Show me your drills
-
Besides the new cordless set, I forgot I do have a simple corded, a drywall, and a very big hammer drill like Reinier’s but a dewalt out in the garage,
JR -
@Reinier said:
These are mine. Three 10.8V cordless drills (the current models are marketed as 12V but are basically identical). One of them is an impact driver. I really like these small machines, they are very light but still plenty powerful for most of the jobs. But to be honest I've been thinking about adding a couple of 18V machines.
I've had that drill and impact driver for years and almost always reaches for them over the 18v ones. They are surprisingly powerful, even drive 3 inch screws easily (although battery runs down quickly). I only go for the 18v when I need to drive more than a few, or bigger holes than a standard twist drill bit, or change my tires.
Most people would be well served by a set of 12v brushless drill/impact driver.
-
The impact driver is not powerful enough for these things though: https://www.toolstation.nl/shop/Screws+%26+Fixings/d90/Plugs/sd2040/Fischer+SXR+T+kozijnpluggen/p59898?lnjs=nl&p=59898&sd=2040&d=2040
I always need to use the corded hammer drill for those instead. Which is not really recommended. -
@Reinier said:
The impact driver is not powerful enough for these things though: https://www.toolstation.nl/shop/Screws+%26+Fixings/d90/Plugs/sd2040/Fischer+SXR+T+kozijnpluggen/p59898?lnjs=nl&p=59898&sd=2040&d=2040
I always need to use the corded hammer drill for those instead. Which is not really recommended.That's surprising to hear, the 12v impact driver should have more torque than most drills.
But the 18v brushless impact driver will be able to handle any screw you have.
-
I have and use many,many drills but this might be my favorite of all time in the end?
Milwaukee D-Handle with 30 degree extension.
It is corded but the cord is detached here and I have 25' and 50' cordsets for it.
This can drive a 4" Auger or 6' or almost any bit through wood with almost no effort at all as the torque is eaten by the extension pretty much.this hardly feels nails and rarely stops for them either.
Also I do not need a ladder to drill Joists many times or to hit my knees for plates or horizontal runs.Overall just an amazing drill.
The Stud Buster!

Sent from my iPhone using Tapatalk
-
That is a sweet drill !

-
Here is the Bosch that is my main go to these days. I like that it has enough room in the case for lots of extra bits and even a small drill bit case.
Next is a off brand hammer drill since I don't use one very often it works just fine
Next is a vintage Sears pistol drill that I picked up at a garage sale. Quite heavy but still works great




-
Late 90's DeWalt DC727 on it's second motor and umpteenth battery.


-
And early 90's Craftsman 1/2" for the heavy duty stuff.


-
Late 90's DeWalt DC727 on it's second motor and umpteenth battery.

I liked the 90s dewalts - they were the epitome (epitome, is that the right word?) of cool back then.
I bet that chuck's annoying though, it looks like a dropper!?I don't use the DeWalt chuck very often, it's keyless but I use the hex adapter mostly. The adapter is a Kreg, it works well.

The chuck on the 1/2" drill is a monster, I've had to hammer on the key a few times.

-
Late 90's DeWalt DC727 on it's second motor and umpteenth battery.

I liked the 90s dewalts - they were the epitome (epitome, is that the right word?) of cool back then.
I bet that chuck's annoying though, it looks like a dropper!?I don't use the DeWalt chuck very often, it's keyless but I use the hex adapter mostly. The adapter is a Kreg, it works well.

The chuck on the 1/2" drill is a monster, I've had to hammer on the key a few times.

Nothing wrong with a bit of persuasion!

-
Late 90's DeWalt DC727 on it's second motor and umpteenth battery.

I liked the 90s dewalts - they were the epitome (epitome, is that the right word?) of cool back then.
I bet that chuck's annoying though, it looks like a dropper!?I don't use the DeWalt chuck very often, it's keyless but I use the hex adapter mostly. The adapter is a Kreg, it works well.

The chuck on the 1/2" drill is a monster, I've had to hammer on the key a few times.

Nothing wrong with a bit of persuasion!

I don't mind being rough with this drill, it's put the hurt on me more than once ripping out of my hand... >:D
-
This is my latest drill, it's a Bosch drill press (wrong color, green instead of blue ;) ). It's supposed to be pretty good for its price (I got a great deal on Amazon):

-
That's awesome! I have been wanting a drill press for years but never really got around to pulling the trigger. I have my eye on one on Amazon too...

Is that 8 or 10 inches?
Def
-
@Grant Lamontagne said:
That's awesome! I have been wanting a drill press for years but never really got around to pulling the trigger. I have my eye on one on Amazon too...
Is that 8 or 10 inches?
Def
Get one of those setups that use a standard drill, I had one back in the day, they ain’t the best but still work..
JR -
I thought about that but I figure if I'm going to get one I'll get a dedicated one. I hate universal things that only sort of fit everything.
The only benefit I see with that kind of setup is the ability to use it wherever with a cordless drill, but then I want a drill press for drilling things that my cordless won't do as well. That means I'd have to use my corded DeWalt in it, and if it isn't portable then I might as well have a dedicated one.
Def
-
Some very interesting and well-loved drills in this thread.

Post 1/2




-
Post 2/2.
I often use rotary tools for drilling holes at high speed in wood. :)


-
Love that big drill press!
The more they look like a droid from Star Wars the cooler they are IMHO!
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login