OK. No losses here.It really really bothers me when the pliers tighten up on pressure. So for me in this case, it's either a break it in, or break it kind of situation.. I am an OCD when it comes to pliers..
-
Yes, the pliers tightening up annoyed the hell out of me on the Wave plus and the Rebar!!!
-
@Sam Lim said:
I broke my screw today..
This was the "new" pliers that I was trying to break in a few day ago with the spring... I was rather desperate to get it looser as I found out it suffers from the "hard squeeze tight pivot syndrome".... I cut a whole bunch of cloth hanger today in my final bid to solve this issue. Very unfortunately.. I didn't realise that my screw had come loose.. The screw snapped.. Half the screw was broken in the pliers. Was able to get it out eventually.. Lucky me..
Check your screws people! And use some form of lock tight in them!
Btw, I had somewhat relieved myself from the challenge a few days ago when I stopped posting pictures. :P 30 days is a challenge too long for me! I missed my other stuffs...

Thanks for the warning Sam

Sorry to hear that you couldn’t finish the challenge
It's actually a relieve..
at least for me.. Not that it's not a good/capable tool, it remains one of my favourite. Just that my love are just spread all over the place.. :DGood luck for everyone on the challenge! 2 more days to go! On my timezone.

-
@Jaypeebee said:
Yes, the pliers tightening up annoyed the hell out of me on the Wave plus and the Rebar!!!Honestly mine is now ALOT better when I first started. I seriously think it's a defect and not about using it enough that it will go away. It seems to me like the internals of the pivot area are out of alignment. Look at your dead pivot side. Are they totally flushed? They should. If it not, I would think the alignment have shifted like mine.
-
Day 28 <<-
Today I've used the Wave's pliers and Phillips bit to remove the batteries from a broken cheapish RC plane. The old style wire cutters had no trouble with those tiny stranded wires





-
@Sam Lim said:
Yes, the pliers tightening up annoyed the hell out of me on the Wave plus and the Rebar!!!
Honestly mine is now ALOT better when I first started. I seriously think it's a defect and not about using it enough that it will go away. It seems to me like the internals of the pivot area are out of alignment. Look at your dead pivot side. Are they totally flushed? They should. If it not, I would think the alignment have shifted like mine.
Yes, mine are better through use, not perfect yet though! The Rebar, I worked some grinding paste into the pivot and worked it for a while then flushed it out and lubricated it, they are perfect now!
-
Day 28/30
Today i didnt find any true use for my Wave, used Wave file to trim my finger nail. No action pic but took pic later in park.
<a href="https://flic.kr/p/28KYUZs" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1909/43160903780_7432985d6a_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Only Tools Matters
-
Hello
Just pinching somebody else's slogan but if the cap fits wear it I say.
Happy day 28
-
I was quite enamoured with Zoidberg's lanyard and big-boy lanyard ring attachment system.....so I made one for myself.

I think Z's split ring does help--the clearance of the thin split ring is better than that of the thicker paracord. However, with Zoidberg's modification, the Wave can just be removed from the lanyard and used "off leash". Obviously this has both advantages and potential disadvantages, but I like this system oveerall and will give this a try for a bit. Might try making a shorter lanyard. This current one--probably a bit longer than Z's--is longer than necessary.

My lanyard was too long as well so I added that knot in the middle.
Now you need to add some lanyard holes to your jacket. :D

-
Day 28 - Used WAVE's SE blade on cardboard in preparation for recycling, and open a 50# bay of Bicarb to add to the pool to increase alkalinity. Then a white birch that had been hit by a vehicle near the parking lot had to be removed, so I used the WAVE's saw blade to salvage three nice straight sections about four feet each for ornamental purposes at home.

-
September Storm:
I was quite enamoured with Zoidberg's lanyard and big-boy lanyard ring attachment system.....so I made one for myself.

I think Z's split ring does help--the clearance of the thin split ring is better than that of the thicker paracord. However, with Zoidberg's modification, the Wave can just be removed from the lanyard and used "off leash". Obviously this has both advantages and potential disadvantages, but I like this system oveerall and will give this a try for a bit. Might try making a shorter lanyard. This current one--probably a bit longer than Z's--is longer than necessary.

My lanyard was too long as well so I added that knot in the middle.
Now you need to add some lanyard holes to your jacket. :D
Another great idea thanks zoidberg

-
@zoidberg said:
My lanyard was too long as well so I added that knot in the middle.Now you need to add some lanyard holes to your jacket. :D

OK, you fooled me. I thought the knot in the middle is where you buried the tag ends of the line. So that's where I buried mine. Now I see you did it slightly differently.......
But, you know what? I like the middle knot, so that's how I'm tying it from now on. :D ;)

-
And the lanyard gets tied to me belt.

I might lose me jacket.
I might lose me pants.
I might lose me shirt.
I might lose me Mickey Mouse harts and stars panties.But me belt and I shall n'er part company whilst I draw me breath.
-
Day 28
Today I used the main blade to poke / stab holes in herbicide containers after triple washing them out . Wave + got soaked in all types of chemicals. Washed and oiled up ( post pic) - good to go!
<a href="https://flic.kr/p/PoAEGb" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1963/31104494978_d2c48a4c6a_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20180928_184856
-
More **Day 28 **action:
It isn't a challenge if I don't cut up a chicken:

The Wave was great for this task. I'll admit that while I tried to be delicate at times, there were also times when I just used the robust PE blade of the blade to power through some joints/bones. My laziness not withstanding, the Wave did good service here.

Full disclosure: the Wave did a great job, but it was a pain to clean out. It was just hard to get every nook and cranny cleaned up with soap and hot water. The Wave just has too many nooks, cracks, and crannies. Still, mad props for cutting up a chicken in no time at all.

Final result was grilled chicken served with a Thai-inspired peanut sauce and a nice sprinkle of cilantro.


Mrs Nix was quite pleased. She says I can keep my Wave. :ahhh
-
Day 28:
I am tired, but the Wave did well today.

-
Hey, it's a Wave. Surf it.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

