Project: Hobby Desk
-
Like it

-
@gerleatherberman said:
50ft,
If that is chaos, then I cannot post pics of my workbenches. My idea of cleanup is to push everything to the side, and then when I can't do that anymore,** I put stuff back where it goes.**
Can't wait to see how your new project desk works out for you. It is hard to beat a workspace that is taylored to your needs.

"Where it goes" is certainly a challenge! Storage was one of the things I knew I'd have to get my head around first, and is very much work in progress.
I managed to clear off a couple of shelves of cupboard space for the larger items, such as drill sets. In there already is my pop riveter, sewing box, leatherwork tin, some drills and dremel accessories, and a couple of rolls of emery, vernier/micrometer set ... but there's a lot more to go in there.
I also managed to squeeze some lightweight storage in between the cupboard and desk, and that's started to fill up too...


-
Top shelf: Saws
I still need to rustle up the spare blades which are lurking in various tool bags and boxes, and I also have a tile saw for hard materials somewhere

-
2nd Shelf: Persuaders
I still have another smaller ball pein hammer to track down, and I don't expect to need to need any universal adjusters much bigger than this. If I do, they're not a long walk from where I'll be sat.

-
3rd Shelf: Abrasives.
I have enough in here to get me started, along with the two rolls in the cupboard. I also have some micro mesh on the way, which will help fill on some of the gaps from the 60 grit - 240 grit cloth, down to the 1 micron lapping film I used to finish my straight razor. The granite tile I use for the lapping type work, will live on the slide our keyboard shelf beneath the desktop.

-
4th Shelf: Assorted veneers
I also have some other materials on route for inlaying, specifically white mother of pearl, and more colourful abalone.

-
Bottom shelf: Brass
I'll be keeping the pin stock in some small drawers on the desk top, but the bulkier pieces will live in here. I'll also be adding some nickel silver, and possibly stainless too, as time progresses.

-
Of the five drawers below, only two have anything in yet. Both of them are scale materials. Top drawer has the woods, which is currently walnut, wych elm burr, olive, teak, and lignum vitae. The next drawer has glow in the dark kirinite, buffalo horn, stag, carbon fibre laminated resin, a big of yellow G10 PCB material, and a bit of Tony's homemade micarta.


-
There's not a huge amount of storage available above the desktop, unfortunately. The two shelves will probably end up having reference tables, "the bible" (Machinery's Handbook), and a few writing materials. I might have space left to keep the oils and greases and cleaning stuff up there too. The alcove at the bottom, will hopefully be big enough for stowing the mini-mod-maker in (mini lathe/miller tool).
The backboard around the desk is just hardboard, so that's pretty much useless for storing much other than what 's already dangling there.
I have had a plan to create a little more storage though... which I'll show you if it works, and deny any knowledge of if it doesn't :D

-
With me having my back to the main light in the room, I wanted to avoid shadows. Thankfully, the lamp on the side shelf does a decent job of illuminating the area with it being so high, but the halogen lamp will devour electric. I've got a little LED lamp on the way for it though, which will pay for itself in a very short space of time. I also have other small lamps available should I need them. The pic is with just that one lamp on.

-
Looking good,
JR -
Thanks buddy

Just don't be getting me in trouble with Sabrina, if you get ideas of expanding your little domain from this thread :D
-
@50ft-trad said:
Thanks buddy
Just don't be getting me in trouble with Sabrina, if you get ideas of expanding your little domain from this thread :D
Lol, well I did kinda get a new toy today

Me and the little guy hit a few tagsales and I found a Flexible Shaft Rotary Tool, kinda like a Dremel, but a little more umph, heck it was only $4.. heck the case she threw I alone was more..
JR
-
@50ft-trad said:
Thanks buddy

Just don't be getting me in trouble with Sabrina, if you get ideas of expanding your little domain from this thread :D
Lol, well I did kinda get a new toy today

Me and the little guy hit a few tagsales and I found a Flexible Shaft Rotary Tool, kinda like a Dremel, but a little more umph, heck it was only $4.. heck the case she threw I alone was more..
JR
that looks useful mate.Does it take dremel tools... and have you got any? :D
-
@50ft-trad said:
@50ft-trad said:
Thanks buddy

Just don't be getting me in trouble with Sabrina, if you get ideas of expanding your little domain from this thread :D
Lol, well I did kinda get a new toy today

Me and the little guy hit a few tagsales and I found a Flexible Shaft Rotary Tool, kinda like a Dremel, but a little more umph, heck it was only $4.. heck the case she threw I alone was more..
JR
that looks useful mate.Does it take dremel tools... and have you got any? :D
I’m guessing it will, it has a mini adjustable chuck just like a drill just smaller, yet it doesn’t have a key, but I don’t think you can cheat by squeezing the chuck with your hand and reving the drill to tighten or loosen,
I do have a Dremel with a few tools, here’s my little setup, all in one box including a workstation!
JR
-
Excellent. At least you've got something to use with it. I'd track down a mini chuck key if I was you, relying on that engine to do it will probably end in tears... yours :D
-
Very nice so far, 50ft!

You are inspiring me to do something with mine. All my stuff is where I sat it when I first got it. And like yours, it got chaotic very quickly. I have some divider cubbies sitting on the floor right now and that would be perfect for sorting some of the rotary tool stuff.
I have a couple days off Mon and Tue, so might have to make my workbenches practical once more. It'll be like the Phoenix Rising to get them sorted.
I like how you are thinking through what you need with it as well. I have kicked myself for bolting a second vise to the same table for eons(it looked cool though), so that would be a good starting point (to make the secondary vise removable). :)
Cheers, 50ft!
-
@50ft-trad said:
Excellent. At least you've got something to use with it. I'd track down a mini chuck key if I was you, relying on that engine to do it will probably end in tears... yours :DProbably, especially when the Mrs cleans it with alcohol! I’ll have to give it a good look down tomorrow, of corse after giving it a good cleaning, but the Mrs wants to do something and the little guy wants to break down my old r/c cars especially now since he’s in robotics. But he’s wanted at them for ages.
JR -
@gerleatherberman said:
I like how you are thinking through what you need with it as well. I have kicked myself for bolting a second vise to the same table for eons(it looked cool though), so that would be a good starting point (to make the secondary vise removable). :)I'm a bugger for overplanning stuff. Always have been. Some of the mods that I'm hoping to do, are stuff I've been thinking about for years. Seriously, four or five years in some cases. Also, I don't just want it to be a modding bench. I want to be able to do leatherwork, or dabble with artsy stuff, or even do paperwork or use my laptop there, so it needs to still be usable as a desk. There's going to be a lot of function happening in a very small space, and it does take thought to ensure the versatility... but having designed a narrowboat interior, I'm quite used to that :D
It also gives me a reason to sort through all my tools. Since I got ill, everything has just sat there unused, and it makes good sense to sort what I can use from what I can't, and decide whether to sell the stuff that's too heavy for me now, or whether I can repurpose it in some way. There's other stuff just lurking too (that back bedroom is a dumping ground for stuff), and as I need more space, it's forcing me to deal with stuff that's just (metaphorically) festering away.
Good to hear it's motivating for you. I hoped it might get motivating later on, but didn't expect anyone to catch the bug quite so quick :D
-
Thanks, 50ft!

Ehh, spent some time working on the two main spaces. What a mess.

I'll do some more Monday. That little bit wore me out. I did clean two of them off, but only did some minor rearranging. :ahhh
I hope your project is going well, 50ft!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

