Project: Hobby Desk
-
Thanks guys. If you feel like throwing up some pics of your own workspaces, go for it

-
The desk area is a long way from finished, but at least it's now functional. I had a little mod to do from my sales thread, and this will be going out to its new owner tomorrow.

-
Tomorrow, I've got to clear it all of completely, and catch up on some important paperwork - or at least start it. I've been spending too long doing other things, and there's probably a few days work for me, depending how well the brain is functioning.
Also... I need all your input on something...
I've thought about trying to do vids of the mods, which means smurfing around with YouTool, even though I hate anything associated with the parasitic little turds that own it. But this got me thinking about titles and such like...
You see, I don't go by the name of 50ft-trad everywhere, and I'm on another forum (a shaving forum) under the old name I've used online for many years before being 50ft-trad - AimlessWanderer. I no longer have a boat, so the 50ft-trad name isn't really relevant to me anymore, but even though I used AimlessWanderer before I developed a balance disorder, and the other neurological issues (it was more a reflection of life philosophy), it does seem even more apt now :)
So do I just use that name there (if I go ahead with it) or do I use it here too?
... and how much of a PITA is YouTool to use... or is there any other options for embedding vid clips on the forum?
-
Uploading clips to the ‘tube is fairly painless once you find the upload button.

-
Yeah, I have provisionally set up a channel, just to secure the name, and you don't seem to get a lot of controls. I noticed there was no log out button ::) but that didn't stop me clearing my cookies and rebooting my router...
-
@50ft-trad said:
Yeah, I have provisionally set up a channel, just to secure the name, and you don't seem to get a lot of controls. I noticed there was no log out button ::) but that didn't stop me clearing my cookies and rebooting my router...Click on your icon (top right) and it's the fifth one down
-
@50ft-trad said:
Yeah, I have provisionally set up a channel, just to secure the name, and you don't seem to get a lot of controls. I noticed there was no log out button ::) but that didn't stop me clearing my cookies and rebooting my router...
Click on your icon (top right) and it's the fifth one down
I was logged in on my phone and didn't see it, so now I know one exists, I'll only log in from my laptop now.

-
Whatever you feel is the most applicable preference of username seems to always be a good direction to take with new usernames. 'AimlessWanderer' would be easier to remember for potential viewers of the videos. To me, personally, that username would be hard to forget. That's a good thing.

Good luck with the paperwork, 50ft!
-
@gerleatherberman said:
Whatever you feel is the most applicable preference of username seems to always be a good direction to take with new usernames. 'AimlessWanderer' would be easier to remember for potential viewers of the videos. To me, personally, that username would be hard to forget. That's a good thing.
Good luck with the paperwork, 50ft!
Thanks GLBM

Just there, or here too?
I thought about changing the name here when I sold the boat, but as I wasn't using different names on multiple sites, it didn't seem necessary, so I never bothered. However, now it might be more relevant, particularly if anyone viewing a vid on YouTool comes here looking for my posts (I plan on disabling comments on my videos, and directing them to MTO (or wherever the project is relevant to) for comments and discussion instead. If I'm AimlessWanderer there but not here, it might get confusing for them.
On the flip side, it might be confusing to people here, after being 50ft for so many years...

-
So far the most frustrating part of the storage puzzle, is the issue of small tools. Here (in the attached pic) are just a few of what I want to hand. I think the pin punches and small files should be in a simple rack - a lump of wood with holes drilled in, but there are many more things that i'd prefer to have within arms reach. I'm still not quite sure how to square that circle.
For general storage, and space to put the drill press, I dragged my coffee table up from downstairs, and dug out a shelving unit which wasn't being utilised. That should round the area off nicely I think, though I do need to check the drill press has the space it needs with the shelving unit there, but that was enough heavy lifting for one day.
If that works, I need to get some brackets, and fix those shelves to the wall on a "good health day", as even though it's quite a sturdy table, I think a drill press and full shelving unit will be pushing it somewhat.


-
Looking good!

Me and the little guy started with the r/c cars, and since we found another table for dinning he got to other table for working on
JR -
@50ft-trad said:
Thanks GLBM
Just there, or here too?
I thought about changing the name here when I sold the boat, but as I wasn't using different names on multiple sites, it didn't seem necessary, so I never bothered. However, now it might be more relevant, particularly if anyone viewing a vid on YouTool comes here looking for my posts (I plan on disabling comments on my videos, and directing them to MTO (or wherever the project is relevant to) for comments and discussion instead. If I'm AimlessWanderer there but not here, it might get confusing for them.
On the flip side, it might be confusing to people here, after being 50ft for so many years...

Ya know, that is a good way to look at the question. Honestly, I think most of us would get used to you changing your username eventually, but it would definitely be confusing to members who don't check-in often.

Perhaps '50ft Aimless Wanderer' would suffice as an alternative option to the username conundrum? It hearkens back to the current username and simultaneously connects the 'Aimless Wanderer' Youtube channel and the 50ft-trad name used here(think of it like dual-inclusion).Seems like you have it going on with the workspace.

I did a little more cleaning this morning and am excited about having some workspace(I am going to shamelessly take you up on the offer to post our inspired-workspace photos here).





-
Good looking workspace
Looks like you've got a decent bit of kit in there too, including a fair few tapping bats as well :D -
Looks nice glbm. Hey have you ever worked with one of those motor things I posted a few posts back?
JR -
@50ft-trad said:
Good looking workspace
Looks like you've got a decent bit of kit in there too, including a fair few tapping bats as well :DThank you, 50ft!

@MadPlumbarian said:
Looks nice glbm. Hey have you ever worked with one of those motor things I posted a few posts back?
JRMy father has a rotary tool like the one you posted, but his is much older. I am not familiar with the chuck and key system I am seeing there.
Could you post a photo 'head on' of the chuck assembly?
My older model Black and Decker rotary tool has the transformer and speed pot in the case you see on the top right in the photo with the cubbies. The wire goes to the motor assembly and chuck, but it has a keyless chuck and lock pin to stop the spindle from rotating. My backup rotaries are in the toolbox (corded and cordless).
I would like to have a hangup motor rotary tool at some point, but I haven't had the need for the higher torque and RPMs yet.
If I had one, I'd keep it plugged into the Variac(variable transformer) for some speed control. I have a bad habit of letting rotary bit jump all over the place at high speed. :ahhh
That Porter Cable rotary tool looks to be very good, JR.
-
You guys are so lucky with all the space... This little makeshift desk is all I have for thinking and fittings... The filing and cutting work have to be done outside of the house in the common area... Shared with a lazy neighbourhood cat...


-
Until recently, Sam, all my mods were done on a tray while sat in an armchair, or sat at the kitchen table. For drilling and cutting, I had go go outside and clamp stuff to the garden fence for a bit of stability, and peening was done on the doorstep. So I'm certainly familiar with building in limited space. :D

-
@50ft-trad said:
Until recently, Sam, all my mods were done on a tray while sat in an armchair, or sat at the kitchen table. For drilling and cutting, I had go go outside and clamp stuff to the garden fence for a bit of stability, and peening was done on the doorstep. So I'm certainly familiar with building in limited space. :D
Every thing u did sounds ultra familiar...

-
@Syncop8r said:
Perhaps just stay "50ft-trad" on here (as changing may confuse a lot of MTO members) and put (or link) Aimless Wanderer on your signature.@50ft-trad said:
If I do need more rigidity, all I need to do is throw on a G cramp to lock it down.
... that was probably my phone being "helpful" ::) I was typing earlier, and noticed that it completely dropped three whole words from earlier in the sentence...

Thanks for the name change feedback

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


