September Storm: 30 days of Waves
-
@Antti Lammi said:
Day 29/30Today i used Wave to tighten screw on my daughters pink skateboard few of screws were loose.
<a href="https://flic.kr/p/2aa3UT6" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1978/44078320035_ef16b1f274_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Like i earlier said Wave really needs heavy tool aside of it like ST300, i dont say that Wave isnt good standalone but user like me need sturdier tool to company Wave.
Only Tools Matters
Are you looking for an excuse to get a Surge? :D
Btw, great job with your daughter's skate board

-

So, at this time in the challenge--just one day left--the Wave has become a familiar companion. It's now second nature to pull it out for some small task. The tools have broken in and I can now 'flick' the pliers open with one hand, although it does still require two good flicks of the wrist to get them fully open.
The bulk and weight have disappeared from my consciousness and I sometimes have to check if it's still clipped to my pocket. I updated my Zoidberg-style lanyard, so I can be sure the Wave stays attached to my belt, even if the clip let's it fall out of my pocket. The clip seems to work really well to hold the Wave in the pocket in a comfortable way. I think the clip should come as standard gear with the Wave.
With the thinner lanyard cord, the scissors now lock open, even with the lanyard attached. Nice to have options. :D
I'll do a more thorough wrap-up in the next few days, but this has proven to be a great companion tool for the past 29 days. Good job, Leatherman.

+1 on all points

Nice lanyard too. Looks great with the BO wave

-
I still can’t believe that tomorrow is the
last day of this excellent Wave challenge :'( -
Not much use this early and going through security there won't be much use then either
:D<a href="https://flic.kr/p/2bxezc6" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1943/44985719711_6910a813c7_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>2018-09-29_08-10-41 by Poncho 65, on Flickr
Have a great rest of the challenge guys

Have a nice flight Poncho

-
and be safe

-
@Dutch_Tooler said:
and what a Day 28 it was!Day 29
Not my best pic. Blame it on the speed at which ReWaveR cut that awkwardly located branch, or maybe more truthfully, my general ineptitude when it comes to using two hands to hold a tool and phone at the same time whilst attempting to operate the latter. The saw, in any case, did the job very well. It could only have been better were it motorised :D
Looks like a real action shot DT

-
-
Day 29
The missus circular and adaptable knitting needle came apart at one end. I managed to push the cable back in, but not fully.
To be on the safe side I've used the Waves hard wire notch to crimp it (in pic on the right).
-
@MTMatt said:
Day 29
Today when I went for a walk in the woods
I used the Wave+ saw to cut through
a ivy vine as these are killing the treesNo problems using the saw and
didn’t take long to cut the vineHah, and I thought I'm the only one doing that sometimes

I try to do at least one vine every time I go there

-
Thanks Wspeed

-
@MTMatt said:
Day 29
Today when I went for a walk in the woods
I used the Wave+ saw to cut through
a ivy vine as these are killing the treesNo problems using the saw and
didn’t take long to cut the vineHah, and I thought I'm the only one doing that sometimes

I try to do at least one vine every time I go there

“If you go down to the woods today you’re in for a Wavey big surprise.....”
-
good one FB

-
@MTMatt said:
@Antti Lammi said:
Day 29/30
Today i used Wave to tighten screw on my daughters pink skateboard few of screws were loose.
<a href="https://flic.kr/p/2aa3UT6" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1978/44078320035_ef16b1f274_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Like i earlier said Wave really needs heavy tool aside of it like ST300, i dont say that Wave isnt good standalone but user like me need sturdier tool to company Wave.
Only Tools Matters
Are you looking for an excuse to get a Surge? :D
Btw, great job with your daughter's skate board

I own Surge allready but its not good to pair Wave and Surge cause allmost same toolsets. ST300 is heavy duty and has bit diffrent toolset and only inside tools so it just pairs better with Wave
Only Tools Matters
-
This challenge is ending on a high... Great job reporting and pictures everyone.
Day 29 - Talk of the lanyard loop of the WAVE reminded me that I use a clip hook with para-cord lanyard during the winter months when I was working construction. Not possible or practical to carry on belt in sheath with Carhart style bibs and jacket. I always looped lanyard onto the hammer loop and place ST300 in long pocket.. Could also do the same with the WAVE, SURGE or REBAR.
This style of clip was easy to disconnect with gloves on in cold weather, and to reattach when done.
PS: the lanyard cord is missing, last winter late, used the lanyard cord to secure a young lady's upper arm after fall on ice at my job site. Separated shoulder or broken collar bone. Paramedics left my make shift sling and strap in place during transport.
Also, posing shot in tree after trimming some dead limbs and sucker starts.



-
Day 29
Used the metal saw to cut through a length of draught excluder brush and also opened a paint tin!!
Nearly there..........

Well done everyone




-
Thanks for all the well wishing guys

It is only a few hours from being the 30th here so I am going to just put a pic now so I dont wind up forgetting it when I get back ::) :D

-
Day 30 of 30
Final day pic

Been an awesome challenge guys and I will put my thoughts of the Wave when I get back
in a nut shell I love the Wave but will elaborate more later ;)<a href="https://flic.kr/p/2aawK8t" target="_blank" rel="noopener noreferrer"><img src="https://farm2.staticflickr.com/1919/44083750365_1826ec58fa_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>2018-09-29_05-39-08 by Poncho 65, on Flickr
-
Well done Poncho.......

-
First one to finish nice one Poncho

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login