What Is The Oldest Knife You Own,That You Bought New?
-
@AimlessWanderer said:
The first knife I got was one of my grandfather's old knives, but that is long since lost.The second, was the lambsfoot slippie in the attached picture
The other in the picture is the first knife I bought for myself. It's an off-brand liner locker, which I probably got a year or two after the other one, and it too has done a fair bit of cutting work over the years. It's now one of my "dirty work" knives, for when I don't want to risk ruining something nicer, and it still works fine.
Nice pic and story AW!

-
@David said:
Lots of good storys guys.This is the earliest knife I bought new and still have. I saw the Buck 110 in the display at the Sporting section of a store in Oswego, Ks. I was there with my grandpa. When I saw this knife I thought it was the most beautiful knife I'd ever seen. About a year later in 1974 I was 18 I was over at my grandpas again and couldnt wait to get down to the store and buy one of those Buck 110's. It cost 25.00 if I remember correctly which was a lot of money in those days for a knife.
Nice pic and great story David!

-
A large and a small stockman was my carry for many years.
These are the two oldest that I still have an 80T and a Buck 303. I gave my older knives to my nephews a long time ago.

-
the stockmans Dean. 
-
More great stories.

-
There must be more members who still own a knife they bought new years ago.
-
A large and a small stockman was my carry for many years.
These are the two oldest that I still have an 80T and a Buck 303. I gave my older knives to my nephews a long time ago.

Thanks for participating Dean.
What year did you buy your stockmans?
You made me look and I found a few more stored in a treasure box I forgot about.
On a couple early jobs I used a knife a lot and a couple of my older knives got used up and just dropped in with the scrap steel at work or given away.
The Buck 303 is 1993, I don't remember exactly the Old Timer's age but probably early 80's. Plus or minus my depending on my memories margin of error.
It varies.
A gray 2 spring Buck is 1987 and the black 1993 flat ground 3 spring. The 2 spring is a better knife only because its noticeably thinner behind the edge.
They're both in real good shape because they were watch pocket clean knives aka back ups.The 503 Prince is a 1994 it's the only one with a story, it's a replacement for a 503 I bought a years earlier. I tried to re grind the tip on it. I had to try grinding the tip because I used it as a screw driver and broke the tip. The regrind didn't work by the way.
Once upon a time late 70's or so. Me and a friend put his dads boat on the Missouri river at Parkville, Mo. and headed east. It was a 16” runabout with a vintage 1964/65, 40 horse Evinrude. Did I mention in those days boats were not required to have flotation, we didn't have ant either. Well half way to K.C we broke down. At that time of year and that close to K.C.MO. the Missouri has a lot of barge traffic. Not to mention eddy's that could grab a drifting aluminum boat and spin it in circles. At least until a barge knocked you free of it or it sucked you under. After a mile or so we got the carburetor adjusted, got it running and turned around. Fun day. :D


-
Great story Dean !

-
A large and a small stockman was my carry for many years.
These are the two oldest that I still have an 80T and a Buck 303. I gave my older knives to my nephews a long time ago.Thanks for participating Dean.
What year did you buy your stockmans?You made me look and I found a few more stored in a treasure box I forgot about.
On a couple early jobs I used a knife a lot and a couple of my older knives got used up and just dropped in with the scrap steel at work or given away.
The Buck 303 is 1993, I don't remember exactly the Old Timer's age but probably early 80's. Plus or minus my depending on my memories margin of error.
It varies.
A gray 2 spring Buck is 1987 and the black 1993 flat ground 3 spring. The 2 spring is a better knife only because its noticeably thinner behind the edge.
They're both in real good shape because they were watch pocket clean knives aka back ups.
The 503 Prince is a 1994 it's the only one with a story, it's a replacement for a 503 I bought a years earlier. I tried to re grind the tip on it. I had to try grinding the tip because I used it as a screw driver and broke the tip. The regrind didn't work by the way.
Once upon a time late 70's or so. Me and a friend put his dads boat on the Missouri river at Parkville, Mo. and headed east. It was a 16” runabout with a vintage 1964/65, 40 horse Evinrude. Did I mention in those days boats were not required to have flotation, we didn't have ant either. Well half way to K.C we broke down. At that time of year and that close to K.C.MO. the Missouri has a lot of barge traffic. Not to mention eddy's that could grab a drifting aluminum boat and spin it in circles. At least until a barge knocked you free of it or it sucked you under. After a mile or so we got the carburetor adjusted, got it running and turned around. Fun day. :DVery cool Dean. I really like that gray Buck,I've never seen one like that before.Congrats.
Your story on the river rivals the one we had on a canal in Florida,when we were kids.That's for another time though.
-
A large and a small stockman was my carry for many years.
These are the two oldest that I still have an 80T and a Buck 303. I gave my older knives to my nephews a long time ago.Thanks for participating Dean.
What year did you buy your stockmans?You made me look and I found a few more stored in a treasure box I forgot about.
On a couple early jobs I used a knife a lot and a couple of my older knives got used up and just dropped in with the scrap steel at work or given away.
The Buck 303 is 1993, I don't remember exactly the Old Timer's age but probably early 80's. Plus or minus my depending on my memories margin of error.
It varies.
A gray 2 spring Buck is 1987 and the black 1993 flat ground 3 spring. The 2 spring is a better knife only because its noticeably thinner behind the edge.
They're both in real good shape because they were watch pocket clean knives aka back ups.
The 503 Prince is a 1994 it's the only one with a story, it's a replacement for a 503 I bought a years earlier. I tried to re grind the tip on it. I had to try grinding the tip because I used it as a screw driver and broke the tip. The regrind didn't work by the way.
Once upon a time late 70's or so. Me and a friend put his dads boat on the Missouri river at Parkville, Mo. and headed east. It was a 16” runabout with a vintage 1964/65, 40 horse Evinrude. Did I mention in those days boats were not required to have flotation, we didn't have ant either. Well half way to K.C we broke down. At that time of year and that close to K.C.MO. the Missouri has a lot of barge traffic. Not to mention eddy's that could grab a drifting aluminum boat and spin it in circles. At least until a barge knocked you free of it or it sucked you under. After a mile or so we got the carburetor adjusted, got it running and turned around. Fun day. :DVery cool Dean. I really like that gray Buck,I've never seen one like that before.Congrats.
Your story on the river rivals the one we had on a canal in Florida,when we were kids.That's for another time though.
To many stories like that would be a derailment for sure. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

