Brass Rod NOW!!!
-
Bah...wimps!

Back in the day we used to make our own pins by chewing empty brass cartridges...while walking barefoot in the snow... :D
-
...sometimes we were chased by Polar Bears too :D
-
... and those must have been the good times, cause you would force the bears to chew the brass for you... :D
-
Yeah...otherwise we would have to swallow the brass and extrude the correct diameter pinstock ourselves... ::)
-
I'll get my coat...
-
@Ben X said:
According to google:2.2 millimeters = 0.0866141732 in
And they sell .081in brass rod, so that's good enough for me to try, Gareth said he has a local place that sells 2.2mm and it it a negligible difference. Anyway,
to you Scibeer, I ordered what I understand to be 384 ft of brass rod, a lifetime supply, I hope :P Now I just need to get a smaller drill bit so I don't mess up anymore center bushings and I will be set for life! Thanks a million!!! 
384 feet :o I hope they cut it up before they try to deliver it.
I have no idea what size my pinstock is. Rotokid sorted me out with a selection, but I'm pretty sure I've about 4 or 5 different diameters. I don't have huge amounts of it, but I'd happily let you have a little if I have the right size Ben. I can spare enough to do an SAK or two I'm sure.
-
-
-
Thanks Dave, that's very kind of you, I will let you know if the stuff I have coming for some reason will not work, and I certainly would compensate you appropriately as well :D
And yes, they cut it up, I wanted it all in one piece but they didn't think the UPS truck would make his turns too well. Plus I live in a 12x10 cell, er, dorm room, I mean... :P
Well thanks again, Scibeer, if all goes well, in 5-9 business days I will be hammering out a few mods I've already sketched :D So lots of SAK porn in the forecast, especially with Spring Break rapidly approaching as well.
-
Wow, I find my title highly ironic- I ordered the rods yesterday LATE afternoon- had a message this morning from the campus post office that I had a UPS package! Talk about FAST! Literally, in under 24 hours, it went from Georgia to Tennessee! So, I got just what I needed!
<---- That was me this morning. Oh, and I misread the site, it was 16 feet of each, but still, easily a year's supply (maybe). I can't wait to get started! Thanks all for the help. Now I have to make some tough choices about which SAKs are going to to operating room >:D -
Glad you managed to get some Ben. Looking forward to the next mod.

-
Whew, alright, it's already put together, at least I put the layers all together on the pins, but now what? Last time one side was already peened, but not so now. Right now it's just 4 rods sticking through the knife holding it together. What next?
Btw, a little teaser, it's leftover Champ parts, so I made a pseudo Lumberjack (of sorts):
Layer 1: Large blade, small blade, corkscrew
Layer 2: Wood saw, chiselSort of a woodworker knife, all cutting blades (save for the corkscrew... I guess it's meant to screw into cork, a sort of wood :P )
Hopefully I can find my dang ball pien hammer, I know it's around this room somewhere... -
@Ben X said:
Whew, alright, it's already put together, at least I put the layers all together on the pins, but now what? Last time one side was already peened, but not so now. Right now it's just 4 rods sticking through the knife holding it together. What next?Btw, a little teaser, it's leftover Champ parts, so I made a pseudo Lumberjack (of sorts):
Layer 1: Large blade, small blade, corkscrew
Layer 2: Wood saw, chiselSort of a woodworker knife, all cutting blades (save for the corkscrew... I guess it's meant to screw into cork, a sort of wood :P )
Hopefully I can find my dang ball pien hammer, I know it's around this room somewhere...This is where Gareth and I differ in approach (both work mind). I like to cut the brass 1 to 1.5mm proud of the bushing either side and then then a few taps to one side, turn the knife over and a few taps to the other, repeat 'till right. Gareth likes to take a longer bit of brass and dome one end first, pop it in place, cut to size and then peen from that side. (I'm sure he'll correct me if I'm remembering that wrong). Either way it really isn't any more difficult than working on a knife that already has been factory peened on one side.
Really, you'll be fine

Neil
-
Someone else (I think Spork?) leaves part of the rod unmilled, so that he has a thicker portion on one side. Won't work if you have the right size brass though...
-
@Ben X said:
Whew, alright, it's already put together, at least I put the layers all together on the pins, but now what? Last time one side was already peened, but not so now. Right now it's just 4 rods sticking through the knife holding it together. What next?
Btw, a little teaser, it's leftover Champ parts, so I made a pseudo Lumberjack (of sorts):
Layer 1: Large blade, small blade, corkscrew
Layer 2: Wood saw, chiselSort of a woodworker knife, all cutting blades (save for the corkscrew... I guess it's meant to screw into cork, a sort of wood :P )
Hopefully I can find my dang ball pien hammer, I know it's around this room somewhere...This is where Gareth and I differ in approach (both work mind). I like to cut the brass 1 to 1.5mm proud of the bushing either side and then then a few taps to one side, turn the knife over and a few taps to the other, repeat 'till right. Gareth likes to take a longer bit of brass and dome one end first, pop it in place, cut to size and then peen from that side. **(I'm sure he'll correct me if I'm remembering that wrong). ** Either way it really isn't any more difficult than working on a knife that already has been factory peened on one side.
Really, you'll be fine

Neil
Don't worry you got it right. :D .
-
That's definitely the tricky bit for me anyway. I tend to use Neil's method, leaving a couple of mm over on each side, but then I take a dremmel sanding bit to each end and flatten them down to about 1mm above the bushings. Then, I peen with a ball pein hammer, using a miniature anvil I picked up cheaply to form a nice neat finish.
All different routes to the same end product

-
Actually Dave makes a good point. Before you start peening make sure you have a nice flat end on the pin. If you have just clipped it to length with snips then it will be horribly uneven. Take a few minutes to flatten the end and the result will be much nicer and , more importantly, easier. I simply use a file but if you've got a Dremel type tool that should make life even simpler.
-
Gareth and I are doing it correctly...I have no ideal what Neil and the Bees are doing
:o :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login